similar to: Odd issue with VirtualBox+9-STABLE+bce ...

Hi. On one of my fresh installed servers I am seeing the following output during boot: gptzfsboot: error 4 lba 30 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 30 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot:

Since last upgrade, I see much more CPU time "eated" by interrupts (at least 10% cpu in top) (see http://dgeo.perso.ec-marseille.fr/cpu-week.png) The server behave correctly (Or seems to?), and high interrupt number seems to come from bce cards (source: systat -vmstat) I just upgraded from "RELENG_7 Mon Sep 8 12:33:06 CEST 2008" to "RELENG_7_1 Sat Nov 29 16:20:35 CET

Recently under amd64 and 9.1-STABLE I am seeing issues with the bce driver. Message is "Warning: bootcode thinks driver is absent". After this message, the box appears to be wedged. After rebooting, it got the same message during fsck. So we installed 9.2 pre-release using a snapshot iso from 7/13/13. Shortly after boot we got the same message. We are now in the process of

Howdy folks, this email is a follow-on to a 3-month-old thread about kernel page faults from the bce driver[0]. 0: http://lists.freebsd.org/pipermail/freebsd-stable/2013-March/072713.html Sorry to revive such an old thread, but a couple of bits of new information has come to light here that may be useful for others. The header splitting suggestion that Marius Strobl made[1] did fix the kernel

Hi, After changing cables,switches,ports, I came to the conclusion that bce is reporting input errors that are not there, or creating them. I checked this with 3 different boxes, all Dell-2950/Broadcom NetXtreme II BCM5708 1000Base-T (B2), and one of them, while running Solaris, reported 0 errors after a week, and freebsd after a few minutes its count was > 100. The errors appear under

Hi, tuning my network fixing nic's speed and duplex (both on server and switch) i got this error with bce driver: # ifconfig bce0 bce0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4> ether 00:15:c5:fe:11:01 inet 192.168.1.13 netmask 0xffffff00 broadcast

well, I tried to narrow this down a bit by removing lagg from the equation, but the switch requires LACP to be active on those ports so I can't test in isolation unfortunately. Is anyone running 7.2 on a DL360 G5 with working ether ? -pete.

hi i've configured a Beronet BN8S0 Card with misdn beronet utility. the card is configured with all lines in TE and P2P mode, and it is connected with the special cable with an ISDN connection. i've turned on debugging to level 4, this is the output from the asterisk cli when i receive a call: P[ 5] MGMT: Short status dinfo 1000001 P[ 5] MGMT: SSTATUS: L1_ACTIVATED P[ 5] handle_frm:

Hello, After upgrading my kernel to mISDN-1.1.1 while keeping asterisk-1.2.16 I no longer match any extension. Apparently the "dad" is empty. However I can see the number just before it (146472130): P[ 4] I IND :SETUP oad:!?145201798p ?146472130 dad: ?146472130 pid:2 state:none P[ 4] EXPORT_PID: pid:2 Mar 23 09:35:28 WARNING[6725]: chan_misdn.c:4750 chan_misdn_log: Extension can

Hi. I'm running Asterisk server with 10 sip phones, and 2 grouped T0 lines with 10 DDI numbers. My provider is France Telecom and my setup is : - Debian Lenny - Asterisk 1.4 - Linux kernel 2.6.25.17 - mISDN 1.1.8 driver - Sip phones Thomson ST2030 No problem with the SIP . But when reveiving a call on RNIS line (any of the DDI numbers), the associated SIP phone rings indicating _two_

Hi All, I have an asterisk box on my DMZ, and I'm using a PF for my firewall, I can make a call but some reasons I have a dead air. Any Ideas? below are my rules... ext_if = "bce0" int_if = "bce1" altitude = "172.16.1.0/24" #### machines #### vbox = "172.16.1.1" uci = "172.16.1.4" voices = "203.172.x.1" ipc =

Hi, Hi All, I've just delved into the world of asterisk and I'm having a few dtmf issues. Internally, amongst sip phones, dtmf is fine. Externally, if you ring from a GSM mobile, DTMF is fine, however if you ring from a standard phone, DTMF fails to register. I am attempting to use a quad port HFC-4S Beronet Card. I've been searching the web most of the last week and

https://bugs.freedesktop.org/show_bug.cgi?id=99954 Bug ID: 99954 Summary: Errors when using VirtualBox with 3D acceleration: gr: ILLEGAL_CLASS ch 6 [007f7f8000 VirtualBox[5063]] subc 0 class c000 mthd 2390 data 00000000 Product: xorg Version: unspecified Hardware: Other OS: All

i am using asterisk 1.6.2 with mISDN and a passive AVM Fritz!card on CentOS 5.5. The only thing, i want to do is a call-redirection from an isdn-call to my mobile via sip-account. My extension conf is: general] static=yes writeprotect=no [globals] OUT_PORT=1 [ISDN] exten => 12345,1,Dial(SIP/012346737222 at sipprovider.local) If i call to the msn 12345, the SIP-call is going out, but after

On Tue, Sep 29, 2015 at 2:54 AM, Julian Zhou <jzhou2oo6@gmail.com> wrote: > Hi I am trying to add a virtualbox domain to my virsh installation, I get: > > error: Failed to define domain from Ondria.xml >> > <https://gist.github.com/jztech101/5aeebb82412c1910dc1f> > https://gist.github.com/jztech101/5aeebb82412c1910dc1f << error: internal > error:

Two VPSs. Identical setups with the exception of the extension. Same version of everything, Asterisk 14.1, Ubuntu 16.10, same firewall rules and so on - box 2 was cloned from box 1. Both VPSs run in the same datacentre. Suddenly, after weeks of OK, I'm getting lots of this on ONE box only: [Nov 4 21:23:04] NOTICE[1468]: res_hep.c:466 hep_queue_cb: Unable to send packet: Address Family

Hello, I have the following setup: 1. MacOS host with VirtualBox installed 2. Ubuntu 16.04 host with libvirt installed What I try to do: Manage VMs executed inside VirtualBox on host 1 with libvirt tools from host 2. I have vboxwebsrv up and running on my MacOS host. I can successfully manage VMs remotely (e.g. with phpvirtualbox). But libvirt (virsh in particular) doesn't work. Reading

I have a new OSX Lion Macbook and would like to control VirtualBox using "virsh" (as I do with KVM under Ubuntu). I've got this far: * Installed VirtualBox * Installed libvirt (brew install libvirt) But now I'm a bit stuck :-) I ran VirtualBox itself, and created a test VM successfully. If I try to use virsh, this is what I get: Brians-MacBook-Air:~ $ virsh -c

> -----Original Message----- > From: CentOS [mailto:centos-bounces at centos.org] On Behalf Of Nicolas > Kovacs > Sent: Thursday, September 14, 2017 3:34 PM > To: centos at centos.org > Subject: Re: [CentOS] Running COS 7.1708 on VirtualBox 5.1.28 > > Le 14/09/2017 ? 21:32, Ken Gramm a ?crit?: > > Anyone else having issues getting the VB drivers to load on 1708? >

https://bugs.freedesktop.org/show_bug.cgi?id=39101 Summary: [NVA8] VirtualBox segfault when accelerating 3D Product: Mesa Version: git Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Drivers/DRI/nouveau AssignedTo: nouveau at