similar to: IPMI serial console

I can't seem to get my serial terminal to work with my new system. I had a serial terminal connected to my old system that worked great and copied /boot.config, /boot/loader.conf and /etc/ttys settings over from it. The new system has a Gigabyte GA970A-UD3 board with just a serial header on the board. I bought a serial connector backplate in an electronics store and connected it to the

Hi, I have built a FreeBSD 7.0RC2 system to use both the serial and video consoles. I find that when I drop into single user mode (shutdown now) on the terminal connected to the box itself I do not see the single user mode prompt on the serial console terminal. Likewise, when I drop to single user mode on the serial console I do not see the single user prompt on the terminal connected to

Due to an issue I'm having with 7.x, and trying to track it down, I spent tonight getting my server setup to allow my to break into the debugger when it hangs, and hopefully dump core ... But, although I *think* I've got it all, I'm obviously missing something, as it isn't breaking ... First ... I'm running a proliant server, and when I connect via SSH to ILO on that

I'm getting the following warning, and then the system locks: ACPI Warning: Incorrect checksum in table [(bunch of spaces)] - 0x29, should be 0x48 Here's a pic: http://db.tt/O6dxONzI System is on a SuperMicro C7X58 motherboard that I just upgraded to BIOS 2.0a, which I would like to stay on if possible. I tried adjusting all the ACPI related BIOS settings without success. Bryce

We have upgraded a box from 6.2 to 6.3-RELEASE. Afterwards the box does not recognize its ST Lab I-160 serial card with Netmos 9845 Chipset. It worked flawlessly on 6.2 with puc(4) driver. >From dmesg: pci1: <simple comms, UART> at device 8.0 (no driver attached) ~# pciconf -l -v | grep -B 4 UART none2@pci1:8:0: class=0x070002 card=0x00041000 chip=0x98459710 rev=0x01 hdr=0x00

Hi, I'm having issues connecting Garmin GPS 18 to COM1 on 9.1, I get nothing but silence. Identical setup works absolutely fine with Linux. I've got PPS wire connected to DCD, but that seems to make no difference on Linux, so I presume it shouldn't affect fbsd either. On Linux, I get: $ uname -a Linux ubuntu 3.8.0-19-generic #29-Ubuntu SMP Wed Apr 17 18:16:28 UTC 2013 x86_64 x86_64

This is a fairly standard and old machine with 2 COM ports. Recently (last Friday) I decided to update my RELENG_7 system and also to transition from sio to uart. This what I had before the upgrade: kernel: sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 kernel: sio0: type 16550A kernel: sio0: [FILTER] kernel: sio1: <16550A-compatible COM port> port

Hi list, I am trying to install FreeBSD 9.1-Release amd64 on a Supermicro server: SuperStorage Server 6027R-E1R12N with Intel Xeon E5-2640 CPU and 32 GB (4 x 8 ) KVR16R11D4/8HC installed Currently I have only 2 SSD Kingston drives (working in mirror) installed on that server. during booting installer from the ISO CD (amd64), the boot process fails with message: Mounting from

Hi all, I have had this problem since day 1 on my new server. It has run since November 15th 2008, and serve approx. 10 GB worth of web traffic per month for the main site and then some 40 domains with mail and small web pages. (hence - it's NOT that busy yet) I started with 7.1-RELEASE-pX since I didn't have problems straight off - but it didn't last long. After a few days of

Hello, I have a problem with loader. I recently upgraded from 6_rel to 7_rel. Now when I install world there is a problem booting. Here is what I do: cd /usr/src make buildworld make buildkernel KERNCONF=BLACK make installkernel KERNCONF=BLACK At this point I can reboot and all is good. After boot I install the new world: cd /usr/src mergemaster -p reboot into single user mode cd /usr/src make

Hello, freebsd-stable. Does somebody use some software RAID5 on FreeBSD in real production system? I want to build storage server for my home: RAW photos, multi-layer PhotoShop files and FLAC-encoded music consume a lot of space, and they should be availible both from desktop & notebook. Also, all photo-content is unique, so I need some insuranse from single HDD crash. I understand,

The current early-printk support for ARM is rather hard-coded, making it hard to add machines or tweak settings. This series slightly moves some code to gather UART settings in xen/arch/arm/Rules.mk instead of the actual .c files. Also it allows two different machines with different settings to share the same driver, which the last patch exploits to add support the Calxeda Midway hardware. This

Hi list, on my previous (lenny or squeeze) machine, I had it up and running, but that machine and configs are gone - and on my new jessie machine (see device and config details below) I cannot start the driver: # /lib/nut/bestups -DDDDD -a Patriot_Pro_II_750 0.000000 debug level is '5' 0.000806 send_to_all: SETINFO device.type "ups" 0.000842 send_to_all:

On 01/28/18 20:15, Fred Smith wrote: > On Sun, Jan 28, 2018 at 12:10:29PM -0500, Pete Geenhuizen wrote: >> I'm upgrading from CentOS6 to CentOS 7. >> >> I run 2 weather stations on C6 and have one of them attached to >> ttyS0 which is on the motherboard, and the other to ttyS2 which in >> on an add-on PCI serial card. >> >> I'm migrating the

hi, It looks that Xen currently only support ISA serial port, which is onboard. Is there any plan to support the PCI serial port? Thanks, Neo -- I would remember that if researchers were not ambitious probably today we haven''t the technology we are using! _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com

These series patch enable Allwinner A31(code name sun6i) support in assemble. with these patches, the cpu 0 of sun6i SOC could successful boot into the c environment. Bamvor Jian Zhang (4): xen/arm: introduce Cortex-A7 support xen/arm: introduce Allwinner sun6i SOC basic support xen/arm: enable early printk for sun6i xen/arm: enable switch to hyper mode for sun6i xen/arch/arm/Rules.mk

Since OMAP UART has a few distinct features than common 8250 UART, I re-implemented its driver rather than porting it based on ns16550.c. There are mainly two big differences between the implementations. First, OMAP UART introduces the concept of register access mode, which divides the register map into seperated space. Switching the access mode is then necessary when configuring it. Second, THRE

Thanks for you reply. I have installed asciidoc with "pkg_add asciidoc" And it returns something: # asciidoc fgh asciidoc: FAILED: input file /root/nut/fgh missing # which asciidoc /usr/local/bin/asciidoc Maybe there is any way to skip building man pages. This is not the such main thing as a new devices support. I also could built the driver that I need # make riello_ser but I don't

I have a current RELENG_7 running on: http://www.supermicro.com/products/system/4U/7045/SYS-7045B-TR+.cfm with the -3+ IPMI card. I can interact with the BIOS, etc, but no joy once we get past the loader. Anyone have ideas? Attached is the kernel config, and the /var/run/dmesg.boot file. -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 512-248-2683

On Wed, 2007-12-05 at 14:22 +0000, Xen staging patchbot-unstable wrote: > # HG changeset patch > # User Keir Fraser > # Date 1196864460 0 > # Node ID f0ac46de680cc6fe8c91699fdda153b125ae515c > # Parent bf21e00155b7dd76653c5340099ecedac7a7de08 > [QEMU-DM] Upgrade emulated UART to 16550A. > > This patch adds 16550 emulation to qemu-dm. I still consider it a work > in