similar to: vid%203b3676be-52e1-11d9-a9e7-0001020eed82

Dear developpers, I have some problem with the latest openssh available via CVS. The target host is detected as mips-sony-bsd, SONY NEWS-OS 4.2.1R, which is an old type OS based on 4.3BSD. At first, this system has VSTATUS defined but no _POSIX_VDISABLE which both are used in openbsd-compat/readpassphrase.c. Second, some header files on this OS do not include <sys/types.h> and it causes

Hi, I tried openssh on my SONY NEWS-OS 4.2.1R which is 4.3BSD based system. I modified a little(*) to compile openssh and the compilation was successful. Ssh worked but sshd didn't work. I checked the output of 'sshd -d'. It says error: open /dev/tty failed - could not set controlling tty: No such device or address when connected from remote host (FreeBSD 5-current) with ssh. And

Dear developpers, I successfully compiled OpenSSH 2.9p1 which I get via CVS with a little modification. Patch is available at http://www.rc.tutrp.tut.ac.jp/~nakaji/install/NEWS/utils/ref/openssh_cvs-news4.diff.gz But one problem remains. In config.h.in, there is a definition about strftime function /* Define if you have the `strftime' function. */ #undef HAVE_STRFTIME but this

Hello, I'm trying samba-2.0.6 on my Sony NEWS-OS 4.2.1aRD which is based on 4.3BSD, having trouble with compilation. Also I have question and want be helped to solve the problem. Yes, I can compile it with dirty hack which is found at ftp://ftp.tutrp.tut.ac.jp/pub/sony-news/samba/samba-news4.diff There are some problems about this old and specific system. 1. It does not have setvbuf(). 2.

The FreeBSD Release Engineering Team is pleased to announce the availability of FreeBSD 7.3-RELEASE. This is the fourth release from the 7-STABLE branch which improves on the functionality of FreeBSD 7.2 and introduces a few new features. There will be one more release from this branch to allow future improvements to be made available in the 7-STABLE branch but at this point most developers are

Hi, According to http://www.openssh.com/portable.html, I tried to update my openssh_cvs tree by CVS. And got an error. $ cvs update -dP cvs [update aborted]: connect to bass.directhit.com(65.214.36.12):2401 failed: Connection refused Why? And from which cvs pserver can I get the latest openssh-portable? Thanks. -- NAKAJI Hiroyuki

Dear developpers, I'm using OpenSSH_2.9p1 with prngd on my Sony NEWS-OS 4.2.1R. NEWS-OS 4.x is based on 4.3BSD and lack of many POSIX and ANSI features. Today I tried to make the latest openssh_cvs and got the following error, gcc -g -O2 -Wall -O -I. -I.. -I. -I./.. -I/usr/local/ssl/include -DHAVE_CONFIG_H -c readpassphrase.c readpassphrase.c: In function `readpassphrase':

Hi, A little change of openbsd-compat/readpassphrase.c is needed for the target mips-sony-bsd, which has VSTATUS defined in termios.h but not have _POSIX_VDISABLE nor VDISABLE in termios.h. -------------- next part -------------- A non-text attachment was scrubbed... Name: openssh-3.0.2p1.diff Type: application/octet-stream Size: 597 bytes Desc: not available Url :

Hi, I''m trying to pass an intel video card to a guest via VT-D. I got this to work once so i know my system can do it, but I can''t seem to replicate my success. Not sure if something changed in the bios(vt-d is still enabled there), or elsewhere. When I pass a device with gfx_passthru=0 (using config below), guest boots up and the vid card shows up at an incorrect pci id(ie not

Hi all, I am looking for someone who help me request NUT to supports power device which has unregistered VID/PID. I will pay you for your service. Detail requirement 1. New VID "0x0483", PID "0xA430" 2. Corresponding driver "usbhid-ups" 3. Manufacture "CyberEnergy" I have no idea to handle this. If need more information, please

On a very few GPUs with the voltage table version 0x50 we have to read out the VIDs out of the entries of the table, where all the other gpus are either PWM based or get a base and a step voltage out of the table header. Currently nouveau tried to autodetect this and actually doesn't parse the entries. This Series adds two things: 1. It parses the entries 2. It decides upon a field in the

Hi! cc'd to freebsd-security@ as somebody there may correct me, cc'd to secteam@ as maintaner of security/portaudit. On Sun, 28 Aug 2005 10:14:21 +0930 Ian Moore wrote: > I've just updated my acroread port to 7.0.1 & was surprised when portaudit > still listed it as a vulnerability. I think it is portaudit problem. > According to

Hello, and thanks for the clarifications. As described, the change does not seem to be too complex on the NUT project's side, the PR posted below took about an hour with some research and this write-up, so I'm not sure I can put a price tag on it :) A donation at https://opencollective.com/networkupstools or https://github.com/sponsors/networkupstools would be welcome though, more so a

Hello Jim, That?s a great help for me. You?re a so kind person ~ Our engineer download the branches f17d9f5 as below and repackage it for test. After testing, The Beta NUT works well with ST VID "0x0483", PID "0xA430. Please tell me how to speed up for merging this to formal version. May I have your predict schedule if possible? Thanks.

http://sudo.ws/sudo/alerts/path_race.html [ODiP] == Dmitry Grigorovich

Dear all; I want to stop RTCP from Asterisk-server to phone. But I want to use RTP. I looked rtp.conf/sip.conf, but I can't know about it. Please tell me how to stop RTCP only. Because , when I access under NAT, my gateway shutdown the port as gateway received RTCP from server. I use Asterisk 1.6.2.6 or 1.4.29 . Also SIP/RTP. thx.

Hi, I have a question about jitterbuffer and PLC. I use Asterisk 1.6.2.0 and 1.6.0.20 or older. I use uLaw. My system map: ============================================================================= [ asterisk 2 ] -- # LOSS # -- # A # -- [ asterisk 1 ] -- # B # -- [ X-lite ] ============================================================================= I use two asterisk server.

Hi experts, Is there any packag for PAV and MPAV algorithms (Pattern Anomaly Value) [[alternative HTML version deleted]]

Dear all, Sorry to bother you, but I didn't find the solution in the R-help archive. I would like to change the thickness of stripes inside the barplot. Is there any solution to do that when using the barplot() fuction and the density option ? Or is there any other function ? Thanks very much for your help. Best regards. Gael. Gael Millot UMR 7147 et Universite Pierre et Marie Curie

Full_Name: Gael Millot Version: 2.2.0. OS: XP Submission from: (NULL) (195.220.102.20) Hello. I sent an Email in r-help without answer for the moment. I am wondering if it could have a mistake in the code of the ansari.test function. For me, it seems that the function do not recover the p value at the correct side of the normal law N(0, 1) when it use the normal approximation (presence of