similar to: motherboard for cents 6.3

Hello, I am building a home file server and am looking for an ATX mother board that will be supported well with OpenSolaris (onboard SATA controller, network, graphics if any, audio, etc). I decided to go for Intel based boards (socket LGA 775) since it seems like power management is better supported with Intel processors and power efficiency is an important factor. After reading several

I need a recommendation on a good motherboard/processor combination. I would like a motherboard that has lots of PCI slots and works well with Asterisk without problems getting drivers working, etc. Onboard LAN would be nice to keep from using a slot. Plan to use RedHat 8 for the OS. Please provide your input as soon as possible. I need to build a demo box with 2 ports FXO and use the new

Greetings- I'm attempting to get CentOS 5.5 x86 (yes, very specific version required for specific software usage scenario... don't ask) running on an Intel D425KT mini-ITX motherboard. Everything works fine, with the exception of the onboard ethernet, which is a Realtek RTL8105E chip. The stock CentOS installation attempts to use the r8169 driver, which does not work. I've been around

Dear mailinglist, I own a Gigabyte motherboard GA 970A UD3 with IOMMU support. Since the update XSA-36 (also part of the latest debian wheezy pkg), the IO-Virtualisation does not work any more as discussed on this mailinglist [0] and [1]. I like to ask, if there is an "official" solution in sight. I''m not sure about my alternatives. How "dangerous" is the

To all.. I was using a Gigabyte motherboard, and the board seems like a bad choice. What do you guys recommend for a decent server board that would use a Dual Core processor and DDR2 ram. I dont want to replace the CPU and Mem i already have, just find a decent board that supportsthe existing.. Thanks, Ryan Nichols -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, i have a question. I''m going to setup a Xen server for a client. It''s going to serve about 25 clients. It''s a Athlon 64 3200+, which currently runs Debian i386-stable and xen 2.0.7 until Xen 3.0 is stable enough, and then i''m gonna replace it with Debian amd64-stable and Xen 3.0. The Xen dom''s consists of: Samba , file printer sharing most

I''m a fan of ZFS since I''ve read about it last year. Now I''m on the way to build a home fileserver and I''m thinking to go with Opensolaris and eventually ZFS!! Apart from the other components, the main problem is to choose the motherboard. The offer is incredibly high and I''m lost. Minimum requisites should be: - working well with Open Solaris ;-) -

I have an Asus P5Q-WS running FreeBSD 7 and the onboard Realtek NIC's are not being detected. No Kernel modifications as this is a fresh install. pciconf -lv : re0@pci0:3:0:0: class=0x020000 card=0x82c61043 chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' class = network

Hello everyone: Over the past few years I have been a happy samba user, running samba on Redhat / FC platforms. Recently I upgraded hardware, and Samba hasn't been performing well at all.. which makes me sad :-( The new hardware is Asus P5B board with a dual-core intel processor. This board has an onboard Realtek RTL8111/8168B gigabit ethernet controller, which was a hassle to setup.

????????????. ????? ??? ????????? ???????? ?? ????. ?? ??????? ?????????? ? ????????? ?? ????? ??????????? ?????? ????? ??? ???????? Gigabyte GA-P35-S3, ??????? ????? ?????????? ??????? ???????? Realtek RTL8111B/8111C. ??? ???????? ?? ????? ?????????? ?????????? ??????????? ????, ?? ????? ?????? ?????? ?????? ?????????? ?????? ?????????. ?

I'm running 7.0-RELEASE-i386 on Jetway's NC92-N230 mainboard. The board has one integrated RTL8168/8111 gigabit NIC as well as an expansion board with three RTL8168/8111 NICs. Why would the three NICs work while the onboard NIC does not? none2@pci0:1:0:0: class=0x020000 card=0x816810ec chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device

Hello all..... I would like to know if anyone here has had good experience with this Supermicro motherboard.....http://supermicro.com/products/motherboard/P4/E7221/P8SCT.cfm I am thinking about using it in an entry level mail and file server with a 3ware card and 200 GB SATA drives. Cost is a factor here otherwise I would go for an Opteron board instead. JC

Has anyone stumbled across an Intel brand motherboard which both works with the 8000 series of CPUs and with CentOS 4/5 out of the box? (by works I mean the NIC/Disk controllers without "fudgery") The DG31 board "kind of" works but unfortunately it has 2 DIMM slots, the realtek NIC isn't supported (don't know why, its just a standard realtek NIC, although it might be

What is happening in centos 5 with network config files??? I have a machine with 2 network cards. ifcfg-eth1 keeps changing to DHCP. All my static setup is gone. Why is it doing this? How can I stop it? I run "netconfig -d eth1" and re-setup my static information. I reboot and now I am back to DHCP. I have a gigabyte motherboard, nvidia chipset. forcedeth driver. eth0 is e1000.

Does anyone know if support for the Intel 875P/ICH5 motherboard chipset has yet made it into the stable branch? (Is release 4.9 likely to have it?) I am mainly interested in the IDE and "native" serial ATA devices. There is also a new Intel ethernet controller chip, 82547EI, that is designed to interface directly with the 875P chip. The currently supported chip list only goes up to

Hello list I have a shutdown problem. I have a machine with gigabyte GA-G33M-DS2R motherboard. Integrated network card is Realtek 8111B. I can not wake the computer after I shutdown it from FreeBSD. It is a dualboot system - windows xp and freebsd. If I shutdown the computer from windows - later I can wake it up with magic packet. Even if i shutdown the machine on the boot menu with the power

What socket AM2 motherboards out there work well with xen (i.e. support > 4G ram, sata and lan chipsets work). I''m looking to probably run one of the lowpower Athlon 64 X2 4200''s in it. I''d also like to see atleast 4 ram slots. Anyone have any recomendations? Thanks, Doug _______________________________________________ Xen-users mailing list

Hello, I need some advice how to debug this issue ... Recently I got a new mainboard for a router, it's a Gigabyte GA-H77N-WIFI with two onboard re(4) NICs. The problem is that re0 works fine and re1 doesn't: It doesn't receive any packets. Tcpdump displays all outgoing packets, but no incoming ones on re1. Ifconfig shows the link correctly (100 or 1000 Mbit, depending on where I

I found (and fixed) a problem with my realtek onboard 8139 controller. dhcpd server sends filename "pxelinux.0" but realtek requests "pxelinux.0\377" (i.e. the octal character 377 is appended), resulting in a file not found during the tftpd phase. I fixed this by adding a mapping to tftpd: # strip ending garbage from filenames (Realtek PXE bug) r ^([[:graph:]]*)(.+)$ \1

Hi! I''ve got a motherboard (Gigabyte GA-G33-DS3R) where the Ethernet port has been broken. I''ll buy a new motherboard, but wants to keep all my other equipment (CPU, Memory, TV-cards etc). The requirements/wishes on the new motherboard are 2 Ethernet ports and 2 PCI slots. It would also be good if it would support VT-d. I''ve found two boards that would fulfill my