similar to: Processed: serious bug with networking

Processing commands for control at bugs.debian.org: > severity 695221 important Bug #695221 [xcp-xapi] xcp-xapi: xe pif-reconfigure-ip doesn't work with non 255.255.255.0 subnet netmask Severity set to 'important' from 'serious' > End of message, stopping processing here. Please contact me if you need assistance. -- 695221:

Package: xcp-xapi Version: 1.3.2-13 Severity: critical I get this bug when installing XCP and configuring the network portion of it. When I issue the following command: xe pif-reconfigure-ip uuid=$PIF_UUID mode=static IP=10.0.0.10 netmask=255.255.255.240 gateway=10.0.0.1 DNS=10.5.1.2,10.5.1.3 My network interface looks like this (Broken): eth2 Link encap:Ethernet HWaddr 00:50:ec:24:c7:43

Package: xcp-xapi Version: 1.3.2-6 Severity: minor Tags: upstream If xe pif-configure-ip called twice with different IP, it did not remove old IP from interface (but didn't store both addresses in database). (Checked for management interface) Steps to reproduce: xe pif-reconfigure-ip uuid=... ip=IP1 .... xe pif-reconfigure-ip uuid=(same) ip=IP2 ... 'ip addr show' shows both

Hi, After reading XenServer documents and debugging, I found the previous configuration is correct, here is the one I've configured to work: In XCP, as in XenServer, system's network configuration doesn't really matter, it only make sense before XCP starts and handles the network settings. So there is no need to configure VLAN on host machine, and you only need a minimal one active

control: severity +2 serious I would call this an RC bug (serious), but not critical It would be critical if the user lost data from some unrelated application, etc It is serious because a) it makes the package and the whole system unusable for all but one very specific network configuration (users with a /24) b) using good old `xm' style Xen I never experienced any issue like this,

Package: xcp-xapi Version: 1.3.2-9 Severity: normal Function wait_for_xapi in /etc/init.d/xcp-xapi does not work as intented. Symptoms: (on slave) /etc/init.d/xcp-xapi restart [....] Restarting The XenAPI server: xapiThe host toolstack is still initialising. Please wait. Cause: Line 'xe pif-scan host-uuid=${INSTALLATION_UUID}' called before xapi is fully synced with master.

Package: xcp-xapi Version: 1.3.2-6 Severity: normal After some time of rebooting and toolstack restart found very funny output in 'xe pif-lis': xe pif-list params=currently-attached,device device ( RO) : vif2.0 currently-attached ( RO): false device ( RO) : vif211.0 currently-attached ( RO): false device ( RO) : eth1

Package: xcp-xapi Version: 1.3.2-9 Severity: normal Hi guys, Just a couple of things I noticed running through /usr/share/doc/xcp-xapi/README.Debian.gz as referenced by http://wiki.debian.org/XCP In "4/ Configuring Xen and XCP": sed -i "s/TOOLSTACK=/TOOLSTACK=xapi/" /etc/default/xen should be sed -i "s/TOOLSTACK=.*/TOOLSTACK=xapi/" /etc/default/xen Otherwise

Package: xcp-xapi Version: 1.3.2-8 Severity: important Tags: patch Found race condition (specific only to slave hosts): xcp-xapi can start earlier than xcp-networkd due lack of dependency in init.d script. Syptoms: After reboot slave's xcp does not work: xe (anything): The host failed to acquire an IP address on its management interface and therefore cannot contact the master. log:

Package: src:xen-api Version: 1.3.2-9 Severity: wishlist Hi, In /usr/share/doc/xcp-xapi/README.Debian.gz, line 149: 149 PIF_UUID=`xe pif-list device=eth0` 150 xe pif-reconfigure-ip uuid=$PIF_UUID mode=static \ 151 IP=1.2.3.4 netmask=255.255.255.0 gateway=1.2.3.1 The command for acquiring the pif-uuid is missing a --minimal parameter, which makes it output the UUID only. -- Regards,

Package: xcp-xapi Version: 1.3.2-8 Severity: important During startup /etc/init.d/xendomains script is called. That script is installed with xen-utils-common witch xcp-xapi is depends on. That script calls /usr/sbin/xen as xen list &> /dev/null This 'xen' seems to call xapi: xen list ^Z [1]+ Stopped xen list root at lab-xh3:~# ps f PID TTY STAT TIME

Processing commands for control at bugs.debian.org: > severity 675052 normal Bug #675052 [xcp-xapi] xcp-xapi: xe vm-memory-target-set does not write target to xenstore Severity set to 'normal' from 'important' > severity 678923 normal Bug #678923 [xcp-xapi] xcp-xapi: host-disable and host-reboot make host disable forever Severity set to 'normal' from

Hello, I have been playing with the XCP for a while now, and must say I''m very exited about the technology. I had no prior experience with Xen so it has taken me a while to understand the concepts, but now I feel most important issues are solved and I''ve purchased some hardware to build my (tiny) cloud on. The box is a Supermicro 1026TT-IBXF, so I have 2 x Ethernet and 1 x

It appears that this issue may be a result of documentation problems When I was having this problem, I had xenbr0 declared in my /etc/network/interfaces file. I have now stripped out everything in the interfaces file except the loopback interface, rebooted, and now my xcp+openvswitch system appears to be adding domUs to the bridge automatically, so the problem is no longer there. Specifically,

Package: xcp-squeezed Version: 1.3.2-9 Severity: important When trying to start a guest I get: # xe vm-start name-label=squeeze-2 The server failed to handle your request, due to an internal error. The given message may give details useful for debugging the problem. message: Failure("The ballooning daemon is not running") If I then manually run "/etc/init.d/xcp-squeezed

Processing commands for control at bugs.debian.org: > reopen 678923 Bug #678923 {Done: George Shuklin <george.shuklin at gmail.com>} [xcp-xapi] xcp-xapi: host-disable and host-reboot make host disable forever Bug reopened Ignoring request to alter fixed versions of bug #678923 to the same values previously set > End of message, stopping processing here. Please contact me if you need

Package: xcp-xapi Version: 1.3.2-6 Severity: normal Tags: upstream /usr/lib/xcp/bin/xe-edit-bootloader failing with following message: /usr/lib/xcp/bin/xe-edit-bootloader -u 19f66083-e776-70d1-1808-3712688ad138 Creating dom0 VBD: 0fdb952e-92ff-4b53-dd49-8d54b2268787 Plugging VBD: Waiting for /dev/sm/backend/4c15ea03-5d70-938e-8265-d5424c0fda5e/963afb9a-9ceb-410f-8554-8be9fb70e7e0: . done

Package: xcp-xapi Version: 1.3.2-6 Severity: normal Tags: upstream vbd plug to PV domain cause following error: The server failed to handle your request, due to an internal error. The given message may give details useful for debugging the problem. message: the device disappeared from xenstore (frontend (domid=4 | kind=vbd | devid=51760); backend (domid=0 | kind=vbd | devid=51760)) (same error

Package: xcp-xapi Version: 1.3.2-6 Severity: minor Tags: upstream Builin utility for lowlevel vm boot repairment xe-edit-bootloader contains wrong path to xe. IS: XE="/usr/lib/xcp/bin/xe" MUST BE: XE="/usr/bin/xe" -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux

Package: xcp-xapi Version: 1.3-16 Severity: normal Tags: patch Dear Maintainer, Path to "xe" program in /usr/lib/xcp/bin/xe-mount-iso-sr should be: XE="/usr/bin/xe" HTH, David -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-2-amd64 (SMP w/8 CPU cores)