similar to: Corrupted raid-z pool

Hi, I was trying to rebuild world on a FreeBSD 10 test system, that I had just installed. ZFS root was setup. I let the installation program do all the ZFS setup and configuration. I put root on a 5 disk encrypted raidz array. Besides the installer configuring 5 times the amount of swap space I asked for (asked for 8gb, installer put 8gb on each drive, for 40gb in total.) everything was working

I have a GPT formatted disk where I recently expanded the size of a partition. I used "gpart resize -i 6 ada1" first to expand the partition to use the remaining free space and then growfs to modify the FFS file system to use the full partition. This was all done in single-user mode, of course, but when I enter "exit" to bring the system up, it failed to mount /usr. This was

Hi Guys, Has somebody encountered (significantly) different read/write speeds when using gmirror? I have 2xWD WD30EFRX RED drives which are configured as follows: $ gmirror status Name Status Components mirror/root COMPLETE ada0p2 (ACTIVE) ada1p2 (ACTIVE) mirror/data COMPLETE ada0p4 (ACTIVE) ada1p4 (ACTIVE) mirror/root is mounted

Seem to have come to a dead end trying to configure a cups printer on a samba server. Been reading and googling till my eyes are about ready to google themselves. Anyway, it would be fantastic if one of you might have seen something I've missed. Setup: linux server running samba3. Also on the lan are a win95, winXP and linux box. smb.conf: [global] workgroup = HOME server string =

Hi, One of my colleagues was confused by the output of ''zpool status'' on a pool where a hot spare is being resilvered in after a drive failure: $ zpool status data pool: data state: DEGRADED status: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state. action: Wait for the resilver to complete. scrub:

Overnight I was running a zfs send | zfs receive (both within the same system / zpool). The system ran out of space, a drive went off line, and the system is degraded. This is a raidz2 array running on FreeBSD 8.1-STABLE #0: Sat Sep 18 23:43:48 EDT 2010. The following logs are also available at http://www.langille.org/tmp/zfs-space.txt <- no line wrapping This is what was running: #

Hi all, I recently experienced a disk failure on my home server and observed checksum errors while resilvering the pool and on the first scrub after the resilver had completed. Now everything seems fine but I''m posting this to get help with calming my nerves and detect any possible future faults. Lets start with some specs. OSOL 2009.06 Intel SASUC8i (w LSI 1.30IT FW) Gigabyte

Just look at this. I thought all the restarting resilver bugs were fixed, but it looks like something odd is still happening at the start: Status immediately after starting resilver: # zpool status pool: rc-pool state: DEGRADED status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine

Hi, I am using FreeBSD 8.2 and went to add 4 new disks today to expand my offsite storage. All was working fine for about 20min and then the new drive cage started to fail. Silly me for assuming new hardware would be fine :( The new drive cage started to fail, it hung the server and the box rebooted. After it rebooted, the entire pool is gone and in the state below. I had only written a few

Hi! We have a raidz2 pool with 1 spare. Recently, one of the drives generated a lot of checksum errors, so it was automatically replaced with the spare. Since the errors stopped at some point, we figured that the drive itself was not at fault. We offlined it, zeroed it and onlined it again, started resilvering, and manually detached the spare drive. The zpool status is ONLINE and mentions

Hi, I don''t have means to replicate this issue nor file a bug about it so I''d like your opinion about these issues or perhaps make bug report if necessary. In scenario where is say three raidz2 groups consisting several disks, two disks fail in different raidz-groups. You have degraded pool and two degraded raidz2 groups. Now, one replaces first disk and starts resilvering, it

After several days of trying to get a 1.5TB drive to resilver and it continually restarting, I eliminated all of the snapshot-taking facilities which were enabled and 2009-10-29.14:58:41 [internal pool scrub done txg:567780] complete=0 2009-10-29.14:58:41 [internal pool scrub txg:567780] func=1 mintxg=3 maxtxg=567354 2009-10-29.16:52:53 [internal pool scrub done txg:567999] complete=0

I have a large (88-drive) zpool in which a drive was recently replaced. (The pool has a bunch of duff Toshiba MK2001TRKB drives -- never ever pay money for these! -- and I'm trying to replace them one by one before they fail completely.) The resilver on the first drive replacement has been taking much much too long, and currently it's stuck in this state: pool: export state: DEGRADED

Hi, I have Dell md1200 connected to two heads ( Dell R710 ). The heads have Perc H800 card and drives are configured in Raid0 ( Virtual Disk) in the RAID controller. One of the drives had crashed and is replaced by a spare. Resilvering was triggered but fails to complete due to drives going offline. I have to reboot the head ( R710) and drives comes online. This happened repeatedly when

Hi all, I am running S11 on a Dell PE650. It has 5 zpools attached that are made out of 240 drives, connected via fibre. On thursday all of the sudden two out of three zpools on one FC channel showed numerous errors and one of them showed this: root at solaris11a:~# zpool status vsmPool01 pool: vsmPool01 state: SUSPENDED status: One or more devices is currently being resilvered. The pool

Yesterday morning I awoke to alerts from my SAN that one of my OS disks was faulty, FMA said it was in hardware failure. By the time I got to work (1.5 hours after the email) ALL of my pools were in a degraded state, and "tank" my primary pool had kicked in two hot spares because it was so discombobulated. ------------------- EMAIL ------------------- List of faulty resources:

Hi, folks, testing zfs. I'd created a zpoolz2, ran a large backup onto it. Then I pulled one drive (11-drive, one hot spare pool), and it resilvered with the hot spare. zpool status -x shows me state: DEGRADED status: One or more devices could not be used because the label is missing or invalid. Sufficient replicas exist for the pool to continue functioning in a degraded state.

Hi list, Here''s my case : pool: mypool state: DEGRADED status: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state. action: Wait for the resilver to complete. scrub: resilver in progress for 147h19m, 100.00% done, 0h0m to go config: NAME STATE READ WRITE CKSUM filerbackup13

Greetings! I''ve got a FreeBSD-based (FreeNAS) appliance running as an HVM DomU. Dom0 is Debian Squeeze on an AMD990 chipset system with IOMMU enabled. The DomU sees six physical drives: one of them is a USB stick that I''ve passed through in its entirety as a block device. The other five are SATA drives attached to a controller that I''ve handed to the DomU with PCI

mark wrote: > Hi, folks, > > > testing zfs. I'd created a zpoolz2, ran a large backup onto it. Then I > pulled one drive (11-drive, one hot spare pool), and it resilvered with > the hot spare. zpool status -x shows me state: DEGRADED > status: One or more devices could not be used because the label is missing > or invalid. Sufficient replicas exist for the pool to