similar to: the at command

Bugs item #28801, was opened at 2010-12-25 11:02 You can respond by visiting: http://rubyforge.org/tracker/?func=detail&atid=411&aid=28801&group_id=85 Category: win32-process Group: Code Status: Open Resolution: None Priority: 3 Submitted By: Rafa? Michalski (royaltm) Assigned to: Nobody (None) Summary: unclosed handle in Process.setpriority/getpriority Initial Comment: Using

Hi, I have a problem dialing a SIP phone which is logged in as different Astesrik machine from the one I am working with. I want to call a phone in Another astersik machine in , if it answers, calling a SiP phone registered in my ASterisk: My dialplan is: [mariaSIP] exten => _1.,1,Wait(1) exten => _1.,2,Dial(SIP/6021@192.168.0.51:5038,20) exten => _1.,3,HangUp() exten =>

Salut Alex. Peut tu me conseiller pour que je puisse renomer le processus et changer la priorité de mon application. merci. sebastien http://beusse.liveror.com/ _______________________________________________ wxruby-users mailing list wxruby-users@rubyforge.org http://rubyforge.org/mailman/listinfo/wxruby-users

Hi, is it possible to Restore files deleted with " rm rf " from ext4 or ext3 filesystem by mistake. Regards Ahmad

I'm curious why any user logged in at the console can issue the 'reboot' command and reboot the system.? I've tested/verified this to work, and read some older posts about this.? If it were a bug, I suspect it would be fixed by now. Also, if a user is logged into the console, and then logs in via ssh from another system, that user can also reboot the system from that ssh

On Thu, Aug 6, 2015 at 11:56 AM, Murthy Gandikota <murthy64 at hotmail.com> wrote: > Tested with X-Lite and it worked fiine. Is there some way to replace > "Anonymous" with a config parameter? > > Thanks for your kind help > > ---------------------------------------- > > From: murthy64 at hotmail.com > > To: asterisk-users at lists.digium.com >

I have a simple requirement/test I'm trying to perform, but having difficulty. I have a system with 2 interfaces, BoxA: eth0? 172.26.50.102 eth1? 192.101.77.62 My goal is to have a tcp port built on BoxA such that hosts on the 192.101.77.0/24 network can reach a port on a different box on the 172.26.0.0/16 network. The target system is 172.26.10.120?? tcp/22 The port I wish to build is

A while back, I sent in a patch that added Digital Unix SIA authentication to OpenSSH. Well, I just figured out that it didn't handle everything correctly (locked accounts could still log in). I thought I had checked that, but I guess I missed it. Anyway, here is a patch against OpenSSH 2.2.0p1 that fixes this. -- Chris Adams <cmadams at hiwaay.net> Systems and Network Administrator

I have a requirement to allow our security officer to regularly view and analyze the logging and auditing results of one of the machines in our lab. He comes from the Microsoft Windows world and is not a *nix trained person. I know I can configure logwatch. I can also create a script containing various 'aureport' runs into a cron job. Any recommendations for a GUI-based tool that would

Hello! Sorry if this question is already asked, but I not finding answer for it... I have server with CentOS 6.4, later it will be router for home network. When I tried tune iptables I have error: [root at gateway sysconfig]# iptables -t NAT -A POSTROUTING -o eth0 -j MASQUERADE iptables v1.4.7: can't initialize iptables table `NAT': Table does not exist (do you need to insmod?)

Sorry for the messed up replies. ?The web based icloud interface forces the writer to reply at the top of the email and if you try to write at the bottom by deleting a few lines of the message or selecting the whole message, deleting it, adding some spaces and then pasting back and go to the end it and adding a reply, it kills the indentation. -wes

It keeps butting in when I try to install map software from Garmin under Wine. I'm not nearly competent not willing to apply the remedy it suggests. How do I get to someplace where I can disable it, or at least set it to permissive?

On Thu, Aug 6, 2015 at 12:33 PM, Murthy Gandikota <murthy64 at hotmail.com> wrote: > > > ________________________________ > > Date: Thu, 6 Aug 2015 12:07:35 -0500 > > From: rmudgett at digium.com > > To: asterisk-users at lists.digium.com > > Subject: Re: [asterisk-users] Asterisk uses "Anonymous", but why? > <snip> > >> Here

Hi... Tinc v1.0.13 works fine on Windows XP but Tinc v1.0.14 shows only an error message (tinc -n xxx -d5 -D). The error message is "System command 'setpriority' failed. Command not found"... Any suggestions ? Kind regards, Michael

Hi, Just joinedthe mailing list. I am new to Centos, anybody got any tips. Derek

I've used ipmitool any number of times, but never for more than getting info, or setting the server name on a Dell LCD screen. However, I had a server screaming about intruder alert, intruder alert, er, "Chassis intrusion detected", and I thought there might be a way to shut it up (this after pulling the server and reseating the lid). A quick google found, on the first page, an 8

Hello, I'm currently developing a simple asterisk application using SFS (Skype For SIP) which tries to call to an outbound number, play a message and read DMTF digits. My first approach used the Manager to originate calls and then called an agi script to deal with the rest. Anyway, this ended up being not so clear because the call did not start on the Originate extension that it was supposed

Hi; I tried this: [root at mydomain ccc]# telnet 127.0.0.1 25 Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. EHLO MAIL FROM: me at gmail.com RCPT TO: me at gmail.com DATA testing from server . ^] but I never get back to a command prompt. Please advise. TIA, John

What do we loose by not having post-auth privsep? What code is executed between authorization and actual setting of the effective uid? On Tue, 3 Sep 2002, Chris Adams wrote: > Once upon a time, Toni L. Harbaugh-Blackford <harbaugh at nciaxp.ncifcrf.gov> said: > > It appears that the integration of the sia session setup will either > > have to be rethought or abandoned

I'm running a piece of network backup software called 'bacula', on a minimal CentOS 6.4 install. I got everything working pretty well, but there's one piece giving me some problem-- a component which gives status info via a GUI. In the past, on previous installations, I could ssh to the bacula server with the -X option, and run the application (called 'bat'), and it would