Displaying 20 results from an estimated 90 matches similar to: "I'm trying to parse 1 column of a dataframe into 3 seperate columns"
2005 Mar 17
1
ocfs seek-performance
hi list,
i have a little problem with 2-node RAC using OCFS. the application running on this cluster does
heavily index-based accesses. the data volumes are SAN volumes connected by fibrechannel.
the throughput does not exceed 10mb/s, average is 7-8 mb/s. i've used 'iostat -x' and got rkB/s=8000
while %util=100% (device was saturated) from kernel's POV.
i did some
2006 Feb 08
1
Bandwidth: to seperate or not to seperate
Hi everyone,
RE: Bandwidth. We have an asterisk server sharing bandwidth with other
[web] servers in cabinets that we rent in a large data-center and all is
working fine. But I'm concerned that web traffic could affect the VoIP
quality (my tests so far haven't showed this [yet!]. Currently I'm
running a server with Netfilter (iptables) between all the servers and
the Internet
2006 Jul 13
0
error_messages_for and seperate controllers
I''ve got two controllers, let''s call one Post and the other Comment
for simplicity, i.e.:
class Post < ApplicationController
def show
...
end
end
class Comment < ApplicationController
def create
@comment ...
end
end
In my create() method I would like to redirect back to the show method
after I have saved the comment. But If I have errors in saving the
2011 Apr 28
1
rsync-3.0.8: problem with installing man pages when using seperate build dir
Hi all,
there is a little problem when building rsync outside it's source dir with
installing the man pages: they are not found and therefor not installed. The
attached patch fixes this situation.
Kind regards,
H.-A. Arnolds
--
________________________________________________________________________
Dipl.-Ing. Heinz-Ado Arnolds
MPI fuer Astrophysik
Karl-Schwarzschild-Strasse 1
2005 Sep 24
0
Seperate siptrunks
Hi all. Is it possible to get * to send calls to different sip trunks
depending on what codec the incoming call use? This to avoid transcoding
Anders
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050924/0e209878/attachment.htm
2005 Dec 04
0
[PATCH] Seperate VMX domainname argument to 2 parts to enable qemu-dm
Image.py should send 2 new arguments to qemu-dm for setting QEMU window
Title. 1 is const string "-domain-name", the other is the string of
domain name. At present imagy.py combines these two strings to 1. So
Qemu will fail to recognize it and fail to start.
Signed-off-by: Yongkang You <yongkang.you@intel.com>
--- a/tools/python/xen/xend/image.py 2005-12-04 14:32:04.956602836
2012 Sep 21
0
[LLVMdev] Seperate stack location for outgoing parameters and local variables for custom target?
I'm working on a target for the intermediate language of another compiler
(so it can benifit from LLVM's optimization stages). I'm working on LLVM
3.1 for now. I started the translater as a copy of the MIPS target so that
I can just modify it to produce the correct output.
I basically want to replace all of the local variables and incoming
parameters with values that look like this:
2011 Oct 31
0
Slow Game movies in seperate X server
I've searched for an answer on this one, but couldn't find a topic on this.
Today I read something about running games in a seperate x-server.
This could have benefits for some games so I was told.
I already managed to get the seperate x-server to start, and for wine to run a executable in there.
Now here comes my problem, which is that playback of game video's (cutscenes etc.) is very
2004 Jun 09
1
Seperate asterisk VM system possibility
I would like to move voicemail to a dedicated server but I can't figure
out how to make the MWI work if the ATA doesn't register to the
voicemail server. The main reason for this is redundancy. I have two
SIP registrars running and in the case of a failure from the primary,
both the gateways and the ATAs switch over to the secondary, but since
the voicemail is on the primary, it also
2006 Mar 13
1
Seperate music on hold for SIP extensions
I have a requirement to play different hold messages depending upon the extension that originated the call. I noticed a musicclass setting in sip.conf, but it appears this is global. I tried setting this on all of my individual extensions, but it didn't have any affect. Is there a way to achieve this, either through sip.conf or in the dial plan?
Thanks,
James
2006 Mar 31
1
incoming triggers seperate outbound
Hey,
I would like in the course of dial plan logic, to trigger a separate
outbound call. If that outbound call is answered, and if that certain
key response is detected then it will bridge the incoming call to the
newly dialed outbound call.
What I want to accomplish is that when a caller dials in, they can enter
enter an extension that will call out to a callee's cell phone. When
the
2007 Dec 06
0
Can Asterix seperate the signalling and the media ip's with Quintum
New to Asterix and perhaps someone can help.
The plnned configuration is that the Quintums are to register to the Asterix
and the signalling to be handled by the Asterix but the media (G 729 code)
to be directed to the service provider.
Thanks Shaun
2016 Apr 18
0
[PATCH v4 30/37] clk: seperate the locking from the implementation in nvkm_clk_update
Signed-off-by: Karol Herbst <nouveau at karolherbst.de>
---
drm/nouveau/nvkm/subdev/clk/base.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drm/nouveau/nvkm/subdev/clk/base.c b/drm/nouveau/nvkm/subdev/clk/base.c
index 7f86e41..d6f239f 100644
--- a/drm/nouveau/nvkm/subdev/clk/base.c
+++ b/drm/nouveau/nvkm/subdev/clk/base.c
@@ -319,14 +319,11 @@
2009 Mar 03
1
Seperate auth per protocol (pop3/imap)
Hi,
During discussions with the boss we've speculated about having users
having only specific services available. One of the ideas was to have
users being able to specify if they wanted POP3 or IMAP and whether we
could limit their access to one or the other server side.
We use MySQL for the userdb and passdb lookups at the moment. Is it
possible to specify separate auth files with different
2011 Sep 24
0
"doveadm log reopen" don't reopen seperate lmtp log
Dear all
I have setup separate pop3/imap log "/var/log/dovecot" and lmtp delivery
log "/var/log/dovecot-deliver".
After rotating logfiles, i run "doveadm log reopen". I see that my
pop3/imap log "/var/log/dovecot" is used straight away, but my lmpt log
"/var/log/dovecot-deliver" isn't used at first. After some time, usually
a few minutes,
2003 Sep 25
0
split network into seperate networks
I've got a pretty large lan at the moment and we are moving into a new
office building next week.
I'm looking at splitting the lan into seperate networks. At this stage I
have one samba DC that does netlogon, roaming profiles etc for all clients.
I'm not using LDAP with samba and won't be able to too soon as the change
would be major. I have a ldap server used for qmail /
2004 Mar 12
1
[profiles] server seperate from PDC ?
Hi!
Due to performance problems (old donated hardware) I would like
to move [profiles] service from our Samba 2.2.8a PDC to a seperate
samba server.
1) Is this at all possible and
1b) how do I make this profile server know all necessary user
data and file permissions? - Does it simply have to become
a domain member server? Or do I have to transfer the UNIX
accounts, too?
2006 Feb 01
1
How to create seperate .rpm's for RedHat
How do I recreate the individual .rpm's that RedHat seems to like? I can
compile samba using the ../packages/RedHat/makerpms.sh script but that
only generates a single .rpm file. I have to "force" install it since I
can not remove the multiple RedHat generated .rpms since they are so
entwined with other dependancies. Each time a new version of samba is
released, I'd like to
2011 Feb 02
2
Seperate BIND server for Samba 4
Hello!
I've set up samba 4 with great success since alpha12, but i've always used a
locally installed version of BIND.
Is it possible to use a seperate BIND server instead? I'd like to not run BIND
on my file server.
I have not seen any instructions to this effect, so perhaps someone would please
point me in the
correct direction?
Thank You Very Much!!
++AMARU
2004 Mar 10
1
Seperate Log Files Per "Account"
Good day all. I was wondering if the "log file = /path/to/logfile" could
be used per module as opposed to being a global parameter. My goal is to
have each individual module log to a different file in order to keep
customer's transactions seperate. I have tried in the global parameter
section "log file = /var/log/rsync/$LOGNAME/rysnc.log" to no avail.
Perhaps I should