similar to: [PATCH] in.tftpd: Allow chdir w/o root, improve I/O

# HG changeset patch # User Roger Pau Monne <roger.pau@entel.upc.edu> # Date 1318335991 -7200 # Node ID 2fb4bf8c16cd35ddc0bf7ddc7ff8fda4b9678211 # Parent 64f17c7e6c33e5f1c22711ae9cbdcbe191c20062 libxl: reimplement buffer for bootloading and drop data if buffer is full. Implement a buffer for the bootloading process that appends data to the end until it''s full. Drop output from

I'm am currently setting up a simple backup system using rsync. I am backing up users home directories to a central backup machine, and then exporting those backups via NFS back to their host machines. I had this set up and working under Linux (kernel 2.4.21) but have since decided to give Mac OS X a try, and moved the system over to a brand new Xserve G5. It was actually quite painless to

On Sun, Jan 29, 2017 at 12:09:43PM +0100, Uwe Kleine-K?nig wrote: > AI_CANONNAME is only relevant when the resulting official name is used, > which is not the case in tftpd for the address to bind to. Also > AI_ADDRCONFIG isn't helpful. This flag is good for sockets used to > connect(2) somewhere. But for listening sockets it makes tftpd fail to > start when -a 0.0.0.0:69 is

Hi, I'm setting up xen (on centos 5.3) and I'm facing a weird performance issue with iSCSI. I attach the iSCSI targets to dom0 and if I use them from dom0 I obtain good performance with simple dd tests (~100MB/s both reading and writing). I then use the block devices for the domU and if I repeat the same dd test from within the domU the write performace is still good (~100MB/s), but the

Hello, I need help in setting up tftpd-hpa to send a kernel to a client, on a debian woody installation. I did manage the feat when using tftpd to send a kernel to a client which had a separate network interface card, but I would like to do it with integrated LAN. Trials with tftpd failed with error messages starting with 'PXE', and later I learned that tftpd-hpa is needed for the PXE

This is more a question than a serious proposal. The name of the pid file should probably be configurable, and it should be unlinked on normal termination, but no such thing exists in standalone mode. SIGTERM and SIGINT should be catched and considered normal, I guess. Signed-off-by: Ferenc Wagner <wferi at niif.hu> --- tftpd/tftpd.c | 7 +++++++ 1 files changed, 7 insertions(+), 0

Signed-off-by: Ferenc Wagner <wferi at niif.hu> --- tftpd/tftpd.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/tftpd/tftpd.c b/tftpd/tftpd.c index 1f5d9d6..ff39c85 100644 --- a/tftpd/tftpd.c +++ b/tftpd/tftpd.c @@ -364,7 +364,7 @@ int main(int argc, char **argv) srand(time(NULL) ^ getpid()); while ((c = getopt_long(argc, argv, short_options,

> Correct. Like most UDP-based inetd services, tftpd is intended to be run in 'wait' mode. When the first request arrives, inetd starts the service but does not read the incoming packet (it can't, because it has no way to pass it along to the server). After that, inetd ignores that socket until the server exits. This isn't critical for tftp, but it does help to keep down the

Hello, we have two diskless machines in a routed network. Both get their IP adresse and tftp configuration via dhcp. When we start one machine all works well, when the second machine tries to download the kernel via tftp we get this error: Jul 8 09:49:52 voyager2 in.tftpd[8374]: RRQ from 10.63.5.122 filename /andreas/pxelinux.0 Jul 8 09:49:53 voyager2 in.tftpd[8374]: tftpd: read: Connection

I believe I have encountered a problem with tftpd-hpa very similar to the problem described in the following link: http://syslinux.zytor.com/archives/2003-May/001955.html We were running tftpd-hpa version 0.29 on RedHat 8.0 (on an older Dell desktop), and upgraded to tftpd-hpa version 0.42 when the problem was discovered; however, we are seeing the same thing after the upgrade. The TFTP

Hello, On my previous TFTP server I had logging. I did see all requests in logfiles. On my current TFTP server I have also added the options '-v -v -v', but nog logging. At least I can't find it them in /var/log/*/* Where does tftpd-hpa writes it's logging? Groeten Geert Stappers -- Leven en laten leven

Op 2013-08-26 om 09:35 schreef John McDonnell: > On Behalf Of Geert Stappers > Sent: Sunday, August 25, 2013 6:42 AM > > > > On my previous TFTP server I had logging. I did see all requests > > in logfiles. > > > > On my current TFTP server I have also added the options '-v -v -v', > > but no logging. At least I can't find it them in

Hi! I am using OpenBSD 4.4 with the build-in TFTP-Daemon for PXE. Distributing OpenBSD works fine. Now I want to distribute OpenBSD and WinPE. I've installed PXELinux 3.72 and configured it. Works also fine for PXELinux and distributing OpenBSD. To distribute WinPE I need a remap rule (\ -> /) for the TFTP-Daemon. I've created a file /etc/tftpd.remap with the following rule: rgG \\ /

Hi, when i look in my syslog i see. (syslog) Mar 12 04:40:49 linuxdev in.tftpd[15218]: RRQ from 10.1.5.121 filename scx.elf.gz Mar 12 04:40:49 linuxdev in.tftpd[15218]: sending NAK (1, File not found) to 10.1.5.121 here my client has asked for a file, and tftpd has said that it does not exist in its path (or cannot access it). looking in the tftpd.c (from 0.36) i see that on line 779 this

The default path is /var/run/tftpd-hpa.pid, which can be overridden by the newly introduced -P option. On normal termination (SIGTERM or SIGINT) the pid file is automatically removed. Moved setting the umask later, right before entering the select loop, so that it does not affect the permissions of the pid file. Signed-off-by: Ferenc Wagner <wferi at niif.hu> --- tftpd/tftpd.c | 38

I've got in.tftpd configured on a Fedora Linux server. The service is configured to boot printersm and sun sparcs. The printers boot fine, but there's a problem with the sparcs. When the sparc sends an initial request for a file, in.tftpd forks a process to handle it. If I do a "netstat -pan | grep tftp" I see that this forked process is listening on local address

Hi all, Sorry for posting here - but I figured there are many people with Cisco IP phones here - and I use them with Asterisk :-) I have a couple of Cisco 7940 phones. I've loaded the SIP firmware OK, loaded the SIP configuration files OK, they work with Asterisk just fine. My question is - will I have to keep on running the tftp server for them for ever and ever? Isn't there any

I cannot seem to get the remap-file function of tftpd working right. I can sucessfully place files on the server but the remap feature is not working. I look in the logfile and it has an entry in there for tftpd. remap: input: startup-config Jan 13 21:47:50 proxy in.tftpd[25438]: remap: done Jan 13 21:47:50 proxy in.tftpd[25438]: RRQ from 192.168.0.12 filename startup-config I think that I

Why tftpd doesn't support request from clients trying to tftp to the broadcast address? Will this feature ever appear in tftpd? Or is there any workaround for serving broadcast requests? Radek

If I omit --secure from the tftpd-hpa command line, I then need to e.g. `tftp -c get /var/lib/tftpboot/vmlinuz` instead of plain /vmlinuz, even though I pass /var/lib/tftpboot as the tftp dir in the tftpd-hpa command line. That essentially means that I'm exporting my whole /, which is clearly something I don't want to do. I basically want tftpd-hpa to serve files from /var/lib/tftpboot