Displaying 20 results from an estimated 2000 matches similar to: "Serial console"
2013 Dec 21
1
Serial Console Config in 6.5
Alle,
After upgrading from 6.4 to 6.5, our serial console configuration non
longer work. We have the following upstart file:
[cwfox at hilo ~]$ cat /etc/init/ttyS0.conf
# ttyS0 - agetty
#
# This service maintains a agetty on ttyS0.
stop on runlevel [S016]
start on runlevel [23]
respawn
exec agetty -h -L -w /dev/ttyS0 115200 vt100
[cwfox at hilo ~]$
And the following in /etc/securetty:
2013 Sep 30
1
SysRq over usb serial adapters
I am having trouble sending sysrq commands over USB serial, and I'm
not sure what else to check.
I have two identical machines, each with usb-to-serial adapters,
joined by a null modem adapter. One runs an agetty, the other
minicom. I can log in over the agetty as a user and it works as
expected, until I try to send a sysrq.
To send a break in minicom, I type [Ctrl]+[a] then [f]. Then I
2006 Jan 16
1
Problem with serial output
Hello,
I''ve got a problem to get a serial output on grub, xen, linux-xen0 and
getty. The serial works fine with grub, xen and linux-xen0, but I''m
unable to start a console, where I''m able to login. I dont''t get any
output. If I change only the getty from ttyS0 to ttyS1 than I''m able to
login..
At the attachment you can see what I see through a serial,
2010 Apr 29
9
illegal root login on `hvc0''
Hi,
I''m running Xen 4 on Slack64. I haven''t console login prompt to domU until
I changed xvc0 to hvc0 on /etc/inittab file. No I have access to login but
whenever I try to login I get this error from /var/adm/secure file
root@darkstar:/var/adm# cat secure
Apr 28 22:49:22 darkstar login[1286]: ILLEGAL ROOT LOGIN on `hvc0''
Apr 28 22:49:45 darkstar last message repeated
2015 Oct 15
3
CentOS7 - Serial Console and Flow Control
Hello List,
I'm ironing out details to upgrade a few systems to CentOS7.
My servers have BMC with Serial over LAN support. In C5 and C6, I
determined how to have BIOS/POST, kernel, and serial console access. I'm
reading up on the method to accomplish the pieces with C7.
Presently SoL output works, so I see BIOS/POST messages and the GRUB boot
list.
My changes to enable serial
2006 Aug 29
4
/dev/tty*: not a character device after reboot
Hello All
I just recently adopted a server with Gentoo/Xen as domain0 server with several domainUs attached to it. Please forgive my xen-noobness, but I was hoping that someone can help me out.
These images have not been updated in a long time, and I''m trying to get all the domainUs updated with their appropriate services patches, etc. I''m currently working on one Gentoo
2006 Jun 30
1
/etc/inittab: Serial access/ Console Server
>On Thu, 2006-06-29 at 20:48 -0700, Chris Fox wrote:
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>>
>> Rodrigo Barbosa wrote:
>>
>> > you might want to try agetty:
>> >
>> > T0:23:respawn:/sbin/agetty 9600 ttyS0 vt100
>> >
>> > Not sure if it will work, but seems likely.
>> >
>> I've always
2005 Jan 07
2
Asterisk 1.0.2 - Unable to allocate channel structure
Hi,
This morning I had some failed calls. On the console (and in the log)
I saw the error "Unable to allocate channel structure". Before I restarted
the process, I checked it's memory usage in ps and glanced at my free
memory in top. Asterisk was using a normal ammount of memory, about
40M. I don't think this was a system limit. This was running Asterisk
v1.0.2. Below is
2014 Dec 11
1
print something on console after boot
On Wed, December 10, 2014 17:51, Gordon Messmer wrote:
> On 12/10/2014 12:47 PM, Dan Hyatt wrote:
>> I've a virtual instance and I need to know its IP address after it has
>> finished booting up, to know where to ssh into it. I've tried adding
>> "ip -4 addr > /dev/tty0" to rc.local, but that obviously doesn't work,
>> because the login prompt
2011 Jan 07
5
Set font and size in xterm
I have a situation where gnome console does not handle vt102 escape
sequences properly and therefor need to employ xterm instead. When
I run xterm from a gnome terminal window I am presented with an
extremely small terminal window employing an almost unreadably small
font.
I have attempted to set the font size using xrdb and a custom
.Xresources file. I can change the colour scheme. I can
2008 Jan 01
2
Opensuse 10.3 does not charge dom0
I decided to upgrade from openSuse 10.2 to openSuse 10.3. I installed xen things, but when I boot using xen option the system is blocked. It appears the green window, with little suse logo in the middle, and mouse cursor, but the system crashes.
My computer is a Pentium 4 1,5 GHz, 512 MB of RAM.
I attached "diff boot.msg boot.omsg" (as diff opensuse-normal-kernel opensuse-xen-kernel)
2009 Nov 19
1
serial console config package?
I've been installing CentOS via PXE and using a serial console
interface. The installation works great. I notice that during the
install process, the following line gets added automatically to
/etc/inittab:
co:2345:respawn:/sbin/agetty ttyS0 9600 vt100-nav
Which package does this? Is it kudzu? Thanks for any insights.
--
Jiann-Ming Su
"I have to decide between two equally
2018 Jan 29
2
Centos 7 add-on serial cards
On 01/28/18 20:15, Fred Smith wrote:
> On Sun, Jan 28, 2018 at 12:10:29PM -0500, Pete Geenhuizen wrote:
>> I'm upgrading from CentOS6 to CentOS 7.
>>
>> I run 2 weather stations on C6 and have one of them attached to
>> ttyS0 which is on the motherboard, and the other to ttyS2 which in
>> on an add-on PCI serial card.
>>
>> I'm migrating the
2007 Jun 10
3
can't make mustek powermust 600usb work
Disclaimer: I've setup APC UPS monitoring and it works...
... but when it comes to mustek powermust 600usb (connected via
com-port), I can't make it work.
Got NUT installed via aptitude in ubuntu feisty and a basic setup,
exactly the same as for the apc, except for the name of the ups and
the corresponding section of ups.conf
--
[mustek]
driver = megatec
port = /dev/ttyS1
2001 Feb 28
1
com port acccess again
hi guys!
i have some problem whit wine about the $SUBJECT
i start my program and i get the following error
message:
ceta.2@sb-003:~/.wine/fakewin/csoft30 > wine
--debugmsg +comm --managed comkern.exe
err:win32:fixup_imports No implementation for
shlwapi.dll.0(StrRetToBufA)
imported from shell32.dll, setting to 0xdeadbeef
err:win32:fixup_imports No implementation for
2010 Feb 01
3
Not able to redirect console msgs to serial port
Hi,
Iam using cento-5.3 on x86 machine and iam working to get the console
messages redirected to serial port.
I have made the necessary changes in the /etc/inittab file.
- - - - -
id:3:initdefault
.
.
so:12345:respawn:/sbin/agetty ttyS0 9600 vt100
- - - -- -
and also in /etc/grub.conf file
- - - -
serial --speed=9600 --unit=0 --word=8 --parity=no --stop=1 terminal
--timeout=10 serial
.
.
2010 Sep 06
6
augeas and /etc/securetty
Hi, I need to add one line to /etc/securetty, say it needs to be ttyS1. Do
not add it if ttyS1 already exists in file /etc/securetty.
How to achieve this using puppet module in puppet 2.5? This file is
different than the other examples using augeas, this one only has value per
line, not name-val pair.
Thanks,
Hai
--
You received this message because you are subscribed to the Google Groups
2018 Jan 28
2
Centos 7 add-on serial cards
I'm upgrading from CentOS6 to CentOS 7.
I run 2 weather stations on C6 and have one of them attached to ttyS0
which is on the motherboard, and the other to ttyS2 which in on an
add-on PCI serial card.
I'm migrating the weather stations another host running C7 which has a
similar hardware configuration.? When I connect the weather station to
ttyS0 everything works fine, but when I try
2007 May 23
2
xen remote console and multiple admins
Hello,
I''m enjoying my Xen quest very much thus far.
Q: How does one handle the situation of multiple
root users on dom0
trying to `xm console'' to the same guest?
I was unable to use the virtual console at all until I
added a line to
inittab for agetty to spawn on xvc0. Now I''m not sure of
an elegant solution
for supporting multiple consoles (possible?), or even
2006 Apr 05
2
/dev/ttyS1 on Xen (domain 0)
Hi,
On a regular FC4 machine there are 76 device file for /dev/ttyS*.
I tried running minicom on a Xen machine (domain 0) whose serial port
is connected to a different machine (a machine with no VGA/Keyboard/Mouse).
It gave the following error:
minicom: WARNING: configuration file not found, using defaults
Device /dev/ttyS1 access failed: No such file or directory.
So I checked, and
ls