similar to: Has anyone used a Dell with a PERC H310?

I''m trying to configure a DELL R720 (not a pleasant experience) which has an H710p card fitted. The H710p definitely doesn''t support JBOD, but the H310 looks like it might (the data sheet mentions non-RAID). Has anyone used one with ZFS? Thanks, -- Ian.

Hi all, We have a server with a LSI 9240-4i controller configured in JBOD with 4 SATA disks. Running FreeBSD 9.1-Beta1: Relevant dmesg: FreeBSD 9.1-BETA1 #0: Thu Jul 12 09:38:51 UTC 2012 root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 CPU: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz (3200.09-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x206a7 Family = 6 Model =

Howdy, I know that syslinux doesn't currently support this, but does anyone here know how I might go about getting some sort of boot process together that would have a single firmware image as opposed to seperate files for initrd, kernel, and root fs? Thanks.

Hi, I have been trying to boot a PC based terminal using your PXELINUX project and I am having a problem. The Terminal (a Netier NetXpress XL2000) has a m-systems Disk-On-Chip 2000 flash memory module which is normally used to boot a cut-down version of WinNT. I work in a repair department where we often have to open up these terminals and temporarily install a hard-drive to reflash the

Does anyone know if a PERC H200 is a real RAID controller? I'm about to build a box to CentOS 6.5 (it was Windows...) with RAID 6 on Monday, and this PE R610 has this.... I'm familiar with PERC 6 and 7s, but just dunno 'bout this one. mark

I got a Dell T110-II server on 2013-July-19. It has two 1Tbyte drives that the PERC H200 controls, RAID 1. I tried to install FreeBSD-9.1-RELEASE from a DVD from FreebsdMall. The autopart segfaulted, evidently because it could not find any disks. I think there is a PR about the segfaulting (bad bug, no messages). I worked around the problem by going to the loader prompt when the initial

Hi All, I''d like to ask about whether there is a method to enforce a certain txg commit frequency on ZFS. I''m doing a large amount of video streaming from a storage pool while also slowly continuously writing a constant volume of data to it (using a normal file descriptor, *not* in O_SYNC). When reading volume goes over a certain threshold (and average pool load over ~50%), ZFS

Hi all ! Thanks for the very good support of Dell R320 hardware, perc H310 is well supported, BCM5720 seems to work correctly and performances are great. The only problem i have found is very strange. The FreeBSD bootloader take many times to load, 30sec-2minutes to boot the kernel and show the bootloader menu. After that, the system boots properly, at a normal speed. Is there any issue or

Anyone have any experience with a R510 with the PERC H200/H700 controller with ZFS? My perception is that Dell doesn''t play well with OpenSolaris. Thanks, Geoff

Hello, Has anyone out there been able to qualify the Proliant DL360 G7 for your Solaris/OI/Nexenta environments? Any pros/cons/gotchas (vs. previous generation HP servers) would be greatly appreciated. Thanks in advance! -Anh

Here is info. about the Raid controllers. Doesn't seem to be the culprit. Slow host: Name PERC H710 Mini (Embedded) Firmware Version 21.3.4-0001 Cache Memory Size 512 MB Fast Host: Name PERC H310 Mini (Embedded) Firmware Version 20.12.1-0002 Cache Memory Size 0 MB Slow host: Name PERC H310 Mini (Embedded) Firmware Version 20.13.1-0002 Cache Memory Size 0 MB Slow host: Name PERC H310 Mini

So I have this dual 16-core Opteron Dell R715 with 128G of RAM attached to a SuperMicro disk enclosure with 45 2TB Toshiba SAS drives (via two LSI 9200 controllers and MPxIO) running OpenIndiana 151a4 and I''m occasionally seeing a storm of xcalls on one of the 32 VCPUs (>100000 xcalls a second). The machine is pretty much idle, only receiving a bunch of multicast video streams and

> On Nov 11, 2020, at 5:38 PM, Warren Young <warren at etr-usa.com> wrote: > > On Nov 11, 2020, at 2:01 PM, hw <hw at gc-24.de> wrote: >> >> I have yet to see software RAID that doesn't kill the performance. > > When was the last time you tried it? > > Why would you expect that a modern 8-core Intel CPU would impede I/O in any measureable way as

We are looking at building a storage platform based on Dell HW + ZFS (likely Nexenta). Going Dell because they can provide solid HW support globally. Are any of you using the MD1200 JBOD with head units *without* an MD3200 in front? We are being told that the MD1200''s won''t "daisy chain" unless the MD3200 is involved. We would be looking to use some sort of

What is your gluster setup? Please share volume details where vms ate stored. It could be that the slow host is having arbiter volume. Alex On Feb 26, 2018 13:46, "Ryan Wilkinson" <ryanwilk at gmail.com> wrote: > Here is info. about the Raid controllers. Doesn't seem to be the culprit. > > Slow host: > Name PERC H710 Mini (Embedded) > Firmware Version

All volumes are configured as replica 3. I have no arbiter volumes. Storage hosts are for storage only and Virt hosts are dedicated Virt hosts. I've checked throughput from the Virt hosts to all 3 gluster hosts and am getting ~9Gb/s. On Tue, Feb 27, 2018 at 1:33 AM, Alex K <rightkicktech at gmail.com> wrote: > What is your gluster setup? Please share volume details where vms ate

Hello list- I'm having an extremely odd issue with an installation of mine. The system is running * 1.2.12.1 and currently handles around 100 handsets. With the exception of a few Grandstream DTA's, all devices are Polycom 320, 430, or 601's. After a recent power outage, I'm having an extremely odd issue with one of the handsets. One of the Polycom 601 units simply reboots every

I would be really supprised if the problem was related to Idrac. The Idrac processor is a stand alone cpu with its own nic and runs independent of the main CPU. That being said it does have visibility into the whole system. try using dmidecode to compare the systems and take a close look at the raid controllers and what size and form of cache they have. On 02/26/2018 11:34 AM, Ryan

John Todd wrote.... > For those of you wanting to salvage your Cisco ATA-186 after > inadvertent locking, or after recovering your devices from a vendor > who has locked them, here is a rainy-day project for you: > somedoc.pdf..... Immediately strides to ATA, rips off cover... woohoo, EEPROM is socketed.... well maybe I'll just copy the contents of a working ATA into the

Hi Everyone, I have a Dell R210 server which has a Xeon X3430 Quad Core CPU (2.4Ghz x 4) with 8GB of RAM. I intend to use the H200 controller in a RAID1 setup How many VMs do you think I''d be able to run on this machine? Is 20 pushing it? I''d say most (if not all) guests would be in PV mode. Thanks _______________________________________________ Xen-users mailing list