similar to: root device for CentOS AMI would be /dev/sda1?

Hi all, Is anyone successfully running/has succesfully upgraded to 2.6.32-220 from, say, 2.6.32-71.29.1? (i.e. done a normal run-of-the-mill yum update on, say a 6.0 instance all the way up cleanly to 6.2? Reason I ask is that booting into -220 (and I think also into -131 as well) results in a kernel panic for me. Some digging around and the new kernel seems to be enumerating the drives with the

Hi all, I''ve got xen-4.1.1 running with linux-3.0.0-rc5 and am trying to start my first guest, f14-x86_64, which does boot on bare metal. The configs below show kernel, ramdisk, and disk assignments for the virtual machine. They also show that the virtual machine uses the target disk devices. The last section shows part of the boot sequence starting with the disk assignments,

I recently started having this issue after enabling nat networking for my domU. The domU is booting the 2.6.32.27 kernel with an initrd i generated and was using before just fine. Output is as follows. Any help would be appreciated. Here is the output I get: 0.161289] xvde1: detected capacity change from 0 to 10486808576 > [ 0.260033] XENBUS: Device with no driver: device/console/0

Hello, I have been running Samba4 on a Ubuntu 12.10 for a few months. Using this setup script, I have also been using PBIS (Open-wise 7.1) to connect Linux clients to it. I have has this setup for serveral months. Now if I connect to a windows computer I get access denied and it still works on linux via PBIS. If I login to the windows computer with a local account, I can

Hello again, My kernel is correct, and it''s always been correct. This error only happens if I start two or more VMs in quick sucession. If I wait a short while (i.e. time to figure out why a VM started then died) and try again, it''s fine. For testing purposes I''m using loopback files, 2 for each VM (1 filesystem, 1 swap). -- Mike Williams System Administration

Anyone have a solution for this, it appears in the log every time a user accesses their E-Mail via IMAP it obviously relates to filesystem quotas. I'm running: Linux version 2.6.9-34.ELsmp dovecot-1.0.rc2 Disk quotas for user aweaver (uid 1880): Filesystem blocks quota limit grace files quota limit grace

Dear All, I have using CentOS 4.4 and My PC USB Drive is detected and but the device "/dev/sda1" is not initialized and i have executed the dmesg command and I am getting the following messages usb 1-6: new high speed USB device using address 2 SCSI subsystem initialized Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage

Hi, when i try to set up a DomU with the following configuration: dir = /home/xen debootstrap = 1 size = 4Gb memory = 128Mb swap = 128Mb fs = ext3 dist = dapper image = sparse dhcp = 1 kernel = /boot/xen0-linux-2.6.16-11.1-generic initrd = /boot/xen-modules-2.6.16-11.1-generic mirror = http://archive.ubuntu.com/ubuntu/ and try to start it with: root@ubuntu:/etc/xen# xm create dapperDomU.cfg -c

Hi, I wanted to ask it on elli_dbergs''s thread ''problem with xm create'', but it seems that my message was never gonna be published (waited for 24 hours til i figured it was taking way too much time). So i''m working with Xen unstable, installed dom0 over Ubuntu 8.10, no problem so far apparently, reboot on Xen, then I go to /etc/xen to get some example config

I just tried to setup another domain on a server running 1 domain. When i try to start the domain it gives me an error Error: Device 0 (vif) could not be connected. Backend device not found. The entry in my xen config file for the disks is disk = [''phy:/dev/xen001/xen2-fun,sda1,w'',''phy:/dev/xen001/xen2-fun-swap,sda2,w''] Looking at /var/log/xend.log, i found

Dear all, I have a reproducible issue with centos54 dom0 and debian lenny domU using pygrub. As far as I enter "shutdown -r now" in the running Debian Lenny DomU the whole system hangs. Keyboard is dead, network is dead and no more logging. Ending up in a hardware reset of the box. I was able to reproduce this 3 times. Restarting with xm reboot debian50 works without problems. Is there

On Fri, Apr 26, 2019 at 11:25:13AM +0200, Christoph wrote: > > Hi > > libvirt 5.2.0 should support maxGrantFrames setting for xen (changelog). > I get ever an error if I use it in the config: Hi > <domain type='xen'> > <name>satan.chao5.int</name> > <uuid>f1f96b1c-fb75-4707-afb7-604d696d29cc</uuid> > <memory

Am 2015-09-17 09:29, schrieb Pasi K?rkk?inen: > > Are you using nfs over UDP or TCP ? > TCP, but Network cant be the bottleneck, have tested it with iperf between bare metal/domU's and the nfs domU and it was perfectly fast... > > I don't think. > > > If you used NFS over UDP, try running it over TCP. no I use it over TCP... > > What does

Hi libvirt 5.2.0 should support maxGrantFrames setting for xen (changelog). I get ever an error if I use it in the config: <domain type='xen'> <name>satan.chao5.int</name> <uuid>f1f96b1c-fb75-4707-afb7-604d696d29cc</uuid> <memory unit='KiB'>3145728</memory> <currentMemory unit='KiB'>3145728</currentMemory>