similar to: Re: CentOS-5.0-x86_64-bin-DVD-ich9.iso.delta md5 mismatch

Michael Rock napsal(a): > all-generic-ide irqpoll > > Without irqpoll it just hangs and without > all-generic-ide it get a kernel panic. So I still > need both to recognize the disk and continue booting. > Michael, > I have tested 8.1.14 ICH9 x86_64 version and it's kring fine. For sure > im right now uploading full DVD isos. I did not want to :o( due due to >

Oops sorry, ugh another poor selection of words as I meant to say "When I saw the rest of my post snipped, I then realized that last request sounds really bad, which was not my intention. > When you snip the rest of my post man that last > request sounds really bad on its own. Sorry guys. I > saw the "uploading the new DVD's" a few days ago and > thought I would

btw - I installed your x86_64 rpms that has the ich9 patch directly on that box but it still will not boot without all the options. --- Michael Rock <mikerocks65 at yahoo.com> wrote: > > David wrote: > > Now there are right md5sums and even > > x86_64 iso.delta. > > David > > I tried using applydeltaiso and it creates a 2gb ISO > but I notice it fails on

Michael Rock napsal(a): > Hi Dave, > > I am using applydeltaiso with your delta and > CentOS-5.0-x86_64-bin-DVD.iso 4,186,786 bytes from one > of the Centos mirrors. But the block size is wrong and > does not match the image length. > > So I checked the md5 on your delta and it does not > match your md5.txt file. I downloaded it again to be > sure. > > Your

David wrote: >I'll test DVD tomorrow. Today new kernel RPMS are > being built. What ptions are you talking about? > David all-generic-ide irqpoll Without irqpoll it just hangs and without all-generic-ide it get a kernel panic. So I still need both to recognize the disk and continue booting. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo!

Hi all, I've the same problem, I've download the CentOS-5.0-x86_64-bin-DVD.iso from one centos mirror, i've applied deltaiso and the created image is 2 GB, the md5sum check of iso.delta (CentOS-5.0-x86_64-bin-DVD-ich9.iso.delta) is ok, what's wrong ? deltaiso program exit on the same as Michael , maybe I've downloaded the worng DVD 64 bit iso version? do you know any good

> David wrote: > Now there are right md5sums and even > x86_64 iso.delta. > David I tried using applydeltaiso and it creates a 2gb ISO but I notice it fails on applying. kdnssd-avahi-devel.i386: copying unchanged payload kernel-xen.x86_64 (???): applying delta new payload open failed __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has

I have 2 new boxes that I cannot use yet because of problems supporting these newer chipsets in 5.1. Does anyone know when the CD version of 5.0 x86-64 that has support for these chipsets be available on any on a Centos mirror? Has the support for these chipsets been added to yum yet? Here are my latest results with these chipsets and Centos 5.1 1. Asus P5K, E6850, P35 Chipset: Does not

I am enclosing scripts and config files to generate exact copy of CentOS 5.0 i386 installation DVD image, that is CentOS-5.0-i386-bin-DVD.iso if you have CD images for i386. If there is interest I can post the same for x86_64. Please follow README files for instructions. All the scripts are GPL. SHA1 for attached files: 439f7b0bd50722388a2836eedafeb1c227f97385 *00_README.txt

Hi All, I found it very difficult to get Xen-3.1 up on a a machine with Intel''s ICH9 family of disk controllers :-(. Is the ICH9 support really there in xen-3.2 ? I tried but was not successful in booting even xen-3.2 from xen.org. Did anyone have a success? Or any help on what extra config options I need to pass while compiling a domain0 from xen sources? Thanks, -- Pradeep Singh

Hi, full ICH9 support for Centos 5 can be found http://fs12.vsb.cz/hrb33/pub/ Take it as a workaround until CentOS 5.1 is released. I hope ICH9 to be included in this version. Support is done by backporting from new kernel versions. Delta file is created with mkdeltaiso from CentOS-5.0-i386-bin-DVD.iso, so full image can be created with applydeltaiso. Regards, David Hrb??

Hi, Well, ICH9 support for CentOS as announced on Oct 16th by me http://lists.centos.org/pipermail/centos/2007-October/088104.html has been extended. Today I have published x86_64 install DVD. You can find it here: http://fs12.vsb.cz/hrb33/pub/ich9/ Regards, David Hrb??

Hi; I'm looking for CentOS 5.0 x86_64 dvd iso (preferably not torrent); must be 5.0 All my web searches have come up with more recent versions of 5.x, not 5.0. Can someone give me a URL I can wget with? I'd even be willing to throttle down the wget). Thanks, Ken Wolcott

Is anyone having problems with the newly released centos 5 CentOS-5.0-x86_64-bin-7of7.iso<http://mirrors.easynews.com//linux/centos/5.0/isos/x86_64/CentOS-5.0-x86_64-bin-7of7.iso>(-x86_64). During installation the installer accepts all other iso i burnt on cd except

Hello, I'm trying to complete a minimal install of Centos 5.1 x86_64 on a Core 2 Duo 2.2Ghz running on an Asus P5K-VM motherboard - yes, this means it's the G33 chipset. (you can stop laughing now) I'm installing to two SATA-disks setup with Software Raid-1. I've installed an Intel NIC that is detected during install and I'm able to complete the install itself - mind you I

>I probably shouldn''t have been operating machinery yesterday. >The crash is probably because I committed the e820 memory rearranging >stuff into the wrong branch, but something may have broken us from >tip/master as well. >   J Kernel was already broken at 2/28/09 --- On Sat, 2/28/09, Marc - A. Dahlhaus <mad@wol.de> wrote: From: Marc - A. Dahlhaus

Been running rock solid servers on Centos 3 and 4 for years but equipment is starting to die so it is time. I was thinking along the lines of an Intel Q6600 on an Asus P5K-VM mobo with the new G33 chipset utilizing SATA. Is anyone having success with this board or any of the G33 chipsets where I am not going to run into all kinds of install problems? I see these other threads of install

I just bought a new computer, Asus P5K motherboard, Intel Core 2 Duo, WD Data drive. I place the CD1 for CentOS5, boot and get: GRUB Loading stage1.5. GRUB loading, please wait... Error 16 Any suggestion? -- Thanks http://www.sqlhacks.com The SQL Server knowledge base

Hello, i installed Cs 1.6 on ubuntu 10.04 using wine. But i have one problem. When i play game, after 5-10 minutes my sound in game suddenly turns off. And i need to restart cs to solve this problem. Can you help me with this. Also i have fps about 50. Can i get it up to 70 [Rolling Eyes] :) My configuration Asus P5K Intel Core2Duo E6550 2.33 GHz Nvidia 8600GT 256MB Kingston 2GB [Laughing]

on an ASUS P5K-E wifi (wifi disabled in bios) board with: 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12) centos 5.1 did not configure the device. Anyone else see this or have a solution? Tried forcing sky2 module, but init just says device does not seem to be present even tho lspci shows it on the bus. Is there another kernel