similar to: Xen crashes?

hi, i cleared all the stuffs(everything) related to xen and libvirt. i installed freshly xen-4.2.1 from the source. *Installation steps are as follows:* apt-get build-dep xen apt-get install libc6-dev libglib2.0-dev libyajl-dev yajl-tools libbz2-dev bison flex zlib1g-dev git-core texinfo debhelper debconf-utils debootstrap fakeroot *OR* apt-get install bcc bin86 gawk bridge-utils iproute

Hi all! I have installed xen on fc6 with kernel 2.6.18-1.2798.fc6xen with rpm package; i have create 3 guest os (fully virtualization) with virt-manager tool, installed on separated partition: 1 fc6 guest, 1 centos 4.4, 1 windows xp pro; all work pretty fine until this point, i have linked the configuration file of the guests machines to /etc/xen/auto for autostart/autostop, but when

Package: xen-utils-common Version: 4.3.0-3 Severity: normal Dear Maintainer, I've just set up a fresh Jessie system using the installer dated 2014-03-05, then installed and enabled Xen 4.3. I've done this quite a few times before using Wheezy and 4.1. I set up xenbr0, then created a test domU using xen-create-image, which completed without issue. However I was unable to start the new

Processing commands for control at bugs.debian.org: > close 726827 4.4.0-1 Bug #726827 [xen-utils-4.1] xen-utils-4.1: Xen doesn't start on a laptop with Nvidia Optimus graphics There is no source info for the package 'xen-utils-4.1' at version '4.4.0-1' with architecture '' Unable to make a source version for version '4.4.0-1' Marked as fixed in versions

Hi I am trying to install xen (64bit) on a Dell PowerEdge 2900. The installation process was something like the following: ----- apt-get install iproute bridge-utils python-twisted binutils zlib1g-dev python-dev transfig bzip2 screen ssh debootstrap libcurl3-dev libncurses5-dev x-dev build-essential gettext python-pyopenssl python-pam python-xml latex tetex-extra tetex-base

>/ On Mon, 2007-12-10 at 22:34 +0000, Karanbir Singh wrote: />>/ Just wondering if people had started using i386 Xen DomU's on a x86_64 />>/ dom0 machine with 5.1 as yet ? And just wondering what their experiences />>/ have been. /I thought I would chime in here with my experience. I am running a Cent5.1 x86_64 Dom0 with a Cent 5.1 x386 domU (both fully updated).

CentOS 5.5 Xen "standard" Xen Installation. I have two nics. I just put the second one to DHCP and modified the ifcfg-et01 and so far I am holding, but I am not confident. Prior they were sequential IP Addrs on same subnet. arpwatch has indicated flip flips. I can find no rhyme or reason to predict them. I know I missed I must have missed a step somewhere. I want to keep the

-------- Original Message -------- Subject: Re: [Xen-users] network-bridge does not create veth or peth devices Date: Wed, 28 Nov 2007 14:42:25 +0100 From: Ingard Mevåg <ingardm@startsiden.no> Organization: ABCStartsiden To: Luciano Rocha <strange@nsk.no-ip.org> References: <474D6492.5030807@startsiden.no> <20071128130205.GA1838@bit.office.eurotux.com> Luciano Rocha

Hello, The basic details of my host and XEN configuration and network configuration all appear below. Whilst I have come this far, a lot of it has been intuitive so I now have plenty of questions. Firstly I would like some help and clarification with regard to ebtables and especially how it works in a Virtualized environment on Novell SUSE 10 SP1 (1) ebtables Installation ebtables was not

I'm getting a "Too many open files" on a fileserver. Is it possible to list how many open files each process has? If so how do you do that? Greets, Chris -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20070821/3d8eb5d3/attachment.html>

Dear Tinc Experts, I have been struggling for some time now, with Tinc pre3, and firewall rulesets and routing. I did once manage to get Tinc to work okay in a test-bed environment. I then tried to set it up for a 'real-life' setup and cannot get it to work properly. My real-life setup looks like this: Network A: 192.168.1.0 / 255.255.255.0 192.168.1.7 tap1 device gateway >

Dom0: Wheezy 64 bit with kernel from package linux-image-3.2.0-2-amd64 version 3.2.12-1, package blktap-dkms and all dependency packages for xen, spice and usb redirection. ------------------------- /etc/modules ------------ loop max_loop=64 xenfs xen-evtchn blktap ------------------------- hg clone http://xenbits.xen.org/xen-unstable.hg (in this build changeset is 25194:6b72eb3b40cf) # Qemu

I have a server running Centos 5.2 as a Xen host. A problem that's shown up recently is that at boot, the dom0 interface eth0 doesn't come up properly, with the result that the host is only accessible via remote console. If I execute 'service network restart', eth0 comes up normally, with an IP address and the correct routing. Three guests have been created via virt-manager

Hi Tinc Mailing-Group, Having set up the kernel correctly, and got tinc running successfully, I am now trying to get two VPNs running at once. Hence I need to have two ethertap devices ( /dev/tap0 and /dev/tap1 ). The first tap0 device was created thus: mknod -m 600 /dev/tap0 c 36 16 chown 0.0 /dev/tap0 The second tap1 device was created too: mknod -m 600 /dev/tap1 c 36 17 chown 0.0 /dev/tap1

I have a virtual machine in a Xen LV, that I would like to backup from hostA to hostB because hostA is software broken. How do I copy and recreate that LV on hostB? Greets, Chris -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20071213/bce2df4a/attachment-0002.html>

Hello. I am trying to get multi paths running, i.e I want to specify 2 paths from a particular node to another. To test this, I am setting up the following scenario: I create 2 tap devices tap0 = 10.1.1.1/32 netmask 255.255.255.0 tap1 = 10.2.2.2/32 netmask 255.255.255.0 I then issue the route command: ip route add 10.3.3.3/32 nexthop via 10.1.1.2 nexthop via 10.2.2.3 The route table

Hi, I have some questions about running multiple tinc deamons. The docs say you can do it to support separate VPNs, but I don't see any examples. I have been running a single tinc vpn for months with no problems, now I'm trying to add a second separate vpn. I'm running the static tinc version 1.0pre7 (built Apr 9 2002 14:00:34, protocol 14) on Debian potato. I did not want to go

Hello list, Please don''t shoot me. I know I''m doing something with bonding that bonding wasn''t made for. I just want to give it a try. I want a simple mechanism to have a failover on a 24Mbit line to a 2Mbit line in case the 24Mbit line goes down. Between A and B there are two lines: a 24Mbit and a 2Mbit. I use two OpenVPN tunnels with tap devices: +-- tap0 (A)---

Package: xen-utils-common Version: 4.1.2-5 Severity: grave Hi, Between 4.1.2-3 and 4.1.2-5, the sanity checks on the variables defined in /etc/default/xendomains (XENDOMAINS_SAVE, XENDOMAINS_RESTORE, etc.) was lost. I can't check exactly when because there's no Vcs defined for this package. 4.1.2-3 had in /etc/init.d/xendomains for restore: if [ "$XENDOMAINS_RESTORE" =

Hello all. We are moving from Xenserver 6.5 environment to KVM because we can't use 10gbe speed in our VM's so we decided to test KVM. To inicial test I've create script, using qemu commands, to build two VM's and test the nic speed. Each VM has one nic, using virtio, into it own bridge. In this bridge we associate one 10gbe physical nic. They can communicate each other. When