similar to: asterisk 11 and DAHDI/i4

Hi, So I've done my research on Chanisavail, read the wiki, checked the archive but can't seem to find anything to suit my scenario. I've played around with it a lot, but I'm still scratching my head on what I need to do. What I need is to be able to accept a call by SIP and ring all telephones that are not in use (which just so happen to be on Zap interfaces, but might be SIP

Hi, all. I'm making my first foray into AEL. I'm starting with a simple macro, but I've already encountered an odd behaviour. I'm wondering if someone can shed some insight: Asterisk 1.2.9.1 macro newPlaceCallPSTN { s => { TIMEOUT(absolute)=7200; NoOp(Analog Out List: ${ANALOGOUT}); ChanIsAvail(${ANALOGOUT}); NoOp(Available Out List:

Here's my situation. I have two receptionists that answer incoming lines. Each has a 7960G with 5 incoming lines each. I'm trying to set this up so each line on each phone doesn't utilize call waiting. My problem seems to be that ChanisAvail(Sip/cisco1&Sip/cisco2&Sip/cisco3&Sip/cisco4&Sip/cisco5) always returns cisco1. Here are the sip.conf entries: (mind you,

I'm testing ChanIsAvail context and it is not working for me. exten => 55,1,ChanIsAvail(SIP/11&SIP/21) exten => 55,2,Cut(theChannel=AVAILCHAN,,1) exten => 55,3,Dial(${theChannel},r) exten => 55,4,Hangup exten => 55,102,Goto(s,4) It is not dialing SIP/21 when I'm talking on SIP/11, it execute Hangup instruction instruction. According to notes: The channels are checked

A call comes in and goes into the queue, the queue dials a sip channel using a macro. The macro plays a set of options to the callee and if the callee presses 3 it sets MACRO_RESULT=CONTINUE and the macro ends. For some reason the caller goes back into the queue rather than continueing on in the dial plan. Why is this, i could have sworn in 1.2 if i set MACRO_RESULT=CONTINUE that the

I have a USB to serial converter attached to my box. pl2303: Prolific PL2303 USB to serial adaptor driver if I login to the box and send/receive serial commands over this unit it works without error EVERY time. however, if I run the same command set from with-in the extensions.conf with System() I get errors in dmesg like "pl2303 ttyUSB0: pl2303_open - failed submitting read urb, error

I sent this earlier under "Editting variable contents" but no-one has responded. So, the subject is now more to the problem, instead of the solution I was trying to implement. ChanIsAvail returns the channel ID plus "-<session>". How can I edit ${AVAILCHAN} to remove this session ID, so I can use its contents in a subsequent Dial statement? Dialing on Zap just gives a

I'm trying to add an emergency dial to my context. However, when I try to dial it, I get caught in an endless loop. For debugging, I have pared out nearly all the control flow and just have ChanIsAvail() and Dial() called. Using two different extensions to call teh same number, I get two different actions by *. Here is the vvverbose output: -- Starting simple switch on

Some progress to report: I had to run asterisk as the user logged in - actually not even that. I could not "su user -c " to that user - I had to run it as that user. Then I did a test and got audio! Great... But when I do a second test. Asterisk HANGS on ChanIsAvail() Then I thought lets SKIP that - and just let it do the Dial() - I stopped everything - got it running again. - and

Hello all. Has anyone had any success using ChanIsAvail with only SIP channels? Is there another, better way to check if an extension is busy without dialing it? Thanks, B. J. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040109/48ac2c3e/attachment.htm

ok switching to "Console/default" does show the text --- <("<) --- Call to device 'default' on console from 'default' <2564286000> --- (>")> --- --- <("<) --- Auto-answered --- (>")> --- However I don't hear any audio. Thanks Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

Is there a way to differentiate between a SIP address which hasn't registered (but is within sip.conf) and one that's not there at all (i.e. not in sip.conf) using a straight dialplan. I'd like to differentiate actions depending the state of a SIP device and whether it's in my config or not (if that makes sense, basic automap of dial-in lines to sip phones, but if they've

Greetings: I did some quick searching of my history of this list, and I tried a quick Google search as well, but perhaps someone on the list can quickly answer this question. I have a very nicely working Asterisk system at home with two Digium X100P FXO cards. When my SIP phones want to dial-out I have them setup to grab the first analog card (Zap/1) with the following extensions.conf segment:

How I change my configuration to reduce this issue. I have this setting on my zapata.conf signalling=fxs_ks group=1 callgroup=1 pickupgroup=1 channel=1 signalling=fxs_ks group=2 callgroup=1 pickupgroup=1 channel=2; singalling=fxs_ks group=3 callgroup=1 pickupgroup=1 channel=3; singalling=fxs_ks group=4 callgroup=1 pickupgroup=1 channel=4 and for outbound calls I have this context on my

Hello, Is there a asterisk developer guide/source code doc or something like that? I want to see if I can implement the admin menu function for meetme. Foong -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030922/3ff8a388/attachment.htm

Hi folks, I'm sure I had this in a previous life :-) Basically the ability to dial with autoselection of either IAX2 or SIP depending upon the registration of the endpoint. Ok, I have probably missed it in the wiki as well..... hints ? Gary .

> > > Just to verify that you did rerun configure after installing the libraries? > > Doug > Oh that is a good one - I thought I did - but apparently not. menuconfig now shows "*" So is chan_alsa going away ? What is it being replaced with? thank you! Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, Is there a variable that contains the Sip Peer name? I was using ${CALLERID(num)} for outgoing calls, but when a call is being transferred, that variable contains something else. I need a variable that is always set to the SIP Peer's name. Thanks Dan -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I'm trying to use ChanIsAvail to build a resilient 'dialout' macro. The logic is simple; try Zap/g1 (a group of two E1s), and if that fails, try locating a channel via DUNDi. Here's a massively cut down version to illustrate the problem I'm having. macro dialout ( dest ) { ChanIsAvail(Zap/g1); noop(Value of AVAILCHAN is ${AVAILCHAN});

I am trying to construct a macro for long distance dialling. I have two internet feeds, I have all routes including Teliax on Internet A and a static route to Voxee on Internet B. I thought I could use the dialplan entry below which uses the ChanIsAvail() command to check the connection, but this returns the provider but not the username, so I don't understand how to use this for real