similar to: Opus RTP/RTSP support

hi I am getting this error: -- Executing [50 at smvoice-sip:1] Answer("SIP/440-0856dd70", "") in new stack -- Executing [50 at smvoice-sip:2] rtsp("SIP/440-0856dd70", "rtsp://192.168.1.175/img/video.sav") in new stack [Apr 30 11:22:48] WARNING[8031]: app_rtsp.c:1037 rtsp_play: >rtsp play [Apr 30 11:22:48] NOTICE[8031]: rtp.c:1287 ast_rtp_read:

Greetings: It would be nice if Icecast supported RTSP; however I would appreciate any suggestions for a small RTSP/RTP solution to encode 8kHz mono audio in GSM or ADPCM and service multiple unicast client connections. The ideal would be a black-box hardware solution with an audio input and ethernet interface similar to broadcast studio IP audio links or the network audio capabilities of certain

Hi Where do I find instruction to configure icecast as a reflect server for rtsp? Scenario: Client1 sends audio to IceCast via rtsp Client2 receives audio from IceCast via rtsp. I need to just setup this behaviour.. -Atul -- ------- To make world a better place to live in ------- -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi I need to stream ogg/theora over RTSP in order to use in opera browser HTML 5 video, but I cannot find any streaming server to do that. -- best regards, Daniel Silva -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.xiph.org/pipermail/theora/attachments/20100311/f4ec72d2/attachment.htm

Hello, I am trying to stream an IP Camera output (h264) into a conference. The IP Camera supports RTSP. Searching around the web, I believe the RTSP support (was) available through app_rtsp (external to Asterisk distribution). This, I believe, has problems and has issues compiling in Asterisk 11 (I tried compiling it in Asterisk 11 and it failed). I may not be able to use DiaStar or i6net's

Thomas B. Ruecker wrote: > Michael Grigoni wrote: > >>Greetings: >> >>It would be nice if Icecast supported RTSP; > > It probably never will > >>however I would >>appreciate any suggestions for a small RTSP/RTP solution to >>encode 8kHz mono audio in GSM or ADPCM and service multiple >>unicast client connections. > > why not use

Hello All, I''m running performance tests on a Linux router using IPTables to nat traffic over the network. I have a MS Media streamer, and two windows clients behind the router which download video from the streamer. I can then measure performance. MS Media player rolls amongst protocols until it finds one it can use as follows RTSP UDP RTSP TCP MMS UDP MMS TCP HTTP Unfortunately it

Hi, I have been trying to use wine to get at a streaming quicktime server on Ubuntu 8.04, but as of yet no luck: The server streams mov files over RTSP First I tried using just VLC to play it, but there are some things it just can't handle (in windows I get an error about 'sowl' not being supported or something like that) Now I am trying quick time alternative in wine along with

I am playing with gstreamer on CentOS 7.1 . All the packages are there except gst-rtsp-server.... OK - So I went to look for it to compile it. Found a version that was NOT 1.0.7 and my compile stopped because it said the versions are not the same.... OK so went back to look for 1.0.7 and its not there. I looked at: http://gstreamer.freedesktop.org/src/gst-rtsp-server Any thoughts on how I

Atul S Vasu wrote: > Where do I find instruction to configure icecast as a reflect server for > rtsp? Icecast doesn't suppport RTSP. Only HTTP. Geoff.

I am having problems making RTSP connections to a Windows Streaming Media Server (ie "connecting to media...." but WMP never connects). There are no error messages in /var/log/messages. It was suggested to me that SNAT might perform better than MASQ in this respect. I edited my shorewall/masq file as such: eth0 eth1 12.34.56.78 or should it be? eth0 10.0.0.0/24

Thanks Arthur, > On 7/31/05, Richard <rpm@16hd.freeserve.co.uk> wrote: >>Can anyone advise whether there are any plans for icecast to support >>rtsp (real-time streaming protocol), as used by RealPlayer, Apple >>Quicktime etc.? >>Alternatively - though I really like icecast and want to keep with it >>perhaps someone can suggest an open-source

With the new 3.01 and 3.07 version I found a big slowdown booting from USB devices. On my PC it takes more than 2 minutes to load the kernel and the initrd filesystem. Compared with the previous behaviour of syslinux 2.13 with takes only 10 seconds or little more. The BIOS boots in FDD mode (DriveNumber variable is 0). I've also tried to disable the EDD support in the source. But the boot

Hi, I've a usb-key that boot regularly on a PC using syslinux 2.09; well, this PC (a thin-client) at the moment is the only PC that can boot from USB in my office... and it usually booted oretty well, without any hacks... After changed to syslinux 3.07, it stopped booting, showing a simple "BOOT ERROR" message, nothing more... Reverting to syslinux 2.09, it restarted to work...

Only to inform that I've just released the version 1.2 of makebootfat. makebootfat is a GPL command line utility able to create bootable USB disks for Linux and Windows using the FAT filesystem and syslinux. As far I know it's the most advanced tool available able to make bootable USB disks. It's able to autodetect/partition/format/populate the USB disk in a single step without any

This patch fixes ISOLINUX/SYSLINUX when using the kernel mem= option with a value greater than the effective memory on the system. At present, in this condition the kernel doesn't boot correctly. The default Linux behaviour (verified on 2.4.22) is to ignore this option if the BIOS reports less memory than the value manually specified. This patch force the same behaviour for ISOLINUX/SYSLINUX.

Hello! I need to extract audio data at a certain position in respect to the original audio data. Is the "-cbr" switch meant to ensure that data can be found on a specific position? I want to be able to predict where certain audio can be found in the encoded data. An example: If you put 10 apples into a box and then compress the box, you will not be able to predict where apple C

Is there a function that will allow me to run all model iterations if I specify a full model? I am using information criteria to choose between possible candidate models. I have been writing out all possible model combinations by hand, and I am always worried that I am missing models or have made a mistake somewhere. It is also difficult to alter models if I want to change a term. For example,

I just had two quick questions about opus. When using the encoder, how do I use a live microphone as the source, and how do I stream the output to a server? (Would it work with rtp, http, etc.?) Thanks! :) -- <>< Greg Bernard -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.xiph.org/pipermail/opus/attachments/20130807/5e6e57bd/attachment.htm

Quick summary: Syslinux stops at "Boot failed". Which, from a quick look at the raw disk image, seems to indicate that the boot sector loads but it fails to load the .sys loader. The details: I've been trying to load Linux (or etherboot...or anything at all that is not NT embedded) into a set of Compaq Evo T20 48/64 for a while now. What I finally managed to do is using the