similar to: Asterisk connected to TalkMaster from Digital Accoustics

Apparently Verizon is blocking or changing packets on port 5060 so my softphone from my hotspot will not work. How do I set asterisk (11.23.0) to run default 5060 for all other devices I have - BUT for my software run on a different port like 5070? I'm using linphone and is easy to change the ports from 5060 to 5070 ( I think). Thanks, Jerry -------------- next part -------------- An HTML

Using asterisk 1.4 with 100M or 1000M ethernet and 230 SIP clients and a 64 bit 4200+ box would there be any noticable lag or delay to bring each one of them into a PAGE mode. so one speaker can talk out on all 230 SIP clients for a message. Would this work? Thanks, Jerry

Hi all, I have setup my Cisco 79XX phone. Did the tftp, put the config files in the right location with the right names. Booted my phone, it does the tftp things, the screen shows my extensions everything seems fine. However, when I come offhook and try to dial 11 which is just a playback of demo-congrats in the dialplan the phone says Calling Out (INV) below is my sip.conf file - I presume it

I am sending an email from my machine devcentos5x64. the transcript below (hangs for 60 seconds) at the line: MAIL From:<root at devcentos5x64.msgnet.com> SIZE=56 AUTH=root at devcentos5x64.msgnet.com The email succeeds - but I am trying to figure out the 60 second delay. Neither email server is busy. Nothing is waiting. the DNS on both machines point to the same nameserver. The DNS

To continue here with problems on this compaq v2000 laptop, I put kernel source on a USB disk and plugged it into the v2000. NOTHING IS recognized. I tried to manually mount the disk and nothing either... I thought USB was well established.... I thought trying to recompile the kernel for realtek support might get my networking going... I am stuck??? Jerry -------------- next part

>>I'm not sure that your question is clear. You'll probably want to be more specific. >> What is pulse? You mention "as a user", are you talking about voicepulse.com ? >> What are you trying to do with pulse? >> What problem are you running into? Sorry Rusty... I am trying to get Asterisk 11 to co-exist with a centos 7 box that has pulse audio running as

I am trying to hwclock to set the time. (hwclock -w) this is what I get on standard 5.2 x86_64. hwclock --debug hwclock from util-linux-2.13-pre7 hwclock: Open of /dev/rtc failed, errno=19: No such device. No usable clock interface found. Cannot access the Hardware Clock via any known method. [root at devcentos5x64 src]# ls -l /dev/rtc crw------- 1 root root 10, 135 Feb 6 13:32 /dev/rtc Any

I am calling from a polycom phone into asterisk ( 1105 ) on a PC with a speaker attached. When asterisk first starts this works. In fact it works for some time. Then it just stops with this error on the CLI. [Apr 4 15:10:21] NOTICE[4357]: chan_sip.c:21358 handle_request_invite: Call from 'mndemo_to_mediaport105' to extension '1105' rejected because extension not found in

Hi all, when I do a "grep JERRY *.h" nothing is returned which is what I expect. This is in my source directory... when I do a "grep JERRY *" every file is returned an a line printed even though there is no JERRY on the line. Then if I do a "grep JERRY *.c" just the 4 lines that have JERRY are returned. This is what is prints for "grep JERRY *" src#

What is needed to get DAHDI to start up correctly on CentOS 7 and systemd... I am using DAHDI-linux-complete 2.11.1 I saw mention in my search that it has been fixed after 2.11.1 but cannot find what the fix is. Thanks, Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have been using 11.4.0 for some time. All was fine. I downloaded 11.5, extracted, run ./configure, make, make install. I got a message about res_rtp_asterisk.so was not compiled in the 11.5 Sure enough I have rss_rtp_asterisk.c but not .o file and no .so file. I then looked in the config.log and nothing is in there about res_rtp_asterisk What's up? jerry -------------- next part

I am trying to plug a USB 2 device in a USB 3 slot. Nothing is being detected in "lsusb". Is there something special I need to do? I am running centos 5.5 x86_64. I thought 3.0 was backward compatible. Nothing special about my device its an RS232 to USB device. It works in 2.0 slot. Thanks, Jerry

Does anyone know about sending SMS messages to a sprint pcs phone. Can you give me a few details. Thanks, Jerry

hi all, running centos 4.7 i686. I seem to have an o pen r elay sendmail server. How do I close it? I have the STRAIGHT centos install sendmail.mc file. Only thing I changed was: dnl DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl so as to allow incoming email and not just localhost. however this seems to relay everyone. I looked at http://www.sendmail.org/tips/relaying but it

I am trying to do an rsync or scp from machine1 to machine2. I am getting arg list to long. I am using centos 5 machine 1 and centos 4.5 on machine2. I am using the default shell which is bash. How can I get past this? THanks, Jerry

I have used WIP300, hitachi 5000 wireless phones on asterisk and have had good success. However, I am looking for a WIFI phone with integrated belt clip. Has anyone found any? I have tried after market clips and holders and those just don't work. THanks for sharing if someone has found something that works with asterisk. Jerry

I was just wondering if there are special tricks people do that compile A LOT on centos? Do RAM disks help or something else I dont about that minimizes your compile time? I presently have and AMD x2 4800+ with 2GIG ram. Just curious if I can reduce any more time out of my compiles. Jerry

I am wanting to use the mkfs.hfsplus as mentioned here http://www.oli.id.au/createosxdmgdiskimagesinlinux but I dont have the command. yum provides "*/mkfs.hfsplus" returns no packages found. Where do I find this command? Thanks. Jerry

Is there a cisco vpn client for linux centso 5 AMD 64 bit? Using google it talks about cisco vpn client but everyplace to download is blocked. I then found a vpnc reference but did not find a 64 bit version. yum install vpnc did nothing.... What is my next step? Jerry

I downloaded these 4 files: app_rxfax.c app_txfax.c asterisk.patch spandsp-20061130.tar.gz for use with asterisk 1.4 (these are the 1.4 files) I installed spandsp, copied app_rxfax and app_txfax into /asterisk-1.4beta3/apps my question is what do I do with asterisk.patch? I tried to put it in the apps directory also and run "patch < asterisk.patch" and it gave me an error.