similar to: ZFS Appliance as a general-purpose server question

Hello, Has anyone out there been able to qualify the Proliant DL360 G7 for your Solaris/OI/Nexenta environments? Any pros/cons/gotchas (vs. previous generation HP servers) would be greatly appreciated. Thanks in advance! -Anh

Hi all, We have a server with a LSI 9240-4i controller configured in JBOD with 4 SATA disks. Running FreeBSD 9.1-Beta1: Relevant dmesg: FreeBSD 9.1-BETA1 #0: Thu Jul 12 09:38:51 UTC 2012 root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 CPU: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz (3200.09-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x206a7 Family = 6 Model =

Hello everyone, This is not directly related to CentOS but still: we are trying to set up some storage servers to run under Linux - most likely CentOS. The storage volume would be in the range specified: 8-15 TB. Any recommendations as far as hardware? Thanks. Boris. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello I do have problem using Linux with an external HP tape drive. The server platform is also an HP Server; the server is an HP ML350 G4, and the Tape drive is a HP Storage Works Ultrium 448 - 1U Rack-mountable. HP Ultrium documentation says two drivers should be automatically up, sym53c8xx for LSI SCSI interface "st" for tape and /proc/scsi/scsi should contain information about

Hi everyone. We have a problem here... Hope somebody can give us some hints. We have a HP ProLiant DL180 G6 Server with a Debian/Lenny sytem. Asterisk 1.4.21.2 (1.4.21.2~dfsg-3+lenny1) with zaptel (1.4.11) and libpri (1.4.3) is installed. There is a QuadBRI-Card installed: # lspci -vv -s 06:04.0 06:04.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-4S] (rev 01)

Hi. I'm using GlusterFS v1.3.12 (glusterfs-1.3.12.tar.gz) via FUSE (fuse-2.7.3glfs10.tar.gz) on CentOS 5.2 x86_64 (Linux kernel 2.6.18-92.el5) now. The nodes are HP Proliant DL360 G5 (as GlusterFS Client) and DL180 G5 (as GlusterFS Servers). And the connections are all TCP/IP on Gigabit ethernet. Then, I tested self-heal and I found a technical problem about "replace" -- self-heal

Carlos: Te agradezco mucho tu rápida respuesta y mucho me apena haber planteado tan mal el problema. Porque la matriz en realidad es: g1 g2 g3 g4 g5 g6 g7 g1 0 18 13 16 11 12 15 g2 18 0 25 13 22 16 10 g3 13 25 0 28 23 13 25 g4 16 13 28 0 6 7 3 g5 11 22 23 6 0 18 17 g6 12 16 13 7 18 0 8 g7 15 10 25 3 17 8 0 Entonces cada cantidad debe conservar la pertenencia al grupo

I'm trying to sort a DATAFRAME by a column "ID" that contains alphanumeric data. Specifically,"ID" contains integers all preceeded by the character "g" as in: g1, g6, g3, g19, g100, g2, g39 I am using the following code: DATAFRAME=DATAFRAME[order(DATAFRAME1$ID),] and was hoping it would sort the dataframe by ID in the following manner g1, g2, g3, g6, g19,

-=- starting as new thread as it is off topic from controller thread -=- Ross Walker wrote: > > The real key is the controller though. Get one that can do hardware > RAID1/10, 5/50, 6/60, if it can do both SATA and SAS even better and > get a battery backed write-back cache, the bigger the better, 256MB > good, 512MB better, 1GB best. I've read a lot of different reports

Hi, i''am trying to build a Gentoo Dom0-kernel booting a HP DL380 G6. Has anyone twiddled a working kernel configuration for this hardware? i do have the linux-2.6.32-xen-r1 sources checked out by portage and tried some configurations. Olaf _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi, I just came across this box [0] (McKay Creek). Seems to be exceptional building material for ZFS based NAS/iSCSI unit. I especially liked the two extra system disks hidden inside the box ! Any one have an experience with these ? [0] http://www.intel.com/design/servers/storage/ssr212mc2 -- Regards, Cyril

Dear R helpers,   Following is a R script I am using to run the Fast Fourier Transform. The csv files has 10 columns with titles m1, m2, m3 .....m10.     When I use the following commands, I am getting the required results. The probelm is if there are 100 columns, it is not wise to define 100 commands as fk <- ONS$mk and so on. Thus, I need some guidance to write the loop for the STEP A and

Hi, I have HP DL 180 G6 2U Rack Server with HP Smart Array Controller Card B110i Onboard SATA Controller Chipset. This server has 4 * 500 GB SATA HDD have configured RAID 1+0 and it shows Single Logical Drive of 940 GB Hard Disk in the RAID BIOS. Have created driver diskette using dd command to enable this controller card to the CentOS 5.6 x86_64 arch and it shows HP LOGICAL VOLUME of size 940 GB

I have several systems running 64bit SLES11SP1. I''m trying to Live Migrate between a couple of them and it''s not working, although the same VM will run on each one starting it manually. The system are not identical. Would one expect migration to work between these two systems? See below. Thanks, James The first system is a ProLiant DL360 G6: Proc 1:2533 MHz Execution

Does the "legend" command work in the windows version of R? Here is the command that I'm using: legend(1,1,legend=c("G1","G2","G3","G4","G5","G6"),pch=array(1:6,dim=c (1,6))) When I use this on my existing graph in a window I get a solid black box at the lower left. If I use this with the postscript driver my output

Happy new year ! We have a SuperMicro server with a LSI MegaRAID 9260-4i controller. Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't initialize at boot. Reverting to kernel 2.6.32-431 allows server to boot fine. The server can't boot due to a bug in LSI megaraid module. Boot log ends by a lot of lines: RESET_GEN2: retry=xxx, hostdiag=a4 I tried Centos 6.6

Syslinux 3.85 is a bug fix and minor new feature release. The biggest change is undoubtedly that gPXELINUX is now considered feature complete, and should be able to be a drop-in for PXELINUX for all uses. Special thanks to Intel Corporation, my current employer, for their support for my Syslinux work. Changes in 3.85: * gPXELINUX: updated to gPXE 1.0.0. gPXELINUX can now do NBP

I have CentOS 6.x installed on a "HP ProLiant DL380 G5" server. It has eight 750GB drives in a hardware RAID6 array. Its acting as a host for a number of OpenVZ containers. Seems like every time I reboot this server which is not very often it sits for hours running a disk check or something on boot. The server is located 200+ miles away so its not very convenient to look at. Is

Thank you for your help. Le 05/01/2015 19:10, John R Pierce a ?crit : > works here fine on the 9261, which is an OEM version of the same card > with the connectors in a different orientation... you might check your > LSI firmware revision. My firmware seems to be more up to date. Anyway, I will try to update firmware. I have to check how to do that. # dmesg |grep LSI scsi4 : LSI SAS

Hello, When I run LLC with option "-O0 -march=sparc" on following testcase, fast register allocator crashes with "UNREACHABLE executed" error. LLC generates code successfully with other standard register allocators available. $ cat call.ll define void @test() nounwind { entry: %0 = tail call i32 (...)* @foo() nounwind tail call void (...)* @bar() nounwind ret void }