similar to: Powerware 5125 (USB) under Debian Squeeze.

Hello all, I have been having a problem with upsmon on Fedora 24 on boot. NUT is configured as a netclient to a Raspbian NUT server. After boot up upsmon repeatedly says "connect failed: No such host". It is not able to connect at all until the service is bounced. This seems to indicate a name resolution problem but shouldn't this auto correct once name resolution is working properly

I'm attempting to get a HP R1500 G2 UPS working with Solaris 10 connected via USB. Thanks to Arnaud's patch to drivers/tripplite-hid.c found at http://lists.alioth.debian.org/pipermail/nut-upsuser/2010-February/005887.html things mostly work. upsc ups01 shows a couple of things that don't look quite right. [....] battery.temperature: -234.1 [....] ups.alarm: No battery installed!

List: I have an Eaton (Powerware) Model 5115 and am using the bcmxcp_usb driver on a OpenBSD 4.9 system. The upsdrvctl start appears to work and I get a message in my daemon log stating that it successfully started. I can successfully start the upsd daemon. I get a successful start messaage from the upsmon program, but it soon complains of 'stale' data. It looks like the driver

Good evening, I tried getting this to work a couple years back but didn't have enough time to do all the debugging that was needed (apologies to the devs who tried to help at that time). It's working much better now, but I'm still not able to get an answer from upsc. Can anyone help me work out why I'm getting the error when querying with upsc: Error: Data stale My

Good evening, I tried getting this to work a couple years back but didn't have enough time to do all the debugging that was needed (apologies to the devs who tried to help at that time). It's working much better now, but I'm still not able to get an answer from upsc. Can anyone help me work out why I'm getting the error when querying with upsc: Error: Data stale My

Hi, I have set up a RaspberryPi computer to do monitoring of two UPSs. One is an MGE evolution 800, one is an Eaton Powerware 5110. The MGE was being monitored by another Linux (Ubuntu 12.04) computer, and I just copied and pasted in the relevant nut config and it works just fine with nut. I've tried to set up the Powerware 5110 with nut, and the bcmxcp_usb driver can't communicate

Hi All, I have a powerware UPS 5110 connected to an openindiana server with the bcmxcp_usb driver and running nut 2.65 compiled and installed as root to avoid permission issues. On running the following debug code to test the UPS's communication it fails at the same time with the following error. ./bcmxcp_usb -u root -DDD -a 5110 ....... 2.523879 get_answer: (128 bytes)

Hello, I 'm trying to set up an Eaton PW5110 using nut-2.4.1 in OpenBSD, my ups.conf follows : [myups] driver = bcmxcp_usb port = auto desc = "Eaton PW 5110 (1500VA)" My first attempt to run upsdrvctl ended up complaining about unimplemented usb_clear_halt() in libusb. I patched libusb-0.1.12 with the following patch :

Hello, Yes, "pollonly" is a driver option for certain devices (and relevant to just some drivers). Disconnects are probably relevant, at least to loss of connection (and staying that way, with less agressive retries in NUT v2.7.4 and before). There is a logged issue that "pollonly" mode might have trouble detecting a disconnection/staleness, I'm not sure there's merit

On Sat, 17 Sep 2016, Yevgeniy Kuksenko wrote: > Hello all, I have been having a problem with upsmon on Fedora 24 on boot. NUT is configured as a netclient to a Raspbian NUT server. After boot up upsmon > repeatedly says "connect failed: No such host". It is not able to connect at all until the service is bounced. This seems to indicate a name resolution > problem but

2010/10/18 Michael Eitelwein > Hi Arnaud > Hi Michael, > Yes, did test it without success. > can you please post the first 20 seconds running blazer_usb in debug mode, ie: $ sudo /lib/nut/blazer_usb -DDD -a cyberpower aside from fixing the megatec situation, ensuring that you'll be able to run the replacement is also to be considered ;-) now, for the megatec issue, we need

Hi, Does anyone know how to make NUT works with Powerware 5125? I already tried serial communication (genericups and bcmxcp) and USB (usbhid-ups and bcmxcp_usb), but without success. I'm using the latest version of NUT (2.6.5) under Debian amd64. Can anyone help me? Thanks. Daniel -------------- next part -------------- An HTML attachment was scrubbed... URL:

I'm trying to get a Powerware 5125 UPS running using the bcmxcp driver, but I get the following errors: video2:~# /sbin/upsdrvctl start Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.4) Communications with UPS lost: Error executing command Communications with UPS lost: Error executing command Communications with UPS lost: Error executing

corrupted checksums happen all the time with the 6-port serial card, even when only using one port (and I don't give a shit about the other ports, if anybody has a one-port laying around...) so stop whining already. $OpenBSD$ --- drivers/bcmxcp_ser.c.orig Wed Aug 23 11:15:54 2006 +++ drivers/bcmxcp_ser.c Wed Aug 23 11:26:37 2006 @@ -168,8 +168,8 @@ int get_answer(unsigned char *data, unsi

FYI @Arjen: anything else required? cheers, Arnaud ---------- Forwarded message ---------- From: MichaelE <662435 at bugs.launchpad.net> Date: 2010/10/20 Subject: [Bug 662435] Re: megatec_usb driver stopped working after upgrade from 8.04 to 10.04 To: aquette.dev at gmail.com I tested the shutdown behaviour and it works as expected. The UPS disconnected the load and then came back on

Hi Michael, thanks for your feedback! I'm cc'ing the NUT users list for info. I've also added an entry for your device (Powerwalker Line Interactive VI 1400, using blazer_usb). Can you please send back an upsc output, and at least check for the shutdown behavior, if not already done: http://new.networkupstools.org/user-manual.html#Testing_shutdowns 2010/10/19 MichaelE <662435 at

Hi there. At the moment I'm trying to get my HP T1500 XR (Powerware 5125) UPS to work with NUT. NUT registers that the UPS is on battery/online, but I just cant get the program to shut down the computer I'm using the original cable (thus I didn't enter anything in the ups.conf file) If I remove the cable and run the daemon/program the computer will shutdown after x minutes defined in

---------- Forwarded message ---------- From: Tim Dawson <tadawson at tpcsvc.com> Date: Thu, Feb 13, 2014 at 12:07 AM Subject: Re: [Nut-upsuser] Powerware (Eaton) Prestige 9 UPS To: Charles Lepple <clepple at gmail.com> Charles - As a quick followup, the Prestige (both FW 2.13 and 3.09 - 2.x is pre-Eaton, 3.x post) reply to the topology block query thus: 3.064046

Hello, On one hand, sorry to hear that higher polling frequency in upsmon did not help. On another, question is if the driver gets the info (online state and its changes) from device quickly enough. Initially I meant for you to also try if the "pollonly" flag (in each device section of ups.conf for usbhid-ups instances) would make a difference?.. I'd expect data-transfer interrupts

Is anyone besides me using gcc 4.*.*? I noticed that NUT generates an enormous amount of warning noise with that compiler, mostly due to implicit casts between signed/unsigned pointer types. Any volunteers to de-noise the code a bit? The easy way is to insert typecasts; the better way is to actually take care about signedness. -- Peter gcc -I../include -O -Wall -Wsign-compare -c -o everups.o