similar to: Illegal OpCode

Hi to all, from syslinux 4.06 and 5.00 pre 12 came the same dump. Background: While trying to install syslinux on small (700 MB) FAT16 Partition on HP Server got Red Screen of Death with a register dump. Illegal OpCode EAX=00001F01 EBX=000001A4 ECX=00000000 EDX=00000019F EBP=0000FBFA ESI=000007BE EDI=00000800 DS=0000 ES=0000 FS=0000 GS=0000 CS:EIP=0000:000083A6 SS:ESP=1000:0000AFF6

Using the latest version of syslinux/pxelinux.. When cold pxe booting a HP DL585 G2 (Broadcom NIC), if the pxemenu item is LOCALBOOT 0 and is selected, then a red screen with the following error occurs: Illegal OpCode EAX=000E09AC EBX=00000000 ECX=00000000 EDX=00000000 EBP=00004408 ESI=0000F000 EDI=000045E9 DS=F000 ES=0000 FS=0000 GS=0003 CS:EIP=1000:00000240

When running test 5 in Memtest86+ v1.65, I got a "this opcode is not supported", so I decided to add it. It''s a compare operation, and it''s just the opposite of the already supported one (opcode 0x39), so it''s nothing spectacular. Why there''s a page-fault when this instruction gets executed, I haven''t got a clue, but I have a feeling that

Hello, I have lots of the following entries in my log: nmbd[1605]: [2010/05/28 09:59:51, 0] nmbd/nmbd_packets.c:validate_nmb_packet(1375) nmbd[1605]: validate_nmb_packet: Bad REG/REFRESH Packet. validate_nmb_packet: Ignoring request packet with opcode 5. What does this mean exactly? Can I ignore this? I use samba (sernet-samba) 3.3.12-25 on Debian Lenny. Thanks and Regards. Henry

Hello, I have an issue with ebtables --arp-opcode and vlan support on the bridge. Ebtables support --arp-opcode witch is used for arp manipulation. ebtables -t nat -A PREROUTING -p arp --arp-opcode Request -j arpreply --arpreply-mac 10:11:12:13:14:15 --arpreply-target ACCEPT -i eth1 But it does not work when Ethernet frame comes tag with vlan pid. Can i overcome this limitation? Fanks

Currently the mmio_operands assumes writing to memory when operand 0 is register or immediate, this is false for cmp/test opcode. This patch resolve this problem, please review. Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Jun Nakajima <jun.nakajima@intel.com> Thanks Yunhong Jiang _______________________________________________ Xen-devel mailing list

Your message dated Sat, 10 Dec 2011 20:00:59 +0100 with message-id <20111210190059.GG15557 at wavehammer.waldi.eu.org> and subject line no bug has caused the Debian Bug report #649141, regarding xen-hypervisor-4.0-amd64: live migration fails with invalid opcode due to nonstop_tsc to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it

On Thu, Feb 13, 2014 at 2:15 AM, Kui Zhang <kuizhang at gmail.com> wrote: > Hello, > > When CONFIG_DRM_NOUVEAU=y, I get following error. Blank screen after initrd. > > This was in the dmesg. > > [ 0.282559] [drm] hdmi device not found 1 0 1 > [ 0.282688] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x046800a3 > [ 0.282693] nouveau [ DEVICE][0000:01:00.0]

Hi, while testing syslinux-6.01_pre6 and syslinux-6.02_pre5 I noticed an illegal OpCode error on PXE exit. To reproduce: 1) Install syslinux-6.0x PXE environment 2) Use a config like I use (seems like this is getting triggered when the local boot menu entry will be executed) -> http://pastebin.com/raw.php?i=6tjqUAwX 3) Just let a client boot from network. It will hit timeout and the default

On Fri, 19 Jul, at 02:34:04PM, Igor Sverkos wrote: > Hi, > > while testing syslinux-6.01_pre6 and syslinux-6.02_pre5 I noticed an > illegal OpCode error on PXE exit. Urgh, not good. Do you see the same error with 5.11-pre8? -- Matt Fleming, Intel Open Source Technology Center

Hi, > Do you see the same error with 5.11-pre8? Yes, I do :( -- Regards, Igor

Hi, > Have you ever successfully used this config file with 4.06 or earlier? Mh, no. And I'll get the illegal opcode on 4.06 exit for local boot as well. Not sure if it has something to do with the fact, that there is no local bootloader, syslinux can start (it is a new system where's currently no OS installed). The config itself was grabbed from various PXE boot tutorials, for

Does anyBody know how to know the latency of every opcode in llvm-IR? Thank you for your time! 2010-10-14 huwei8717 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20101014/a9c4b540/attachment.html>

I'm doing some tests running llvm on Android. I'm getting an error message saying: Unhandled instruction encoding format! I checked which instruction was causing this and it is ADDrsi, it appears to have format 42 << 7, which is definitely not available in ARMBaseInfo.h Any suggestions are welcome -- Guillermo A. Pérez (吉耶莫) -------------- next part -------------- An HTML

Hi, Given the following in ISDOpcodes.h SETO, // 0 1 1 1 True if ordered (no nans) SETUO, // 1 0 0 0 True if unordered: isnan(X) | isnan(Y) Is it safe to assume that SETO is not of SETUO? We have support for setuo in the architecture but not seto. Sirish -------------- next part -------------- An HTML attachment was scrubbed...

----- Original Message ----- > From: "reed kotler" <rkotler at mips.com> > To: llvmdev at cs.uiuc.edu > Sent: Wednesday, February 13, 2013 6:00:45 PM > Subject: [LLVMdev] changing opcode > > Is there a simple way to just change the opcode of a machine > instruction. > > I have a lot of long/short pairs where when I know the offset, i can > replace

On Wed, Feb 13, 2013 at 7:00 PM, reed kotler <rkotler at mips.com> wrote: > Is there a simple way to just change the opcode of a machine instruction. > > I have a lot of long/short pairs where when I know the offset, i can > replace the long version with the short version. > Hey Reed, The x86 target does something like this. Check out ReplaceableInstrs

Hi Everyone, I compiled a program using Wine and made an executable that works (nice job ya'll!). However, when I first tested it I was on a remote X Server and right now I'm limited to working a 486SX laptop where the XServer is local as are the clients and with this setup I'm experiencing problems. When I try to run these graphic programs (the CLI programs seem to work fine), I

As seen in at least one NV134 VBIOS (... that I obviously don't own myself). Signed-off-by: Roy Spliet <nouveau at spliet.org> --- drivers/gpu/drm/nouveau/nvkm/subdev/bios/init.c | 27 +++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/init.c b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/init.c index 38ed09f..a18f8b4 100644

Hello. I got an error and have no idea how to fix it, or workaround it. dsync-local(mymail at mymail.org)<PR2hBB86zV52SQAACjx0Gw>: Panic: file hash.c: line 251 (hash_table_insert_node): assertion failed: (opcode == HASH_TABLE_OP_UPDATE) dsync-local(mymail at mymail.org)<PR2hBB86zV52SQAACjx0Gw>: Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(backtrace_append+0x3d)