similar to: mdX and mismatch_cnt when building an array

this has never happened to me before, and I'm somewhat at a loss. got a email from the cron thing... /etc/cron.weekly/99-raid-check: WARNING: mismatch_cnt is not 0 on /dev/md10 WARNING: mismatch_cnt is not 0 on /dev/md11 ok, md10 and md11 are each raid1's made from 2 x 72GB scsi drives, on a dell 2850 or something dual single-core 3ghz server. these two md's are in

Saturday I did an upgrade from 5.3 (original install) to 5.4. Saturday night, /etc/cron.weekly reported the following: /etc/cron.weekly/99-raid-check: WARNING: mismatch_cnt is not 0 on /dev/md0 md0 holds /boot and resides, mirrored, on sda1 and sdb1. md1 holds an LVM volume containing the remaining filesytems, including swap. The underlying hardware is just a few months hold,

hi, it's been a few weeks since rhel/centos 5.4 released and there were many discussion about this new "feature" the weekly raid partition check. we've got a lot's of server with raid1 system and i already try to configure them not to send these messages, but i'm not able ie. i already add to the SKIP_DEVS all of my swap partitions (since i read it on linux-kernel list

Hi again! I would like to add an ext3 partition (eg. /dev/md11) with its external journal (on /dev/md21) to /etc/fstab in order to have it mounted while system-startup. Do I have to specify the external journal device in fstab or does the partition find its journal device by itself? If the first, ho should I specify it? I created the journal with mke2fs /dev/md22 -O journal_dev and the ext3

Just to make sure somebody reacts (please) I'm forwarding this. Please cc me on replies as I'm not subscribed to this list. -------- Original Message -------- Subject: [RESEND] 2.4.20: ext3: Assertion failure in journal_forget()/Oops on another system Date: Wed, 04 Dec 2002 21:27:31 +0100 From: Andreas Steinmetz <ast@domdv.de> To: Linux Kernel Mailing List

I''ve gone over the documentation several times now and I can''t figure out how to ''apply'' a manifest to a client. The client does have a signed certificate but the only thing in the /etc/puppet folder on the client is an ssl directory. I have a manifest that works fine on the puppet ''master'' I have added the client into

I have two domain controllers running ubuntu (12.04 and 13.10) both with samba (4.1.6 and 4.1.7) installed and running (and with sssd on both machines to retrieve uid/gid from AD). I wish to set a share on ubuntu2 in the way so it could be accessible only from ubuntu1 (and by any user from ubuntu1, for instance by local root). I have found this solution though I'm not sure it solves my issue:

Here is what I got. root ubuntu:/home/john# virsh start ubuntu2 error: Failed to start domain ubuntu2 error: internal error Process exited while reading console log output: char device redirected to /dev/pts/1 bind(unix:/var/lib/libvirt/qemu/ubuntu2.libguestfs): Permission denied chardev: opening backend "socket" failed: Permission denied root ubuntu:/home/john# ll

Thanks again Keith. I disabled UFW and flushed iptables completely, but same result. Pings from the external node are reaching the internal node on the tinc0 interface but nothing happens after that. Now that I'm thinking of it, I did some masquerading in order to get OpenVPN to work on another box, I wonder if that would be applicable here? Very Respectfully, Kismet Agbasi

Hi LLVM, If I have an llvm value "<16 x float> addrspace(1)* %in", and in the LLVM IR, there is a @llvm.dbg.value like: call void @llvm.dbg.value(metadata <16 x float> addrspace(1)* %in, i64 0, metadata !216, metadata !28), !dbg !217 How I can retrieve this @llvm.dbg.value when I have "%in"? Since Metadata is not a part of the uselist anymore, is there some way

Hello, I added a new disk into our RAID5 array, it looks like this: md2 : active raid5 sdd4[3] sde4[4] sda4[0] sdc4[2] sdb4[1] 3767274240 blocks level 5, 64k chunk, algorithm 2 [5/5] [UUUUU] # btrfs fi sh Label: none uuid: 5534d2e7-be31-49c7-8ab7-90c5ab8afe18 Total devices 1 FS bytes used 2.24TB devid 3 size 2.63TB used 2.63TB path /dev/md2 # mount ... /dev/md2 on /home type btrfs

ok, i'm NO expert but I can learn a LOT of things. I have used wine very sparingly in the past, enough to know that IE, outlook and a few other "Win Only" apps will run. So when wine 1.9 was released i figure i HAD to have it. but BOY its a lot different. Installation was smooth, MDV rpms work as expected, but thats where it ends. I use the same IE5.5 install source I have used

Thanks Keith. Here's the output: root at ubuntu2:~# iptables -vnL FORWARD Chain FORWARD (policy ACCEPT 745 packets, 47680 bytes) pkts bytes target prot opt in out source destination 6299 416K ufw-before-logging-forward all -- * * 0.0.0.0/0 0.0.0.0/0 6299 416K ufw-before-forward all -- * * 0.0.0.0/0

hi smbusers, would like to ask some questions about posix acls and reiserfs.help and info is much appreciated.(to make it clear i am running mandriva 2007 free edition with samba 3.0.23d installed.) 1. is acl supported now on reiserfs filesystems by default? 2. do i have to recompile the kernel and apply the acl patch? (i currently have the 2.6.17 kernel) 3.which is best for samba?xfs?ext3? or

Hi I am having some problems running a covariate analysis with my colleage using R with the NonMem program we are using for a graduate school project. R and NonMem run fine without adding in the covariates, but the program is giving us a problem when the covariate analysis is added. We think the problem is with the R code to run the covariate data analysis. We have the control stream, R code

Keith, Thanks for the reply and the pointers. > Did you remember to activate kernel ip forwarding? > i.e. echo 1 > /proc/sys/net/ipv4/ip_forward ? I actually forgot to do this, but I have enabled it now in /etc/systctl.conf and can confirm now after a reboot that it's enabled. Unfortunately, still can't ping the node on the LAN. > and when I saw that I was about to cancel

Does software raid 1 compare checksums or otherwise verify that the same bits are coming from both disks during reads? What I'm interested in, is whether bit errors that were somehow undetected by the hardware would be detected by the raid 1 software. Thanks, Nataraj

I am going to present Linux to my ham radio club at some point in the next few months, and wanted to collect info on ham radio software, including options for echolink. Our repeater has an echolink connection, thus if I present the software available for it, it might perk up people's interests more. It would also be very helpful if the echlink applications offered proxy/firewall options

Sorry, i send again this message because i m not sure it was realy sent the first time Hi i use samba server with winxp box on our lan from 3 years and before i can "upload" the xp drivers from a xp machine to samba server without any problem's but recently after un hard disk crash, i upgrade my mandriva server to the last release mdv (2006.0) and now i wasn t able to upload

Hello, I tried to install Mapsource 6 in Wine (20050211.2) on MDK LE2005 but it didn't install... The same with GIDroute which installed but didn't want to be launched. I will give it a try on MDV 2006 but I don't expect a miracle. And the pseudo map applications for Linux are not really what we can consider as useful and easy to handle with... Ciao @+ CWO4 Dave Mann wrote: >