similar to: Re-sizing qcow2 images

Dear List , We are using intel 82599EB based SRIOV capable 10GbE cards on the host machine.The VFs are being assigned to the guest in pass through mode and are providing the network connectivity as expected. However when we shutdown the guest the connectivity does not comes back via the VFs on the guest in next boot unless the VFs are detached from the *guest* *before* initiating a shutdown of

Thanks for Remko for his help to solve the fractional cylinder problem. But there is the second problem, the boot disk failure (see below << [B]) ... command line: initrd=disk.img harddisk c=2 h=256 s=63 BOOT_IMAGE=memdisk Disk is hard disk, 16128K CHS=2/256/63 <<<< [A] ... Loading boot sector... booting... SYSLINUX 2.04 welcome! boot: 1 [single dot]

All, I am trying to use virt-convert to convert a KVM/libvirt guest to VMWare ESX 4, and getting an error. Any help would be greatly appreciated. I have created a virt-image image file as shown at http://people.redhat.com/dlutter/virt-image/virt-image-xml.html. See below for the xml file. I am using the following command for the conversion, and am getting the error shown :

Hi, I'm currently working through Sander Van Vugt's "Beginning the Linux Command Line" (Apress), just for fun. Right now I'm just trying out all the examples in chapter 5, dedicated to managing partitions and logical volumes. After some work with fdisk (which I normally use), the book introduces cfdisk (which I've been using in Slackware days). Curiously enough,

All, I need to run a number of guests which user older distributions of RHEL and CentOS on an RHEL 6.3 host. The versions are; 4.8 - i386 5.1 - i386 5.2 - x86_64 5.3 - i386 Currently I am running these with the E1000 network driver and the IDE driver. Where can I find kernels (or modules) for virtio for these OS's ? Thanks in advance Chandana

Hi, The title says it all. One of my clients showed me a 120 GB hard drive that his daughter accidentally formatted, according to him. I booted the first CD I had at hand - a Slackware 11.0 install CD - and launched cdfdisk /dev/hda. cfdisk informed me that there was even no partition table. So much for reformatting. cfdisk only shows me 120 GB of free space. Any way to retrive data on this

Hi, What would you recommend as an FS for an partition greater than 16 TiB? This is for an production server (that is, no ext4 recommendations please :) ) What experiences did you had with your preferred FS ? (good and not so good points) Thank you, Adrian -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 3105

How I can change AGI script return status to failure from within the script? It always return AGI Script ........ completed, returning 0 Thanks, Hristo -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090515/462d5dc3/attachment.htm

Hello, I'm trying to calculate a certain distance estimator for my thesis. I have a program in C that works fine when I call it with .C() in R, but since I'm dealing with big matrices like 30000x20000 it was getting a stack overflow. Now I have the same program but more efficeintly coded using malloc, and it works perfectlry in C, compiles well with R CMD SHLIB but when I call it with

Hello After conducting a simulation R closes down reporting the problem I have listed below. These are extracted from the event viewer option under the control panel option in windows. This problem occurs quite often but is as far as I can tell fairly sparadic. I can run identicle programs which run successfully the first time but on the second run it does not (and vise-versa also).

Hello, I am curious why when using virt-sparsify the apparent-size of the file gets reduced to the actual file size? Is there a way to get the apparent-size left as the full size? In the man page for virt-sparsify it has a section on "IMPORTANT NOTE ABOUT SPARSE OUTPUT IMAGES" and its output seems to indicate what I would expect where "ls -lh" shows the full apparent size

Hello, I am curious why when using virt-sparsify the apparent-size of the file gets reduced to the actual file size? Is there a way to get the apparent-size left as the full size? In the man page for virt-sparsify it has a section on "IMPORTANT NOTE ABOUT SPARSE OUTPUT IMAGES" and its output seems to indicate what I would expect where "ls -lh" shows the full apparent size

Hi there, I'm trying to migrate a domain between two Gentoo hosts using KVM as hypervisor, but the migration hangs. I tried both live or offline migration modes without success. Details below. Anyone has an idea of what could be wrong with my setup? The migration is the only thing not working. Host A (initially running the VM) ================================= # uname -a Linux pion

I finally have a xen server to play with stuff that''s causing me problems on my production servers. One of those problems is simply installing Windows 2003. Here''s what I do: Open virt-manager set up a new install: full virt 512 ram 20 gig sparse file boot off /dev/cdrom The install starts as you''d expect. When it gets to the formatting I tell it to format in NTFS.

Hi, I am using asterisk 1.8.22 and have a problem when calling in parallel several SIP endpoints and I am not sure how to resolve it. In this case Asterisk will not bridge any audio to the caller before the 200 OK. Which means any progress announcements, including remotely generated ringback, are not passed back to the caller. This behavior is completely correct, because there is no way to know

Hi, In log I get: ----------------------------------------------------------- Sep 30 16:19:03 host kernel: Shorewall:FORWARD:REJECT:IN=eth0 OUT=eth0 SRC=ip1 DST=ip2 LEN=48 TOS=0x00 PREC=0x00 TTL=118 ID=27279 DF PROTO=TCP SPT=51501 DPT=25 WINDOW=8192 RES=0x00 SYN URGP=0 ---------------------------------------------------------- Even in /etc/shorewall/rules I have

Hi, I want to configure * to use a gatekeeper for routing calls to H.323 endpoints. I imagine it will work like that: * (chan_h323) will query the gatekeeper where to terminate the dialed number and the gatekeeper will return the information for the h.323 gateway. after that chan_h323 will try to make the call to the gateway it has received from the gatekeeper. so instead of duplicating a

https://bugs.freedesktop.org/show_bug.cgi?id=57660 Priority: medium Bug ID: 57660 Assignee: nouveau at lists.freedesktop.org Summary: nv?? show error nv??_screen_get_param:??? - unknown PIPE_CAP 76 Severity: normal Classification: Unclassified OS: Linux (All) Reporter: mustrumr97 at gmail.com

Hello folks, i do not get access to a physical disk with xen. I would like to install windows xp as hvm to the physical partition /dev/sdb1. I partioned the disk with cfdisk. Filesystem type is Linux (83). In my eyes the filesystem using hvm is insignificant(?). I tried the following configurations; probably a lot more than this. #disk = [ ''phy:hda1,hda1,r'' ] (comment from

This may not be the best forum to ask, but it does seem to be one where it is as likely as anywhere that someone will have dealt with a similar problem. I need to define a procedure for last resort disaster recovery from an incremental file level backup of the root partition (and any others that are critical.) Now it is easy enough to create a raw virtual disk with dd, then to losetup and do a