similar to: 8139 dropping packets

Hello list, I have network problems on dom0 I discovered this trying to copy user''s homes from another box onto dom0. I have tried this via mouting tcp nfs and also via ftp. Both methods give me the same problem. When I try to send lots of continuos traffic the tcp connection bottoms out. I get this on dom0 peth0 transmit timed out, tx_status 00 status e000 diagnostic: net 04cc media

Hi Yum has just updated 5 of my Linux boxes running CentOS 4.3 to the 2.6.9-42 kernel. All is well on four of the boxes, but on the fifth the network card (eth0) will not work. I've downgraded the kernel to the previous version and the network card works fine again. I've tried removing and re-installing the new kernel, but the network card won't work with it. The details of the

Hello all, Not sure if I am completely missing something but here goes. I have XCP 1.0 running without any issues. I have the mtu set on both the storage network, the corresponding PIF, and the VIF to 9000 and when displayed in ifconfig it shows that this is indeed true. I have several CentOs 5.6 VMs running in HVM mode (i.e. no xen kernel) which attach to the the storage network through these

Hi all, i have a question. I''m going to setup a Xen server for a client. It''s going to serve about 25 clients. It''s a Athlon 64 3200+, which currently runs Debian i386-stable and xen 2.0.7 until Xen 3.0 is stable enough, and then i''m gonna replace it with Debian amd64-stable and Xen 3.0. The Xen dom''s consists of: Samba , file printer sharing most

I have a hardware here with 9 NICs (8 of them on-board) and I want to set up 8 NICs as real network interfaces, one for each xen domain. The 9th NIC should be Domain-0 which is working well. Currently I have only set up one domain which is running in bridged mode at the moment. I am currently trying to set up a second domain which uses eth2 but I didn''t succeed. I want to get the

hi, i need eth1 for an adsl connection via rp-pppoe (pppd). I was able to hide eth1 in Dom0, but how i use this device in DomU? Do i have to load the 8139too modul, to have eth1 in DomU? cu denny -- Sicherheit verständlich http://www.sides.de GnuPG Key http://pgp.upb.de:11371/pks/lookup?op=get&search=0xAB7D3FE0 _______________________________________________ Xen-users mailing list

Anyone else seen this eth-device and what brings it up? [root at oh1mrr etc]# ifconfig __tmp1192348344 Link encap:Ethernet HWaddr 52:54:AB:DD:2E:D1 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2094689 errors:0 dropped:0 overruns:0 frame:0 TX packets:1645734 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX

I am facing a problem with Apache on CentOS 6 Apache 2.2.19 is complied from source. I see so many reading requests in Apache status page, as per my previous experience this "reading request" issue mainly comes when any of the internet route having any problem and it request takes time to completely reach to Apache, but this time there is no network issue. I have ran same setup on

Hi, I am having periodic sound clicks (2-3 per second) on all FXS of a TDM400P when the remote end is my VoIP provider. However: - recording the conversation on the asterisk, does not have the glitches, although I can hear them on a real phone. - My VoIP provider to my VoIP phones through the same asterisk is OK. - TDM to TDM through the same asterisk is OK. I tried with and without

I am experiencing poor network performance on Dom0. When i ping other hosts on the same LAN, packets are out of order, and they show response times ranging from < 1 ms to several seconds, and some packets get lost. For example, a typical ping result looks like this: 87 packets transmitted, 80 received, +3 errors, 8% packet loss, time 86038ms rtt min/avg/max/mdev =

Hello, I have this problem - I have installation of Xen and Centos 5 (all RPMs are from Centos repositories). I have several DomU virtual machines running on this machine. When I try to copy some bigger amount of data from another physical computer to Dom0/DomU on this machine, the network freezes. The link is still up, I can see that the connection really links on the switch, but nothing is

Hello list I'm trying to setup fail2ban specially sasl action but I'm facing problems. I have centos-release-5-9.el5.centos.1 and fail2ban-0.8.7.1-1.el5.rf installed with selinux disabled The errors I get are: INFO Creating new jail 'sasl-iptables' fail2ban.comm : WARNING Invalid command: ['add', 'sasl-iptables', 'polling'] I tried gemin against

Windows 2k8 R2 guest with updated virtio drivers is idle inside but on the host qemu-kvm process uses 7-15% cpu. Things that have been tried without any significant success - removed tablet device - manually set cpu topology for cores per socket Is it just me or the qemu-kvm has little tolerance with windows?

Windows 2k8 R2 guest with updated virtio drivers is idle inside but on the host qemu-kvm process uses 7-15% cpu. Things that have been tried without any significant success - removed tablet device - manually set cpu topology for cores per socket Is it just me or the qemu-kvm has little tolerance with windows?

Hi All, Trying to run fsck on a local linux raid partition gave the following. [root at ... /]# fsck.ext4 /dev/md0 e2fsck 1.41.12 (17-May-2010) /dev/md0 has unsupported feature(s): 64bit e2fsck: Get a newer version of e2fsck! Odd as the server is 64bit running latest kernel and using latest "e2fsprogs.x86_64". Any ideas awould be much appreciated. Cheers Steve k

Hi, I know I can create a file and mount it like this: dd if=/dev/zero of=/tmp/somefile bs=1024 count=100000 mke2fs /tmp/somefile mount /tmp/somefile /mnt -o loop but that has a problem it cannot grow. Is there a way to do the same (above) but have it not restricted to a size? Or can I append blocks to the end of the file without distroying it? Jobst -- Sendmail administration

To those of you who may be interested, to get SATA drives to work on this motherboard with Xen 3.3.1 (compiled from source) you need to set SATA to RAID mode in the BIOS, not the default IDE mode. So I can only assume that the 2.6.18.8 kernel has a problem with the VIA SATA in IDE mode, and can''t recognise it, even though the host OS (Ubuntu 8.04LTS, in my case) has no problems with it.

host and guest both centos 5.5 network is 192.168.62.40 host is setup as follows [root at cloud2 ~]# ifconfig br0 Link encap:Ethernet HWaddr 00:1A:64:12:10:D9 inet addr:192.168.62.199 Bcast:192.168.63.255 Mask:255.255.254.0 inet6 addr: fe80::21a:64ff:fe12:10d9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1705488

Hi all, I have a test lab installed over an ESXi 5.1 host that contains 5 CentOS vm guests. I would like to monitor CPU, RAM and Network for these vm and ESXi host. Zabbix and Nagios are too to accomplish this task. Does anyone know any lightweight openosurce soft to do this?? Thanks.

When I use my phone to make VOIP call and another calls comes from POTS my phone rings to POTS caller. Why? Shouldn't it generate busy signal! -- #Joseph