similar to: NUT 2.6.3, openSUSE 12.2 : UPS unit not switched off

Hi, I have Xen 3.3.1 running with 2.6.18 kernel and Fedora . In dom0 when I run cat /proc/interrupts I got the following output: CPU0 CPU1 CPU2 CPU3 9: 0 0 0 0 Phys-irq acpi 16: 62087 0 247 0 Phys-irq libata, uhci_h cd:usb5, uhci_hcd:usb7 17: 2 0 0

Hello All, I'm trying to establish a MASTER SLAVE configuration of UPS using NUT Driver. I'm able to shutdown the master after UPS is on BATTERY ( POWER BLACKOUT) .However I'm trying to shutdown the other SLAVE MACHINES BEFORE MASTER. But at the remote side ( Slaves ) shutdown after UPS blackout does not happen. My configuration in Master are /usr/etc/upsd.users

On Thu, 14 Jul 2016, Dmitri Stepanov wrote: > Some of those hosts haven't NUT including upsmon (and other software > which is not included by suppliers of the hosts) for a number of > reasons. I don't need to inform not-NUT hosts about any UPS events, > etc... but only shutdown all the hosts after upssched timer expired. So > I think shutdown them via ssh would be

On Tue, 29 Sep 2020, João Luis Meloni Assirati wrote: > The UPS I am developing a driver to is able to report several flags for > critical hardware conditions, like overheat, overload, inverter failure, > output short etc. What should be the correct policy of operation when such a > condition occurs? I think that the an UPS in such a condition is not reliable > and therefore a

On 9/16/08 3:35 PM, "Arjen de Korte" <nut+users at de-korte.org> wrote: > Citeren tarbeite <tarbeite at fit.edu>: > >> Running opensuse 11 with two ups that can be seen via web interface and post >> messages on the console. > > Please post the contents of /etc/ups/upssched.conf here. Also make > sure that the directory mentioned in PIPEFN and

Hi all I?m not sure if this is the right place to post but I?m at wits end. So here we go. Running opensuse 11 with two ups that can be seen via web interface and post messages on the console. My issue lies in trying to get the upssched and upsmon to work correctly. Currently I have the exec flags denoted in the upsmon and ?NOTIFYCMD /usr/sbin/upssched? is specified as the NOTIFYCMD flag as

> On 9 Jun 2019, at 21:19, Roger Price <roger at rogerprice.org> wrote: > Using upssched and a upssched-cmd script to shut down the system is an alternative to using the builtin upsmon SHUTDOWNCMD on status [OB LB]. A upssched-cmd script can provide a managed shutdown well before [OB LB] is reached, but should the UPS reach that status upsmon's SHUTDOWNCMD will take over and

Does the github link not come through (https://github.com/networkupstools/nut/issues/799)? All the documentation that Tripp-Lite sent me on the 2012 protocol and my configuration files are on that issue. I doubt this mailing list will allow me to attach any files. It's the NUT github page. At any rate ups.conf just has this in it. No offdelay or ondelay entries: [ups] driver =

Dear List, I thought it might be useful if I wrote up my notes on getting an MGE UPS to work with NUT and openSUSE. The MGE UPS (an Ellipse 1500 USB) will work well with NUT and openSUSE 10.2, but not "out-of-the-box": there are some things you need to do: Intro. MGE have built rpms of NUT which greatly simplify installation. Merci MGE. I used the rpm's for nut-2.0.5 and the

Good Day Roger Price AA. Hi, Normally one would expect the UPS to disconnect it's power outlets after the default ups.delay.shutdown = 20 seconds. ==> I got it. I tried to command "upsdrvctl shutdown" on both line-mode and battery-mode ==> But ups do not disconnect its outlets power ----------------------------------------------------------------------------------- BB.

Here is the previous email that I sent directly to Charles Lepple. ?I am now sending to the correct email with cc to Charles. ---------------- I am looking at, and trying to understand the rest of the conf files. ?But first want to askabout something from this message:[CODE]root at debian:/home/john# upsdrvctl startNetwork UPS Tools - UPS driver controller 2.7.2Network UPS Tools - Megatec/Q1

Stanislav Brabec wrote: > Please note that 2.2.2-pre3 installs hald addons by default to / on > openSUSE 11.0 beta 2 x86_64. Not a big problem. Here is a patch, which fixes openSUSE 11.0 beta 2 x86_64: --- m4/nut_check_libhal.m4 +++ m4/nut_check_libhal.m4 @@ -63,7 +63,7 @@ dnl As per HAL spec, ?5 Callouts and ?2 Device Information Files dnl - addon install path: $libdir/hal

Well it is the season for storms and power outages here in the US PNW. I noticed that today when the power went out, NUT mostly did what I hoped/wanted. But it did not actually turn off the UPS at all. The UPS kept beeping and I had to turn it off manually. I thought that NUT would handle this. But perhaps it cannot for my unit? Or perhaps I have things improperly configured? Any suggestions?

HI in centos: C="/usr/bin/upssched-cmd" here is the output of that file: # more /tmp/NUT.report NUT configuration 2016-05-10 03:02:20 UTC ########### /etc/ups/nut.conf ########### MODE=netserver ########### /etc/ups/ups.conf ########### [cyberpower] #driver = powerpanel #port = auto driver = usbhid-ups port = auto vendorid = 0764 desc = " My main

Thank you for answer Stuart >?????, 13 ???? 2016, 17:54 +03:00 ?? Stuart Gathman <stuart at gathman.org>: > >On 07/13/2016 10:02 AM, Stuart Gathman wrote: >> On 07/13/2016 04:17 AM, Dmitri Stepanov wrote: >>> I need to shutdown a number of hosts which has not NUT from one which has it. >> Let's make sure you are not missing an obvious point. By

On Tue, 31 Dec 2019, David White wrote: > ... But it did not actually turn off the UPS at all. The UPS kept > beeping and I had to turn it off manually. > > I thought that NUT would handle this. But perhaps it cannot for my unit? Or > perhaps I have things improperly configured? Any suggestions? Thanks and > happy new year! > ########### /etc/nut/upsmon.conf

On Mon, 15 May 2017, Dinow Hsieh wrote: > ==> I have tried this command "upsdrvctl shutdown" as below results (However the UPS still sustain the power) > > ??? Network UPS Tools - UPS driver controller 2.7.1 > ??? Network UPS Tools - Generic HID driver 0.38 (2.7.1) > ??? USB communication driver 0.32 > ??? Using subdriver : PowerCOM HID 0.4 > ??? Initiating UPS

On Sun, 9 Jun 2019, Joe Gervasio wrote: > This question undermines my reading of the documentation.  I had thought that > these were separate things:  > >     SHUTDOWNCMD "/sbin/shutdown -u -h +1"  >     NOTIFYCMD /opt/local/sbin/upssched > > I had assumed that the SHUTDOWNCMD would be used by the Nut client (upsmon) to > shutdown the slave system,  and that

I have been looking closely at using NUT with openSUSE 13.2. Here is a quick summary. 1. Like the alien plant in the Quatermass Experiment, systemd is reaching into every corner of the distribution. New systemd service units exist in /usr/lib/systemd/system: Power devices information server, nut-server.service, starts upsd Power devices monitor and shutdown controller, nut-monitor.service,

On Mon, 9 May 2016, Min Wang wrote: > HIin centos: C="/usr/bin/upssched-cmd"? Noted, thanks. > here is the output of that file: > > ? ? ? ? ########### ps aux ########### > nut ? ? ? 2651 ?0.0 ?0.0 ?43396 ?1116 ? ? ? ? ?Ss ? May07 ? 0:08 /usr/sbin/upsd > root ? ? ?2654 ?0.0 ?0.0 ?39116 ?1172 ? ? ? ? ?Ss ? May07 ? 0:00 /usr/sbin/upsmon > nut ? ? ? 2655 ?0.0 ?0.0