similar to: Call drop weirdness

I did a clean install to freepbx 2.6.1 and now when i do *76 i get a 1 second flash on the screen then the phone hangs up. the FOP says it is on DND but some ext are still getting calls. once i do a *76 FOP still says I am on dnd. I am running asterisk 1.6.0.21. before i was getting a message like dnd activated and dnd deactivated. i posted this on the freepbx site and here is what i got

ping times are fine as well: [root at freepbx asterisk]# ping sipgate.de PING sipgate.de (217.10.79.9) 56(84) bytes of data. 64 bytes from sipgate.de (217.10.79.9): icmp_seq=1 ttl=57 time=46.7 ms 64 bytes from sipgate.de (217.10.79.9): icmp_seq=2 ttl=57 time=46.4 ms 64 bytes from sipgate.de (217.10.79.9): icmp_seq=3 ttl=57 time=46.7 ms 64 bytes from sipgate.de (217.10.79.9): icmp_seq=4 ttl=57

hi, let me explain in detail, what i have configured and what is happening now: 1st router w724v (Deutsche Telekom AG): - port forwarding, everything to destination port 51000-55999 to device with ip 192.168.2.50 (interface of 2nd router) 2nd router Bintec RS353j): - configured NAT, everything to port 51000-55999 to device 192.168.3.99 (same ports) other direction is totally open. I

Trying to make this work, and Office 365 support is useless, giving me the following response when I asked them for help troubleshooting a 488 Not Acceptable Here. Regarding your service request about configuring your PBX system with Office 365, we do not support specific setups for PBX systems for Unified Messaging. Please contact the vendor for more specific instructions and configurations.

Hello, I'm having what seems like a weird issue connecting Asterisk 13 (FreePBX 12) to a Cisco 2811 router via a chan_sip trunk. Whenever I try dialling out via this trunk, something appends '@CUBE' onto the end of the dialled number, as per the following examples; Asterisk log; app_dial.c: Called SIP/test/0429123456 at CUBE chan_sip.c: Got SIP response 500 "Internal Server

I am having trouble getting Google Chrome to accept a WebRTC call coming from Asterisk, even though Firefox can (now) accept the same call without issue. My setup is as follows: Server: CentOS 7 x86_64 (Elastix 4 RC) with IP: 10.1.0.4 192.168.5.146 asterisk-11.21.0 patched to work around https://issues.asterisk.org/jira/browse/ASTERISK-25659 openssl-1.0.1e-51.el7_2.2.x86_64 [root at elx4 ~]#

Hi all, I have a strange situation on a Asterisk 1.2.17 with FreePBX 2.2.1 Doing a select in the CDR table I noticed there are some calls with billsec greater than duration, duration is always 0 in those calls. How can this happens ? Am I missing something ? Tnx in advance Regards Edoardo Serra WeBRainstorm S.r.l.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Is it possible to use the instant messaging feature of Polycom phones in Asterisk? At the moment I'm seeing this in the SIP messaging when I try to send one from a Polycom 450. <--- SIP read from UDP:<CENSORED POLYCOM IP>:5060 ---> INVITE sip:0100@<CENSORED>:5060;user=phone SIP/2.0 Via: SIP/2.0/UDP <CENSORED POLYCOM

Hello! I'm facing a problem concerning MWI. The problem is: The phone switches off the MWI exactly at the moment the second NOTIFY package for one voice mail arrives. The phone switches off MWI independently if the voice mail has been acknowledged or not before. The behavior in detail: - Once each hour, phone sends SUBSCRIBE - Asterisk receives incoming voice mail for Device 200. - some

Hello friends: I am facing cutoffs randomly when negotiating calls. The PBX dials the destination, the provider (softswitch) receives the request *[1]* and sudenly the PBX hangs up the call* [2]* while the provider is still dialing it, as a consequence the remote peer receives a ghost call. Along the atempt I could see six times a messages regarding NAT isuues *[3]* I hope anyone can give me an

Dear list, I am currently trying to send faxes via T.38 using PJSIP (newest version 2.3) with Asterisk 13.0.2. After having configured PJSIP, I have seen several things the cause of which I would like to know. 1) Ports and IP addresses which PJSIP bind to I have configured one transport like that: [tr_wZCMk5MvC2ATNzAr] type = transport protocol = udp bind = 192.168.20.48 Nevertheless, PJSIP

I have a SIP trunk from my Asterisk server to an Avaya CM server. If I place calls inbound, everything works fine. If I place calls outbound, originating from the Asterisk box, everything works fine (I have done this with the use of the .call files). If I setup an extension with the findme-followme feature and have it try to hair-pin a call back out the same trunk to the Avaya, I get a

David, I should also note; 246 is my extension, it has IP 172.22.3.238. 172.22.4.8 is the PBX, and 172.22.4.12 is the 2800 gateway. The trunk is called ?testing? at the moment. The route that selects this trunk uses a 9 prefix. This system is in semi-production, so there might be fluff in the log from other active calls. Brendan Ord OntheNet - Network Engineer P 07 5553 9222 F 07 5593 3557

On Mon, Jun 5, 2017, at 04:26 PM, Michael Maier wrote: > On 06/05/2017 at 06:29 PM, Joshua Colp wrote: > > On Mon, Jun 5, 2017, at 01:22 PM, Michael Maier wrote: > >> > >> Do you have any idea where to start to look at? Adding additional output > >> in the source code? Which functions could be interesting? I may add own > >> debug code to see why things

Yes indeed. Do you have the dialplan, eg from /etc/asterisk/extensions.conf? Something is getting this OUT_3_SUFFIX variable and including it in a Dial to 172.22.4.12. On 18 August 2015 at 16:21, Brendan Ord <bord at staff.onthenet.com.au> wrote: > Starting to make sense when I saw this line: > > > > [2015-08-18 15:01:33] DEBUG[19366][C-00001cfc]: pbx.c:3785 >

I have a problem where SIP calls from some providers are dropping at 15 minutes. The topology is: Client sends calls to a host running OpenSIPS, OpenSIPS sends calls to an Asterisk server. Below, 'Client' is the IP address of the client's host (running FPBX-2.8.1(1.8.20.0) 'OpenSIPS' is the IP address of my host running OpenSIPS 1.7.2-tls 'Asterisk' is the IP

Thank you. I read that last yesterday afternoon, and I could've sworn I tried that but I will look into it again (I've tried so many different things it was getting cloudy what I've tried and what worked etc, combined that the extension config gets messed up after playing with it so much so I'm often recreating it as well). I also found a bug report in the FreePBX bug tracker

On 06/14/2017 at 10:17 PM, Joshua Colp wrote: > On Wed, Jun 14, 2017, at 05:09 PM, Michael Maier wrote: > > <snip> > >> >> I can now say, that asterisk / pjsip seams to work *mostly* as expected. >> Just one exception - and that's the package in question, which can't be >> seen in tcpdump. >> >> I extended the above patch by adding

Hello, I'm having this issue on my pbx, it appears that asterisk is refusing the codecs that my providers is proposing. My trunk configuration is: --- username=5x5x7x9x0x3 type=friend secret=CRcxn7sqwm qualify=yes port=5060 insecure=port,invite host=sip.txtxlxoxp.it fromuser=5x5x7x9x0x3 fromdomain=sip.txtxlxoxp.it disallow=all context=from-trunk allow=alaw --- A typical invite from my

On 06/14/2017 at 05:53 PM Joshua Colp wrote: > On Wed, Jun 14, 2017, at 12:47 PM, Michael Maier wrote: > > <snip> > >> >> I added this patch to see, if really all packages are are freed after >> they have been processed: >> >> --- b/res/res_pjsip/pjsip_distributor.c 2017-05-30 19:44:16.000000000 >> +0200 >> +++