similar to: need help with 6.3 install, kernel panic when os boots up

Chris Adams writes: > Once upon a time, isdtor <isdtor at gmail.com> said: > > 11:06:51.413549 IP (tos 0x10, ttl 128, id 0, offset 0, flags [none], proto UDP (17), length 390) > > 10.1.2.2.67 > 255.255.255.255.68: [udp sum ok] BOOTP/DHCP, Reply, length 362, xid 0x4007adc6, Flags [Broadcast] (0x8000) > > Your-IP 10.1.2.57 > > Server-IP

James, Actually we noticed that we've been running some old setup for our PXE boot/kickstart setup, so we're going to try just doing it with UEFI and see where that gets us. PEV ________________________________ From: James Peltier <james_peltier at sfu.ca> Sent: Wednesday, July 3, 2019 10:47 AM To: Virgo, Paul E. (GSFC-610.2)[ADNET SYSTEMS INC]; CentOS mailing list Subject:

> > On 7/1/2015 2:58 AM, Gene Cumm wrote: > >> I'm setting up UEFI booting and got to the point of having the system talk > >> >to the dhcpd/tftpd server, grab the first image files (syslinux.efi) and > >> >then continuously request the secondary image file (ldlinux.e64). > > So it appears to go deaf. > > > >> >I'm wondering

Mark, I did go into the BIOS to see if that made any difference, and didn't see anything to set/unset . That was the problem. PEV ________________________________ From: mark <m.roth at 5-cent.us> Sent: Wednesday, July 3, 2019 10:41 AM To: Virgo, Paul E. (GSFC-610.2)[ADNET SYSTEMS INC]; CentOS mailing list Subject: [EXTERNAL] Re: [CentOS] Install of CentOS 7.6 On Dell PowerEdge R830

On 7/1/2015 2:58 AM, Gene Cumm wrote: >> I'm setting up UEFI booting and got to the point of having the system talk >> >to the dhcpd/tftpd server, grab the first image files (syslinux.efi) and >> >then continuously request the secondary image file (ldlinux.e64). > So it appears to go deaf. > >> >I'm wondering if I'm missing something or if someone

Chris Adams writes: > Once upon a time, isdtor <isdtor at gmail.com> said: > > Yes, it looks like I'm out of luck and need to find a newer machine to test this with. Moving the tftp server works to an extent - server boots right into a grub prompt. > > Weird. I have a couple of Intel-based systems that do UEFI PXE boot > okay, but they're much newer than the 11th

Hello, This afternoon I wanted to upgrade to 7.1 two good old dell PowerEdge servers which were running FreeBSD 6.x. It went fine and quickly on the poweredge 1950, but it failed completely on the poweredge 1850. Facts: - boot cd and setup / operation of freebsd 6.x or 7.0 is fine Message log abstract: $ uname -v FreeBSD 7.0-RELEASE-p7 #0: Sun Dec 21 08:31:52 UTC 2008

Hi, CentOS7.1, Dell PowerEdge R730xd. How to check/get UEFI information by shell/bash terminal ? example:if UEFI is enabled? if secure boot is enabled? Thanks.

Once upon a time, isdtor <isdtor at gmail.com> said: > Yes, it looks like I'm out of luck and need to find a newer machine to test this with. Moving the tftp server works to an extent - server boots right into a grub prompt. Weird. I have a couple of Intel-based systems that do UEFI PXE boot okay, but they're much newer than the 11th gen PowerEdge (I have some of those still in

Virgo, Paul E. \(GSFC-610.2\)\[ADNET SYSTEMS INC\] via CentOS wrote: > All, > > Seems like the latest CentOS 7.6 and I are not playing well together, > these days. > > I'm attempting to use our pxeboot setup to install the latest CentOS 7 on > a Dell PowerEdge R830. The install starts then gets to a certain point and > hangs. That certain point is: FADT indicates ASPM

Hi all, My computer is booted with UEFI and Grub2. I tried to load VHD files with memdisk and boot from there. memdisk is extracted from 'bios/memdisk' in syslinux 6.03 zip file. In Grub2, I executed: linux16 /memdisk harddisk initrd16 /Win10.vhd Then the system frozen at 'initrd16' line. The VHD file is 8192MB, fixed image. I also tried to boot a small floppy disk (FreeDOS), and

Hi, Any folks on this list who have installed CentOS 6.3 on the new Dell Poweredge R815 servers? How was your experience? Thanks -Surya -- Surya Saha Department of Plant Pathology and Plant-Microbe Biology Cornell University, NY, USA http://www.linkedin.com/in/suryasaha

The regular installer we released for CentOS-6.3 does not work for UEFI enabled machine instances that do not have a BIOS fallback mode ( this includes physical machines as well as some virtualised environments ). To address this problem, we are releasing another minimal install image for CentOS-6.3/x86_64. This image has been tested on various IBM, HP and Dell hardware along with VMWare and

Just installed CentOS 6.3 from a minimal install disc. All was well, so I ran a yum update, as well as installed some additional packages (mysql, httpd, libjpeg, libpng, and more that I don't remember off the top of my head). Went to reboot the machine and now it won't book up. As it starts to boot, says: Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init Not

This issue has been around for some months, but other things keep crowding out a fix. uname give me 3.10.0-1160.36.2.el7.x86_64 #1 SMP Wed Jul 21 11:57:15 UTC 2021 yet I have 3.10.0-1160.76.1.el7.x86_64 3.10.0-1160.81.1.el7.x86_64 3.10.0-1160.83.1.el7.x86_64 3.10.0-1160.88.1.el7.x86_64 loaded. The system uses UEFI to boot. sudo ls -l /sys/firmware/efi gives: total 0 -r--r--r--.? 1 root

Hi, Has anyone else encounter the following; While testing the new CentOS 6.5 kernel-2.6.32-431.1.2.el6.x86_64 on a Dell PowerEdge 2950 in the lab it kernel panics on boot up, complaining about the scsi_wait_scan Module signed with unknown public key. The Dell Poweredge 2950 is running the latest 2.7.0 BIOS and BMC Firmware v2.50 with PERC5/i integrated (running latest firmware 5.2.2-0072,

I have installed dom0 Wheezy 64 bit on Dell PowerEdge T310 with kernel from package and xen-unstable. System is in Uefi mode and booted with grub-efi-amd64. Booting without xen efibootmgr works, while with xen not, efivars kernel module is loaded but show this message: efibootmgr Fatal: Couldn''t open either sysfs or procfs directories for accessing EFI variables. Try ''modprobe

On 2018-08-02 18:25, KARBOWSKI Piotr wrote: > Hi, > > I am trying to get a UEFI bootable USB. And I am unable to make it > working. I have two x86_64 systems and both of them 'hangs' when I > choose to boot UEFI from USB. > > I've created fat32 formated partition with ef00 type. I placed EFI/BOOT > there with content of efi64/ distribution, I've created

> Hi, > > I am trying to get a UEFI bootable USB. And I am unable to make it > working. I have two x86_64 systems and both of them 'hangs' when I > choose to boot UEFI from USB. > > I've created fat32 formated partition with ef00 type. I placed EFI/BOOT > there with content of efi64/ distribution, I've created syslinux.cfg and > renamed syslinux.efi

Hi, I am trying to get a UEFI bootable USB. And I am unable to make it working. I have two x86_64 systems and both of them 'hangs' when I choose to boot UEFI from USB. I've created fat32 formated partition with ef00 type. I placed EFI/BOOT there with content of efi64/ distribution, I've created syslinux.cfg and renamed syslinux.efi to BOOTX64.EFI. However, it does just