similar to: alsa channel

I have a couple asterisk boxes, running sip between both boxes. 1.4.43 on both. both are installed from source, both have default settings, My config for one box is: [devgeis] type=friend defaultname=devgeis username=devgeis secret=yes disallow=all allow=ulaw allow=alaw allow=gsm rtptimeout=60 rtpholdtimeout=60 rtpkeepalive=60 host=192.168.1.8 context=panel The other box is the same. There

I am using asterisk 13.33.0 and POlycom phone with the latest firmware. The polycom phone is behind a firewall, the server is in the cloud. If the polycom has just booted - it receives a call, after some time (couple minutes) it no longer receives a ring. I see no errors in the CLI - looks just like the previous call as far as I can tell. Then reboot the phone and as soon as its ready call it

Hi, I am not sure if I am doing something wrong, but I can't get MeetMe to work with GSM codec (Asterisk 1.6.1 SVN r190371). My config files below: ---- sip.conf: ---- [general] context=common canreinvite=no bindport=5060 bindaddr=78.105.1.127 disallow=all allow=alaw allow=gsm rtptimeout=600 rtpholdtimeout=3600 rtpkeepalive=30 nat=no jbenable=yes tcpenable=no realm=dev-sip.wima.co.uk

I have a cloud server... I have a phone in Chicago I have a phone in Indiana. Both are registered to the cloud server - using chan_sip and Asterisk 18.18.0 I can send a pre-recorded message to Chicago it auto answers and hear audio. I can do the same to the phone in indiana. however - when i call from Indiana to Chicago - the phone rings - but I do not get any audio? I have in sip.conf

Firstly, I'm running Asterisk 1.4.4 on Solaris 10. I have several different internal SIP phones all sharing a single IAX2 VoIP channel. PHONES |------------- <SIP/uLAW> --------------| ASTERISK |-------------- <IAX2/g729> ------------|VoIP/ISP The g729 codec has been registered successfully and appears to be detected by Asterisk (NOTE: I have changed what I thought might have

Hi, I have been experimenting with NAT and Asterisk a bit now. Though I have made progress along the way, I have come across the following problem. I'll really appreciate if anyone can provide me any help or pointers. Thanks! Successful Scenario: ------------------- All sorts of NAT calls are successful with full two-way media when both end points are locally subscribed users. Problem

Greetings List. we're facing a strange case with my system where in the middle of the call .. after like 7 minutes (not necessarily ) the callee is unable to hear the caller however the caller is able to hear the called party. the scenario is the following. 1- 15 computers running Windows XP SP3 joining a Windows Domain Controller with DHCP , DNS, ISA Internet Acceleration Server. 2- Internet

Hi All, I have polycom phones setup in an office connected to a cloud asterisk server. The polycom phones can call out just fine - audio just fine. However a call coming into the cloud asterisk answers fine - get the autoattendant, enter the extension and the polycom does not ring. The CLI shows that the correct SIP extension is being Dialed (SIP/524) Looks like I'm getting a 401 permission

I was trying to compile alsa 1.0.14rc3 on centos 4.92 and there are errors. I have informed alsa. They dont seem to happy redhat has once again messed up alsa with their custom kernel. Just FYI. Jerry CC [M] /usr/src/alsa-driver-1.0.14rc3/misc/ac97_bus.o In file included from /usr/src/alsa-driver-1.0.14rc3/misc/ac97_bus.c:1: /usr/src/alsa-driver-1.0.14rc3/misc/../alsa-kernel/ac97_bus.c:30:

Greetings, I've noticed a problem that might originate from my Asterisk configuration, could use a hand in sorting it out. Problem is a 488 response from Asterisk whenever it gets RTP/SAVPF profile in the SDP. My current setup has Asterisk Kamailio realtime integration, and Kamailio uses dispatcher to route calls for Asterisk to handle. Now I have only one Asterisk, on the same machine as

Dears; I am facing a problem in disconnecting the calls, it is related to the rtptimeout (disconnecting if there is no RTP packets from both sides). My Asterisk Box is behind NAT but there is a static real IP address at the ADSL router. We call from the Mobile to the PSTN analogue numbers which are connected to Asterisk Analogue card (the telephone lines are analoge), and then we dial the

Hi, Red Hat 9.0 Asterisk 1.2.7.1 I'm having a bit of an intermittent problem with my SIP account. Often (but not always) when I start * or RELOAD my dial plan from the CLI I get this message: >Apr 30 11:01:20 WARNING[12785]: chan_sip.c:11822 add_realm_authentication: Format for >authentication entry is user[:secret]@realm at line 31 >Apr 30 11:01:21 WARNING[12785]: acl.c:244

I tried to install alsa 1.0.19 on centos 5.3 64 - did not work - compile errors. I need to re-install alsa-lib and alsa-util . I dont want to do rpm -e first on those packages as dependcy is crazy. I know they were installed (rpm -qa | grep alsa tells me so) I just want to re-install ? How do I do that? Thanks, Jerry

I've had a heck of a time getting a SIP channel to work in Asterisk 1.2.7.1 (Redhat 9.0). I've done it successfully a number of times on pre 1.2 versions of Asterisk so perhaps it's version related. Any insights are welcome! At first I wasn't able to dial out on the SIP channel _whenever_ I started Asterisk (i.e. not just when the box was booted). I always had to do a reload

Hi; How can I know the duration that the DAHDI channel is still used? I need to know its status and since when it is in this status, how? Also, is it possible to hangup the channel if it has been openned more than 90 minute? Other than using the timeout in the Dial command (because this I know it). What is happening with me that from time to time, I find some DAHDI channels are stayed connected

Hello everyone, I'm getting DIALSTATUS=CHANUNAVAIL when a call is trying to get one of my queue interfaces, despite the fact it is free at that time, can you give help? 1. I see many sip channels from that extension: [root at mysweetpbx]# asterisk -rx "*sip show channels*" |grep 648 Peer User/ANR Call ID Seq (Tx/Rx) Format Hold

Hi all, I need to compile alsa-project 1.0.16 on the latest centos 5.1 kernel. I am getting this error. What to do... ? CC [M] /home/silentm/MessageNet/alsa-project/alsa-driver-1.0.16/acore/sound_oss.o CC [M] /home/silentm/MessageNet/alsa-project/alsa-driver-1.0.16/acore/info_oss.o In file included from

Hi, Anyone here using sipgate.de ? It worked for months, but for a couple of days now I'm unable to register with them. My account is ok, because I can login to the website. Asterisk keeps showing me: Feb 25 23:50:18 NOTICE[5144]: chan_sip.c:5269 sip_reg_timeout: -- Registration for 'XXXXX@sipgate.de' timed out, trying again (Attempt #n) I looked at the sip debug stuff, and all I

Hello, For the moment I have the following settings in my sip.conf. I want to optimize them to archive the following things: - for the moment all my users will re-register too often. I want that only lagged users to re-register quickly. - check from time to time all users but no too often to see if is logged and can be called. Overall i want only lagged users to reregister and users with good

Hi List!! Thanks for the colaboration, especially to Richard Cavanna who gave me the necessary support. I followed your indications and the comunication was better for the test users. The warning indication is no jumping anymore and the voice is not delayed. This is my sip.conf: [general] context=default ;allowguest=no ;realm=mydomain.tld bindport=5060 bindaddr=0.0.0.0 srvlookup=yes