similar to: SMART Prefailure Attribute messages

Package: logcheck Version: 1.2.43a Severity: normal -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have messages like these in my logs: Apr 27 10:05:49 localhost smartd[9357]: Device: /dev/hda, SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 58 to 57 Apr 27 10:05:49 localhost smartd[9357]: Device: /dev/hda, SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 58 to 57

Issue: Vista reads slowly from a samba server. This appears to pop up periodically here and elsewhere. My samba.conf file has: [homes] ... vfs objects = readahead As suggested elsewhere. Writes are approximately 17-18MB/s which is acceptable. Reads are in the 8MB/s range which is appalingly slow. Using linux smbclient and windows XP clients I can read at 25+MB/s. I've enabled vfs

Hi All, Im seeing these errors (below) between 2 and 40 times a day, for the last year (or more if i had the older logs) in /var/log/messages. The values consistently toggle between 4 or so values, drifting up and down but never outside the mean +-2 /dev/hda sits around 21 to 38 degrees (according to smartctl) Does anyone know *how* serious they are? I cant find much on the web other than

> PDC20265: IDE controller at PCI slot 0000:00:11.0 > PCI: Found IRQ 10 for device 0000:00:11.0 > PDC20265: chipset revision 2 > PDC20265: 100% native mode on irq 10 > PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary > PCI Mode. > ide2: BM-DMA at 0x8000-0x8007, BIOS settings: hde:DMA, hdf:pio > ide3: BM-DMA at 0x8008-0x800f, BIOS settings: hdg:pio,

Have 4 harddrives hde,hdg etc all of these drives are mounted in samba. When i copy file from one drive to another i notice that server sends the file to my computer and then back to itself (into the right place). The file will be copied but doing so it will eat half of my network bandwith. Is it possible to aviod this? Best Regards Patrick Betfjord

Hi, I have read this thread and want to say that I have expirienced the same problem. Once, when I was loged in, one of my filesystems ( root filesystem :( ) became read-only with the same symptoms. But results was more tragic. Almost in each directory avg. 10% of files had incorrect attributes, owner, links, etc. But filenames was correct. So, I was obliged to re-create root filesystem :(

Hi Andre, ext3 folk, It would be really great if you could help me out here, I'm not sure if this is a hardware issue, a driver issue, an ext3 issue or some combination of them... I have a KT133A motherboard with an on-board promise controller, and an ACARD ATP865 in a PCI slot. I'm running 2.4.19-ac4 with the lvm 1.0.5 patches. The acard has two drives, hde and hdg attached to it, both

Hi, This issue only happens on my IA32E VMX domain. IA32 VMX domain is okay. I am trying VBD disk in IA32E VMX domain. I used following disk configuration to create an IA32E VMX domain. disk = [ ''file:/mnt/disk1.img,hda,w'', ''file:/mnt/disk2.img,hde,w'' ] After creating VMX, its keyboard can not be used properly. For example, if pressing

Hi, This morning one of my servers (centos 4.5) refused to boot. The console shows a lopp message grub loading stage2... I've been able to boot from the install CD choosing the rescue option. I can chroot /mnt/sysimage with no problems and even started the services (network, mysql , httpd etc). How can I solve this? I've followed the manual (

OK, been perusing the archives and Google, but can't find what I want. I'm building up a 512 MB compact flash using the CLFS directions to build the filesystem. That works great, but I would like to use extlinux to make the cflash bootable on my little SBC. However, to date, no dice. Attached is my extlinux.conf file and the steps I have used to make this work. Initially I tried to

Hello, this morning my centos 5 server (2.6.18-53.1.4.el5) failed on the dvd device and disabled dma. The dvd-writer (/dev/hdg) is connected to the following controller as a secondary master. 02:07.0 RAID bus controller: Silicon Image, Inc. PCI0680 Ultra ATA-133 Host Controller (rev 02) There is also an harddisc as primary master connected on this controller. This harddisc is the only device in

On 8/5/2015 12:34 PM, Chris Murphy wrote: > On Wed, Aug 5, 2015 at 9:12 AM, Bowie Bailey <Bowie_Bailey at buc.com> wrote: >> I am trying to upgrade my system from 500GB drives to 1TB. > I'm going to guess that there are no IDE drives that have 4096 byte > physical sectors, but it's worth confirming you don't have such a > drive because the current partition

I'm trying to install CentOS 2.1 on SATA drive that lives on ICH7R controller. I have the controller setup in BIOS to "compatibility" mode, which means it should look just like regular IDE controller to the OS. In this mode, ide0 and ide1 are PATA controllers, and 4 SATA ports are mapped to ide2 and ide3. If I boot from the 2.1 installation CD, all the drives are detected

>-----Original Message----- >From: xen-users-bounces@lists.xensource.com >[mailto:xen-users-bounces@lists.xensource.com] On Behalf Of Liang Yang >Sent: 2006年9月12日 8:57 >To: xen-users@lists.xensource.com >Subject: [Xen-users] Help: Xen HVM Domain can ONLY support four hard >drivesat most??? > >Hi, > >I have 5 SATA hard drives and I want to expose all these five

I have a CentOS 5.6 system (recently installed) that, for some reason, has decided to mangle one of its drives, specifically /dev/hde1 ... No errors anywhere, just rebooted the machine over the weekend and it's gone. Up till the reboot, the drive was fine, I was writing to it without a problem. fdisk tells me: ---------- # fdisk -l /dev/hde Disk /dev/hde: 160.0 GB, 160041885696

Sir or Madam, I am in a new project writing software for embedded apps. We use a single board computer consisting of (a) linux (b) syslinux boot loader (c) compact flash file system (d) x86 processor. (see www.embeddedx86.com) (e) other HW and SW. Using vendor provided files, I can easily prepare a compact flash (CF) system which boots 2.4.23 linux just fine. I can telnet in and so on and so

OK, I have managed to get software RAID 1 running on my wonderful Proliant server but now have two challenges: 1) Fresh after an OS install and reboot, the RAID array starts to do its stuff but straight away (as part of the boot messages) I am told that the second disk is 'not ready for command' and the system hangs as soon as resyncing starts. I think this is fixed by adding an hdparm

>-----Original Message----- >From: Jan Beulich [mailto:jbeulich@novell.com] >Sent: 2006年9月12日 17:06 >To: You, Yongkang >Cc: xen-devel >Subject: Re: [Xen-devel] 32E (64bit) VMX keyboard is out of control, ifgiven an >addition ''hde'' > >>After creating VMX, its keyboard can not be used properly. For example, if >pressing

On Monday 14 March 2005 06:29 pm, Mark Williamson wrote: > > I don''t know if this is the right place to post, but I can''t find any > > info about my problem on the net. > > Yes, this is the right place. > > > title Xen2610 > > kernel /boot/xen.gz dom0_mem=131072 console=vga > > module /boot/vmlinuz-2.6.10-xen0 root=/dev/hde1 ro console=tty0

Hi, From cset 10921, ioemu: prefix is removed from disk config in /etc/xen/xmexample.hvm. Now HVM VBD driver is available, this thus raises a question: how would HVM domain know if one disk is a qemu-dm disk or a VBD disk? From current implementation, qemu-dm will recognize disk had, hdb, hdc, hdd, and VBD drive can recognize all disk (had~hdd, hde, hdf ...) . So the result is: qemu-dm will