similar to: a little help w/ sys_clone

Hello, suppose I want to use a special configuration for my IBM/1814 storage array luns, then I put something like this in multipath.conf devices { device { vendor "IBM" product "^1814" product_blacklist "Universal Xport" path_grouping_policy "group_by_prio" path_checker

hello, klibc/include/signal.h include asm/signal.h which prefixes the __sighandler_t definition with a __user annotation. __user not being defined previously leads to a compilation breakage. It's the only occurrence for now, so the following dirty work-around works here : add a "#define __user" at klibc/include/signal.h head. regards, -- christophe varoqui

With 32bit etch debian, following an yesterday: #aptitude update (and upgrade) Daniel: As you migth remember, I got the error "failure of status 127" as on last June 10 (on that occasion following apt-get update and upgrade) At that time the remedy was: #apt-get remove libwine followed by #apt-get install libwine Now I prefer aptitude or dselect, so that yesterday #aptiture update

Hi, My storage admin just assigned a Lun (fibre) to my server. Then re scanned using echo "1" > /sys/class/fc_host/host5/issue_lip echo "1" > /sys/class/fc_host/host6/issue_lip I can see the scsi device using dmesg But mpath device are not created for this LUN Pleas see below. The last 4 should be active and I think this is the problem Kernel:

Hi All, My CentOS 5.1 server is using iSCSI attached disks connecting to a dual controller storage array. I have also configured multipathd to manage the multiple paths. Everything works well, and on boot the dev nodes are automatically created in /dev/mapper. On these devices, I have created logical volumes using lvm2. My problem is that lvm does not recognize these iscsi/multipath volumes on

Dear list, we have a relatively new Sun Storage 7310, where we connect CentOS 5.5 Servers (IBM LS21/LS41 Blades) via Brocade Switches, 4GBit FC. The Blades boot from SAN via qla2xxx, and have no harddisks at all. We want them to use multipathing from the very beginning, so /boot and / are already seen by multipathd. Problem is, that the Sun 7310 has two storage heads which run in

Every row in the grid, has a checkbox ahead. pepole can select multi-row through these checkboxes, and then press a [delete] button to delete all the selected rows in a single action. how can i do this? -- Posted via http://www.ruby-forum.com/.

I have searched this list and others, and see other pepole having this issue. However, I have not seen how to fix it. Sep 6 18:52:36 *WARNING*[4620]: *chan_sip.c*:*1835 retrans_pkt*: Maximum retries exceeded on transmission 778f89593967725f0abe40eb1752504c for seqno 1620 (Critical Response) Sep 6 18:52:36 *WARNING*[4620]: *chan_sip.c*:*1835 retrans_pkt*: Hanging up call

Hi, I tried to install Centos7 x86_64 minimal 1503-01 from an USB flash drive on my old Dell Latitude E6500 laptop. boots up in text mode, switches text resolution, writes: Started Show Plymouth Boot Screen Reached Target Paths Reached Target Basic System. then hangs for some time, eventually starting dracut emergency shell. log says: multipathd: sdb: spurious uevent, path

Dear Xen users! In case you were struggling with recent version of th gplpv drivers, I''ve possibly found an LVM related bug in it, and reported to James Harper. Thats''s the point: I''ve tested the mentioned version of your driver on top of 32bit xen-3.2.1 32bit xen-3.3.0 and 64bit xen xen-3.3.0 hypervisors, dom0 was always an appropriate version of a 32bit PAE kernel,

Hi Max, On Fri, 4 Oct 2019 14:01:22 +0000, Max DiOrio <Max.DiOrio at ieeeglobalspec.com> wrote: > Looks like this is the actual error: > > 2019/10/04 09:51:29.174870 ctdbd[17244]: Recovery has started > 2019/10/04 09:51:29.174982 ctdbd[17244]: ../ctdb/server/ctdb_server.c:188 ctdb request 2147483554 of type 8 length 48 from node 1 to 0 > 2019/10/04 09:51:29.175021

Hi Konrad, Sometime ago i reported this one at boot up: [ 3009.778974] mcelog:16842 map pfn expected mapping type write-back for [mem 0x0009f000-0x000a0fff], got uncached-minus [ 3009.788570] ------------[ cut here ]------------ [ 3009.798175] WARNING: at arch/x86/mm/pat.c:774 untrack_pfn+0xa1/0xb0() [ 3009.807966] Hardware name: MS-7640 [ 3009.817677] Modules linked in: [ 3009.827524] Pid:

This has been an ongoing issue with all of the 1.4 releases. In several games, notably Oblivion, Fallout 3, Fallout:NV, and Far Cry, the mouse will not function properly. On main menus, the mouse will be stuck in one quadrant of the screen, as if what the mouse thinks the screen boundaries are is not aligned with the actual boundaries. In game, the mouse swings wildly all over the screen,

Hi, Hope this is the right place to ask this. I have set up 2 ubuntu lts machines with an IBM iscsi san. I have set up multipathd and ocfs2 and it seems to be working. The problem is that when I run up ocfs2console it hangs (the console app, not the system). Using strace, I can see that it is running through all the /dev/sdx devices and loops trying to access the first one in

Hello Community, my name is Strahil Nikolov (hunter86_bg) and I would like to update the following wiki page . In section "Create the New Initramfs or Initrd" there should be an additional line for CentOS7: mount --bind /run /mnt/sysimage/run The 'run' directory is needed especially if you need to start the multipathd.service before recreating the initramfs ('/' is on

I have several CentOS 6 boxes that mount iscsi based luns and use mpath. They all had problems shutting down as a result of unused maps not getting flushed as the system halted. After examining the init scripts, netfs, iscsi and multipathd all had the correct order but mpath failed to flush these maps and the system waited indefinitely. In the meantime I hacked this by adding a `/sbin/multipath

Hello I have a wounderfull linux/samba server running as pdc for a network. Now to the thing. I would like to add remotedesktop capabilites so that users outside could login to the system and get their desktop up from home or another country.. Is there a way to acomplish this. Do i need a windows terminal server and do i need to configure it so that it is a member of the domain or a bdc,pdc???

Hi, WARNING: Long post ahead I have an issue when starting multipathd. The kernel complains about "blk_cloned_rq_check_limits: over max segments limit". The server in question is configured for KVM hosting. It boots via iBFT to an iSCSI volume. Target is COMSTAR and underlying that is a ZFS volume (100GB). The server also has two infiniband cards providing four (4) more paths over SRP

Greetings, Last night I manually unpresented and deleted a LUN (a SAN snapshot) that was presented to one node in a four node RAC environment running OCFS2 v1.4.1-1. The system then rebooted with the following error: Oct 21 16:45:34 ausracdb03 kernel: (27,1):o2hb_write_timeout:166 ERROR: Heartbeat write timeout to device dm-24 after 120000 milliseconds Oct 21 16:45:34 ausracdb03 kernel:

Hi all, I am trying to configure a failover multipath between 2 GNBD devices. I have a 4 nodes Redhat Cluster Suite (RCS) cluster. 3 of them are used for running services, 1 of them for central storage. In the future I am going to introduce another machine for central storage. The 2 storage machine are going to share/export the same disk. The idea is not to have a single point of failure