similar to: Simple routing question

I am contemplating converting some of our internal networks from routable to private IPv4 address space. I have a question about RIP as implemented under Cisco IOS 12.x. Presently the setting for rip is: router rip version 2 passive-interface [[FastEthernet]]0/0 network aaa.bbb.ccc.0 no auto-summary What I would like to know is how one routes the entire 192.168/16 address space using rip.

I have been looking at this problem on and off for a considerable period. Given my lack of knowledge I have been unable to resolve this quickly and in consequence it has been constantly shoved to the background as other issues arise. Here is the situation: I have two dual-homed kvm hosts both running CentOS-6.7 and identically configured. These are connected to the same LAN segment via

This is mildly off topic since it has more to do with TCP/IP networking than with CentOS per se. However, at the risk of ruffling a few feathers I would like some advice on how to resolve the following routing problem: Given: dual homed host running CentOS-5.2 with eth0 = 2xx.yyy.zzz.23 eth1 = 192.168.219.1 and a Cisco gateway at 2xx.1xx.y7y.1 with the following networks: interface

I am experiencing a problem with yum on one of my CentOS-5.5 systems. Specifically, on Friday past (July 16), I ran yum update as root. Yum displayed all of the outdated packages and asked if I wanted to proceed. An answered yes. This first package downloaded was nss. At this point yum simply stopped processing or responding. A ctrl-c at the yum session terminal window did not interrupt the

I am seeing an issue with getting certain sip devices to be recognized as defined SIP clients host= in the sip.conf and the only deference that I can find btw sources that work and don't work is that devices that send packets with an Initial Via header of themselves appears to work and pick the context correctly but those that don't have the Via just get dropped in the context of the

After a lot of processing I get a matrix into M. I expected each row and column to be a vector. But it is a list. R-Inferno says... "Arrays (including matrices) can be subscripted with a matrix of positive numbers. The subscripting matrix has as many columns as there are dimensions in the array—so two columns for a matrix. The result is a vector (not an array) containing the selected

Hi, I want to stop routing for 1 particular host in my network. I thought that this would do it: iptables -D INPUT -d aaa.bbb.ccc.ddd -j DROP iptables -D INPUT -s aaa.bbb.ccc.ddd -j DROP But that still shows traffic. What is the corract way to do that? Groeten, Joost Kraaijeveld Askesis B.V. Molukkenstraat 14 6524NB Nijmegen tel: 024-3888063 / 06-51855277 fax: 024-3608416 e-mail:

Dear all, How could I use variables in a loop that their names are in a vector? For example: aaa <- 1:10 bbb <- aaa*2 ccc <- aaa+bbb varn <- c("aaa", "bbb", "ccc") m <- rep(NA, 3) for (i in 1:length(varn)) m[i] <- mean(varn[i]) # wrong thanks in advance Juli -- "Wars do not solve problems, wars generate even more problems"

CentOS-6.6 We have a host that has multiple IPv4 addresses aliased to eth0. The primary address is 216.185.71.x and the alias is 192.168.6.x. This host connects to devices on both netblocks without problems. Only default routing is used and it looks like this: #ip route 192.168.6.0/24 dev eth0 proto kernel scope link src 192.168.6.x 216.185.71.0/24 dev eth0 proto kernel scope link src

I installed a new CentOS-6.3 kvm guest on a recently provisioned kvm host also running CentOS-6.3. This guest will not connect to the network and the host cannot connect to it via its public IP address. I had previously installed a guest system on thst same kvm host using the same ISO and that system connects to the network without problem. I next created a third guest isntance and this too does

I installed a new CentOS-6.3 kvm guest on a recently provisioned kvm host also running CentOS-6.3. This guest will not connect to the network and the host cannot connect to it via its public IP address. I had previously installed a guest system on thst same kvm host using the same ISO and that system connects to the network without problem. I next created a third guest isntance and this too does

Hello, I am trying to setup a samba4 AD dc in my network using smb-tool. Everything seems to work except DNS forwarding. If I query for the dc root at dc:~# nslookup dc.local.domain.it I get the correct answer: root at dc:~# nslookup dc Server:???????? aaa.bbb.ccc.ddd Address:??????? aaa.bbb.ccc.ddd#53 Name:?? dc.xxxx.yyyy.it Address: aaa.bbb.ccc.ddd but if I query for an external domain: root

I have the following network: External Interface External Interface ccc.ccc.ccc.ccc aaa.aaa.aaa.aaa | | --> VPN <--> Internet <--> FreeBSD Client (NATed extip: bbb.bbb.bbb.bbb) | FW-1 Protected Net ddd.ddd.ddd.ddd/24 VPN: ipsec freeswan (UDP encapsulated tunnel) ccc.ccc.ccc.ccc has port 136/UDP open for

Dear Friends. I found a puzzling phenomenon in R when you use 'if' within a function: # defining a function aaa aaa=function(a) {if (a==1) {aaa=1}; if (a!=1) {aaa=2} } # using the function: > b=20 > bbb=aaa(b) > bbb [1] 2 > typeof(bbb) [1] "double" > > > c=1 > ccc=aaa(c) > ccc NULL > typeof(ccc) [1] "NULL" It seems that only the last

I run R 2.1.1 in a Linux environment (RedHat 9) although my question is not platform-specific. Consider the following: > A <- c("Prefix-aaa", "Prefix-bbb", "Prefix-ccc") > B <- strsplit(A, "-") > B [[1]] [1] "Prefix" "aaa" [[2]] [1] "Prefix" "bbb" [[3]] [1] "Prefix" "ccc" How

Dear R helpers I have a data which gives Month-wise and Rating-wise Rates. So the input file is something like month           rating           rate January        AAA             9.04 February      AAA             9.07 .......................................... .......................................... Decemeber     AAA            8.97  January           BBB           11.15 February        

snat not working my local ip is aaa.aaa.aaa.aaa asterisk sitting on the internet at ip bbb.bbb.bbb.bbb my firewall''s internal ip is 192.168.0.254 i did snat: iptables -t nat -A POSTROUTING -o ppp0 -j SNAT --to aaa.aaa.aaa iptables -t nat -L -v gives: Chain POSTROUTING (policy ACCEPT 23663 packets, 2182K bytes) pkts bytes target prot opt in out source destination 33056

hello: i currently am using Puppet to run some commands in a sequence. there are two sequences of exec resources. we found that we cannot use require => Exec and it does not work at all as expected. here is some sample code. exec { "exec-AAA": command => "/bin/true", returns => 0, notify => Exec["exec-BBB"], } exec { "exec-BBB":

I recently moved my Asterisk configuration to a new server and re-built Asterisk from CVS. Now, I'm experiencing the following issue with SIP: Executing Dial("Zap/1-1", "SIP/100|20") in new stack NOTICE[-1232077904]: File app_dial.c, Line 518 (dial_exec): Unable to create channel of type 'SIP' == Everyone is busy at this time Has anyone seen this issue before?

Hi R users, I am new to R and am trying to merge data frames in the following way. Suppose I have n data frames each with two fields. Field 1 is common among data frames but may have different entries. Field 2 is different. Data frame 1: Src Target1 1 aaa 1 bbb 1 ccc 2 aaa 3 ddd Data frame 2: Src Target2 2 aaaa 3 dddd 4 bbbb 4