similar to: Advice on partitioning a Dell MD1200 disk array

We are looking at building a storage platform based on Dell HW + ZFS (likely Nexenta). Going Dell because they can provide solid HW support globally. Are any of you using the MD1200 JBOD with head units *without* an MD3200 in front? We are being told that the MD1200''s won''t "daisy chain" unless the MD3200 is involved. We would be looking to use some sort of

Hi All, I'm trying to run multiple instances ( 2 ) of Apache on a single IP address. I need this because I need the two instances to run as different users. I've set up two config files with the following: config-1 config-2 ServerRoot "/etc/httpd" ServerRoot "/etc/httpd" Listen 10.220.1.156:80

Hi, I am planning to install CentOS 6.4 on Dell R720 which has hardware raid card and 6 hard disk slots available. I have planned with the below set up :- *2 Hard disks configured in RAID 1 for installing OS * *4 Hard disks configured in RAID 10 for data drive.* Please suggest and recommend if the above approach is correct and let me know if i am missing anything which is crucial to set up a

Package: xen-hypervisor-4.4-amd64 Version: 4.4.1-9 Severity: grave Justification: renders package unusable Hi, I was running Debian Wheezy (amd64) and xen-hypervisor 4.1 on a Dell PowerEdge R720. Xen was working fine. Xen was configured with LVM Now, I'm trying Debian Jessie (amd64) and I have a strange problem. After booting, Xen seems to be working : /etc/init.d/xen status ? xen.service

On Wed, 2019-12-04 at 20:18 +0100, agents at meddatainc.com wrote: > CAUTION: This email originated from outside of the University of > Limerick. Do not click on links or open attachments unless you > recognize the sender's email address and know the content is safe. > On 11/25/2019 11:14 PM, isdtor wrote: > > > > Enable and start httpd. Write a build script that builds

On Wed, 2020-04-22 at 08:25 -0500, johnny at centos.org wrote: > EXTERNAL EMAIL: This email originated from outside of the University > of Limerick. Do not click on links or open attachments unless you > recognize the sender's email address and know the content is safe. > On 4/21/20 2:09 PM, Tony Molloy wrote: > > > > Hi All, > > > > I've just

Hi, I have HT Feature available on my Dell Server R720. Please help me understand if HT is enabled on the server, will there be a performance impact. What are the deciding factors to enable HT on the servers. Regards Kaushal

Hello Adam, i have the same problem, you written on 26. April. Could you solve the Problem till now? Here some Info about my system: Dell PE 2850, Dual CPU, 4GB RAM. Perc4Di with 4Disks-Raid5 and 2Disks-nonRaid Dom0 and all DomUs are loading fine. (2.6.16) At random times the hole maschine hang. I was not able to capture anyting at this time. I have self compiled Kernel without initrd. I

Hi, I have updated the firmware for perc raid controller card, network card, IDRAC firmware and the BIOS version on Dell R720 server. I have installed CentOS 6.4 and updated with all the latest packages using yum -y update. # cat /var/log/messages | grep -i error Sep 23 14:09:35 x24 kernel: ERST: Error Record Serialization Table (ERST) support is initialized. Sep 23 14:09:35 x24 kernel: ACPI

Hi, I want to move my mail server from sendmail to postfix over christmas. I've got a test server running with the following: postfix dovecot postgrey amavisd-new clamav spamassassin I've followed the howto's on the wiki <http://wiki.centos.org/HowTos> with the exception that I installed amavisd-new and clamav from the EPEL repo rather than rpmforge. Things work OK with

I''m trying to configure a DELL R720 (not a pleasant experience) which has an H710p card fitted. The H710p definitely doesn''t support JBOD, but the H310 looks like it might (the data sheet mentions non-RAID). Has anyone used one with ZFS? Thanks, -- Ian.

I'm setting up a local mirror server on a CentOS4 box. I want it to serve files over http, nfs and ftp. I've set this up with the mirrored directories on a separate partition. I've got the http and nfs working but am having some trouble with ftp. I'm using vsftpd as the ftp server. I can log in to the ftp server and get to the pub (/var/ftp/pub) directory. However when I try

Happy Friday, List! I''m spec''ing out a Thumper-esque solution and having trouble finding my favorite Hitachi Ultrastar 2TB drives at a reasonable post-flood price. The Seagate Constellations seem pretty reasonable given the market circumstances but I don''t have any experience with them. Anybody using these in their ZFS systems and have you had good luck? Also, if

Hi, this server, a Dell R720 has 4 bge on board, Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000 bge0: APE FW version: NCSI v1.1.7.0 bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus0: <MII bus> on bge0 ... I have connected the ethernet to port labeled 0, but it appears as bge2, how can this be corrected? thanks, danny

Hi, Thanks for your answer. During the Debian jessie installation, I had a problem at grub step. The os-prober part was stuck : grub was at 66 % (os-prober tried to browse all the VM on LVM partitions) After more than 15 minutes, os-prober seems to be stuck, so I rebooted the server. I had to boot in rescue mode, then, reinstalled grub and modified it to add

Hello I need a description how to move painlessly samba from one system to another without re-adding to the domain windows clients. Currently, I have samba Version 3.0.28a-1.fc7 on Fedora 7 and I want to move it on CentOS 5.5 As far as the server hardware remains the same. In addition to changing the system i would like to change new disks and add a new 3ware 9650SE Raid controller (samba

I have an intermittent problem with my Dell blades, out of 80 blades 69 of them kickstarted Centos 6 fine using PXE The other 11, I get a c0t0 not found error (indicating it is not finding the local disk on the blade). I can remote mount the iso image and do a basic install of centos on these blades, but when I go to do a pxe boot it gives me that error again. I have googled the issue and

You could always use 40-gigabit between the two storage systems which would speed things dramatically, or back to back 56-gigabit IB. ---------------------------------------- From: zfs-discuss-request@opensolaris.org Sent: Monday, March 18, 2013 11:01 PM To: zfs-discuss@opensolaris.org Subject: zfs-discuss Digest, Vol 89, Issue 12 Send zfs-discuss mailing list submissions to

Hi, I've got a possible font problem with a fully updated CentOS 7 system. An example with the man command. #man kill Should return the following KILL(1) User Commands KILL(1) NAME kill - terminate a process SYNOPSIS kill [-s signal|-p] [-q sigval] [-a] [--] pid... kill -l [signal] but what I actually get is the following KILL(1)

I am getting some larger hard drives and will migrate my intranet application onto the new hard drives. I am using CentOS 4. The current setup uses one small boot volume (ext2) and the rest is partitioned into one big LVM. Does it make sense to partition /var/lib/pgsql separately? (thinking mostly in terms of performance) Craig