similar to: [Isolinux] Disk Error 80

I am experiencing a problem booting a machine with ISOLINUX on a machine that has no hard drive (CD-ROM only). I've tried two different machines, a Dell Poweredge 2600 and a Dell Poweredge 1300, both exhibit identical symptoms. When I boot the exact same cd on a system with a hard drive, the boot is just fine. I had been using ISOLINUX 1.66, but I just upgraded to 2.02 and I am having the

Hi, I try to boot some bootcd copy on the hard drive. I read (an try) that it's impossible to boot a cdrom .ISO image . ok So now I "unzip" the .iso into a folder (not a partition ! Because I have lot of .iso), and convert the entry from the isolinux.cfg to a valid grub entry (put in my menu.lst). The iso come from a bootable cd with isolinux. I will make a script for the

Hi, sorry to ask but I could not find any information on that topic. I want to build a cd with isolinux and its boot-menu, but on the cd I have various (small) iso-images as files and I want isolinux to provide me the menu-switching facility between them. Can this be done and if so, how? I managed to have isolinux working with various floppy-images on the cd but ffailed completely with

Hello! I'm trying to boot with a remastered Knoppix 3.4 CD. I burned it with debugging and I get the following output: isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK, drive = 9F isolinux: Loading main image from LBA = DEADBEF0 isolinux: Sectors to load = D5B7 isolinux: Disk error BE, AX = 42F0, drive 9F A don't understand everything in it and I can't find enough

Hallo, I have a little problem with Isolinux. Hi, I would be happy, if they could lend a hand me at my problem! I create a bootable CD, the I-Loader.bin starts the Isolinux.bin, because I don?t like use mkisofs. Isolinux can start an Disketten Image, but not an Eltorito Image like Windos 2000 Cd?s. The error Message is "Invalid or corrupt Kernel Image" WAY? I know, that the file is

Hello SYSLINUX, I have been searching for a resource for the "Disk error" messages coming out of isolinux. I am seeing the message "isolinux: Disk error 20, AX=425 c, drive EF" on many occasions where a combination of questionable Linux OS media comes in contact with touchy LITE-ON DVD/RW Drives attempting to load Red Hat Linux. We know that changing the Drive or

I'm succesfully using isolinux for bootable cd creating, but I want to emulate work with cdrom using hard disk (I have not cd writer at home). Is it possible to use small hard disk as cdrom equivalent? How to do it? I tried using the /dev/hdc1 as output file of isolinux, and after moving disk as primary master and rebooting, bios says that bootrecord is found on IDE-0 and... nothing. It

Hi, recent isolinux versions work fine with current linux kernels on current hardware. But on older hardware there isn't a bootsplash visible at all - like if there isn't a CD in the tray. :( Sadly the older isolinux versions don't work with current kernels (giving me an empty /proc/cmdline for example when using kernel 2.6.23), otherwise I'd just use an old isolinux version of

syslinux-owner at zytor.com: how can i run isolinux on my cf disk? Yuri++?yhuang at i-security.com.cn 2005-12-13

Hi I just grabbed an 8gig thumb drive, took disk 1 centos 4 i386, copied the isolinux directory files to my thumbdrive, then ran syslinux -sf /dev/sdc1 on the device plugged it into my laptop and it does not boot. Is there a step(s) I am missing to get a bootable thumbdrive with centos? Thanks, Jerry

In fact, I discovered that the bug is caused when there is no primary hard disk image (no hard disk 0). When an HD image is created and attached, ISOLINUX works well: ISOLINUX 1.75 2002-06-14 Copyright (C) 1994-2002 H. Peter Anvin isolinux: Starting up, DL = 99 isolinux: Loaded spec packet OK, drive = 99 isolinux: Sector size appears to be 0800 isolinux: Loading main image from LBA = 0000001C

I'm new to the ISOLINUX development cycle, and I've tried a few times to come up with a solution. I'm trying to recompile isolinux.bin to look for the config files in a directory other than root, /boot/isolinux, or /isolinux. Ideally, this directory would be /lpc/isolinux. I've tried changing the plain text values in isolinux.asm to reflect these changes and recompiling using

Hi, I tried to install redhat 8.0 on a laptop and ran into the following problem. ISOLINUX 1.75 2002-06-14 isolinux failed to get sector size, assuming 0800 isolinux: Image checksum error, sorry... At that point, I followed the advice on the isolinux webpage, and reburned a CD using isolinux 2.00 with debug. The error message was: ISOLINUX 2.00 2002-10-25 Copyright (C) 1994-2002 H. Peter

Hi, Is it possible to somehow mix syslinux and isolinux so that I boot from a floppy disk and then load the kernel+initrd from a CD? Reading the docs it seems to me that syslinux and isolinux are quite independent tools, they work differently, the installation method is different etc... so I'm afraid I'll get a negative answer... but I hope I won't :-) Thx, Egmont

I am trying to rebuild Red Hat Linux 9 on DVD. I am using the provided isolinux 2.00 (I tried the latest 2.04, with the same results), and I get an error trying to boot from the DVD. I burned the boot.iso (basically a triple-wide boot disk using the same isolinux directory) to DVD, and it booted fine. The error I get when booting the DVD using isolinux-debug.bin is this (copied by hand):

Hi, some time ago I tried to boot an isolinux boot loader from another one to be able to boot e.g. a Knoppix CD with its original boot loader and menus from a "main" isolinux on a multiboot DVD. This works for isolinux <= 3.07 now! However, newer isolinux boot loaders have some problems and the isolinux (e.g. of the Knoppix CD) loaded from the multiboot DVD's main isolinux

I've created a bootable cd with isolinux but it can't load the kernel. It detects everything fine, decompresses the initrd, loads and decompresses the kernel and then tries to boot the kernel. But after that the computer hangs. Here's the screen dump: ISOLINUX 1.73 2002-05-26 Copyright (C) 1994-2002 H. Peter Anvin isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK,

Deal all, Hi. I'm a new user of isolinux. And I 'm trying to boot a WinXP installation CD with it. I extracted the bootsect, and place it into the same folder together with isolinux.bin. Here's a section of my isolinux.cfg: ... label winxp kernel xpsect.bin ... The boot splash showed fine. Unfortunately when I tried to boot it, I got the following: ISOLINUX 3.11 2005-09-02

Folks I've just tried booting the 1st Linux CD I've made using Isolinux and it fails. At boot time I see: Boot from ATAPI CD-ROM: No Emulation ISOLINUX 1.67 2002-02-03 Copyright (C) 1994-2001 H. Peter Anvin boot: Could not find kernel image: /isolinux The cdimage was made using the command: mkisofs -v -o austin.iso -b isolinux/isolinux.bin -c isolinux/boot.cat

Hello List, I have a problem with an Onborad scsci, that won't boot a isolinux-cd: anyone got a clue? Mainboard is ASUS-CUV4X-DLS with onboard LSI 35c1010-33 Controller. Board-Bios is Award Medaillion 6.0 and Controller Bios is Symbios SDMS v4.0 (4.18.02) The CDRW device to boot from is a Yamaha CRW2100S Rev1.0H I tried Isolinux 1.63 and 1.66 with similar "success": here's