similar to: Other projects using pxelinux.cfg behaviour and architecture detection

Hi, Just thought I'd mention that I spent a while battling with tinc today. I had quite a weird behaviour - in routing mode, tinc would come up fine on both hosts, but pinging hosta from hostb wouldn't work until hosta pinged hostb. I've used an earlier version of tinc before in a different environment with no problems, and vaguely remembered a more complicated tinc-up script, so I

On UML: the klibc architecture is the underlying architecture, so set KLIBCARCH to SUBARCH. Signed-off-by: H. Peter Anvin <hpa at zytor.com> --- commit 018604e070e143657abcf0cb256a1e2dda205d97 tree 1b853903ca6af49d9f437cfd694aec61ef1d488e parent baacd5d81ff7151e8df3893850ec363441886a1e author H. Peter Anvin <hpa at zytor.com> Mon, 15 May 2006 21:25:33 -0700 committer H. Peter Anvin

Thank you for the feedback. > How is this going to work with --target-subarchs? Is there going to be a --no-target-subarchs flag to disable subarchs? What will the semantics of this be, exactly? The large number of subarchs expected makes an inclusive only flag desirable and an exclusive flag impractical. Also, since subarchs will age more quickly than archs, who knows what old crufty

Looks like the subarch tree has been checked in. Does this mean 3.0.1 has been pushed out to include more? Or do we release 3.0.1 once the new tree is fully tested? Jun --- Intel Open Source Technology Center ---- From: xen-changelog-bounces@lists.xensource.com [mailto:xen-changelog-bounces@lists.xensource.com] On Behalf Of Xen patchbot -unstable Sent: Monday, January 30, 2006 4:08 PM To:

A brave attempt to be rid of an unnecessary subarch hook and clean things up a bit. First, all subarches use IRQ-2 as a cascade IRQ. So do that in the common code. Second, there is no need for a pre_intr_init_hook. We can set up the interrupt gates at any time, as this doesn't touch any real hardware, just the processor gates. Now the subarch code still needs to setup the appropriate irq

A brave attempt to be rid of an unnecessary subarch hook and clean things up a bit. First, all subarches use IRQ-2 as a cascade IRQ. So do that in the common code. Second, there is no need for a pre_intr_init_hook. We can set up the interrupt gates at any time, as this doesn't touch any real hardware, just the processor gates. Now the subarch code still needs to setup the appropriate irq

Hi, Keir, Any comments upon following patch? ;-) We need it to further check in a specific configuration file (likely xen0_defconfig_ia64tiger) later to run xen on IA64 tiger box. Currently we have no generic one for all IA64 boxes. Let''s know if better way to do it. Currently custom with tiger box can only get that file out of the tree. Thanks, Kevin >-----Original Message-----

https://bugzilla.mindrot.org/show_bug.cgi?id=2155 Bug ID: 2155 Summary: sftp program has tty attributes setting problem Product: Portable OpenSSH Version: 5.3p1 Hardware: ix86 OS: Linux Status: NEW Severity: critical Priority: P5 Component: sftp Assignee: unassigned-bugs at

Hello LLVMdev!! Yesterday I posted a patch request to the llvm-commits list requesting that someone could apply a patch to Triple.h and Triple.cpp for me. I didn't get any response so I wondered whether I should have posted to this list instead. My story is as follows: we are trying to get lldb/llvm support for CSRs range of Kalimba DSPs. Eventually we are planning to hire someone to

Hi friends... I am using pxelinux but it is so slow when I don't write MAC addresses in /etc/dhcp3/dhcpd.conf so How do I can use pxelinux.cfg/default directly and not have to wait? A lot of thanks. {pepo} -- Linux User Registered #232544 Jabber : pepo at jabberes.org ICQ : 337889406 GnuPG-key : www.keyserver.net ----------------

Hi All, It appears the NetApp OnTap tftp server we were using doesn't implement the "OpCode: Error Code (5); Error Code: File not found (1)" response." so we just moved the tftp service to RHEL boxes running HPA tftpd. It's essential for our deployment system to locate the pxelinux config specific to an installation request based on it's MAC address. If the MAC based

Hi there, I've done an apt-get source linux-image-2.6.18-4-xen-686 and would very much like to build a package with NFS root enabled. From what I've read, I need to run split-config, which I got from SVN (it doesn't seem to exist anywhere else) I've fooled around with split-config to produce a config to my spec but this doesn't seem to actually work. Usage:

Tags: patch fixed-upstream Patch below allows this package to be built on ia64. Xen has supported ia64 since ~3.0.1. Thanks, Alex diff -urN a/xen-3.0-3.0.4-1/debian/arch/defines b/xen-3.0-3.0.4-1/debian/arch/defines --- a/xen-3.0-3.0.4-1/debian/arch/defines 2007-07-17 12:40:58.000000000 -0600 +++ b/xen-3.0-3.0.4-1/debian/arch/defines 2007-07-17 12:41:17.000000000 -0600 @@ -5,3 +5,4 @@

Hi, Is there anything that controls the speed with which pxelinux.0 (4.03) enumerates the files in .../pxelinux.cfg before it reaches the .../pxelinux.cfg/default file ? pxelinux.cfg/01-00-50-56-ba-48-0e pxelinux.cfg/AC12B2D9 pxelinux.cfg/AC12B2D pxelinux.cfg/AC12B2 pxelinux.cfg/AC12B pxelinux.cfg/AC12 pxelinux.cfg/AC1 pxelinux.cfg/AC

> On Tue, 2006-07-18 at 00:00 -0700, Chris Wright wrote: > > plain text document attachment (i386-setup) > > Implement the start-of-day subarchitecture setup hooks for booting on > > Xen. Add subarch macros for determining loader type and initrd > > location. > > > diff -r a5848bce3730 arch/i386/kernel/setup.c > > --- a/arch/i386/kernel/setup.c Thu Jun 22

Hello, We are trying to use 'PXELINUX' for network boot with root file system on ramdisk, the kernel image vmlinuz and compressed root file system rootfs.img.gz are both present in /tftpboot directory PXELINUX client (pxelinux.0) requests and gets the config file AC134D6D from the TFTP server (which supports tsize option) contents are as follows timeout 10 prompt 1 label linux-new

Hi! I have a PXE Server witch uses a the simple menu system. Is all working great also with submenus. What i want is a entry in the pxelinux.cfg/default file that can load a non-menu cfg file for the pxelinux.0. The background is, that i have here a DamnSmallLinux that is booting from PXE. it has a own cfg file but without the simple menu system (with F1-F2-F3 and a logo.16). If i move

Good day again Michael, You might potentially be interested in linux.c32, as well. Whether you use IPAPPEND or linux.c32, either way I believe that you have to customize the distro to make use of the passed parameters. If you take a look at syslinux/com32/modules/linux.c, you will see that this COMBOOT32 module accepts "-dhcpinfo" as an argument. The behaviour here is that linux.c32

Hello, THE PLAN: a cross-plattform unattended setup system for linux and windows on a RH72 box with PXE, ISC-DHCP2 and TFTP. Lanboot should be offered with linuxinstall and a dos6.22 LANMAN 3.0 bootdisk + djgpp bash for scripting (see http://unattended.sourceforge.net) THE PROBLEM: DOS Utilities force reboot after partitioning. By then the decision if the bootimage or the HD should be booted

Dear Sir, I am using PXES for booting diskless computer to win2k, and/or LTSP servers. The problem is we have many computers in our lab have different computers, so i require different .initrd files for each group of computers. Can i have different /pxelinux.cfg/default files so that i can define different locations for my boot files. Thanks in advance. Limesh Parekh, Enjay Computer