similar to: kernel-2.6.18-8.1.14 + lustre 1.6.4.2 + OFED 1.2

This morning I''ve had both my infiniband and tcp lustre clients hiccup. They are evicted from the server presumably as a result of their high load and consequent timeouts. My question is- why don''t the clients re-connect. The infiniband and tcp clients both give the following message when I type "df" - Cannot send after transport endpoint shutdown (-108). I''ve

I am trying to compile lustre-1.6.6 against ofed-1.4 using following configure options : ./configure --disable-server --with-o2ib=/usr/src/ofa_kernel-1.4 --with-linux=/usr/src/kernels/2.6.18-92.el5-x86_64 I am getting following errors: configure: error: can''t compile with OpenIB gen2 headers under /usr/src/ofa_kernel-1.4 Is it that lustre-1.6.6 will only work with ofed-1.3. or I am

Hello, I am having trouble installing the server modules for lustre 2.1.4 and use mellanox''s OFED distribution so we may use infiniband. Would you folks look at my procedure and results below and let me know what you think? Thanks very much! The mellanox ofed installation builds and installs some kernel modules too, so I used this method to ensure OFED compiled against the correct

Hi all, I''m getting my feet wet in the infiniband lake and of course I run into some problems. It would seem I got the compilation part of sles11 kernel 2.6.27 + Lustre 1.8.3 + ofed 1.4.2 right, because it allows me to see and use the infiniband fabric, and because ko2iblnd loads without any complaints. In /etc/modprobe.d/lustre (this is a Debian system, hence this subdir of

In IRC today, someone who was hitting that same IB performance ceiling that occasionally gets reported had this to say [11:50] <nissim> first, I ran fedora which is not supported by Mellanox OFED distro [11:50] <nissim> so I moved to CentOS 6.3 [11:51] <nissim> next I removed all distibution related infiniband rpms and build the latest OFED package [11:52] <nissim>

Configure fails at testing for openib - anyone an idea? Thanks Michaell configure:10034: checking whether to enable OpenIB gen2 support configure:10138: cp conftest.c build && make -d modules CC=gcc -f /home/mhebenst/lustre-2.3.0/build/Makefile LUSTRE_LINUX_CONFIG=/adm in/extra/linux-2.6.32-358.2.1.el6.x86_64.crt1/.config LINUXINCLUDE= -I/usr/local/ofed/3.5/src/compat-rdma-3.5/include

Hey guys, So, we're testing Gluster RDMA storage, and are having some issues. Things are working...just not as we expected them. THere isn't a whole lot in the way, that I've foudn on docs for gluster rdma, aside from basically "install gluster-rdma", create a volume with transport=rdma, and mount w/ transport=rdma.... I've done that...and the IB fabric is known to be

We have a new install of CentOS 6.7 with infiniband support installed. We can see the card in hardware and we can see the mlx4 drivers loaded in the kernel but cannot see the card as an ethernet interface, using ifconfig -a. Can you recommend an install procedure to see this as an ethernet interface? Thanks On 05/25/2016 07:32 AM, Fabian Arrotin wrote: > On 25/05/16 03:08, Pat Haley

It seems that lustre puts its modules in /lib/modules/2.6.16.21-0.8-default despite the fact that my kernel is 2.6.16.21-0.8-smp ! uname -a Linux n32 2.6.16.21-0.8-smp #4 SMP Sun Sep 24 08:47:30 BST 2006 i686 i686 i386 GNU/Linux make[3]: Nothing to be done for `install-exec-am''. /bin/sh ../../mkinstalldirs /lib/modules/2.6.16.21-0.8-default/kernel/fs/lustre /usr/bin/install -c -m 644

Hi, I am having problem to bring up the network using lustre 1.6.4.1 (2.6.18-8) with OFED-1.3 (InfiniBand). When I run lctl network up, I''m getting the following: LNET configure error 100: Network is down dmesg shows: LustreError: 21080:0:(api-ni.c:1025:lnet_startup_lndnis()) Can''t load LND o2ib, module ko2iblnd, rc=256 Note that the InfiniBand IPoIB network is working properly

on our cluster that has been running lustre for about 1 month. I have 1 MDT/MGS and 1 OSS with 2 OST''s. Our cluster uses all Gige and has about 608 nodes 1854 cores. We have allot of jobs that die, and/or go into high IO wait, strace shows processes stuck in fstat(). The big problem is (i think) I would like some feedback on it that of these 608 nodes 209 of them have in dmesg

Hi all, At long last, Lustre 1.6.5 is available on the Sun Download Center Site. http://www.sun.com/software/products/lustre/get.jsp The change log and release notes can be read here: http://wiki.lustre.org/index.php?title=Change_Log_1.6 Thank you for your assistance; as always, you can report issues via Bugzilla (https://bugzilla.lustre.org/) Happy downloading! -- The Lustre Team --

Hi all, At long last, Lustre 1.6.5 is available on the Sun Download Center Site. http://www.sun.com/software/products/lustre/get.jsp The change log and release notes can be read here: http://wiki.lustre.org/index.php?title=Change_Log_1.6 Thank you for your assistance; as always, you can report issues via Bugzilla (https://bugzilla.lustre.org/) Happy downloading! -- The Lustre Team --

Hello, I have been playing with the XCP for a while now, and must say I''m very exited about the technology. I had no prior experience with Xen so it has taken me a while to understand the concepts, but now I feel most important issues are solved and I''ve purchased some hardware to build my (tiny) cloud on. The box is a Supermicro 1026TT-IBXF, so I have 2 x Ethernet and 1 x

Hello I''ve noticed that Lustre network error, especially LND errors, are considered as maskable errors. That means that on a production node, where debug mask is 0, those specific errors won''t be displayed if they happened. Does that mean that they are harmless? Do upper-layers resend their RPC/packet if LNDs report an error? When, in my case, o2iblnd says something like

Hello I''ve noticed that Lustre network error, especially LND errors, are considered as maskable errors. That means that on a production node, where debug mask is 0, those specific errors won''t be displayed if they happened. Does that mean that they are harmless? Do upper-layers resend their RPC/packet if LNDs report an error? When, in my case, o2iblnd says something like

Hi, I found a link: http://xenbits.xensource.com/ext/xen-smartio.hg for Xen-IB source codes, but it did''t exist anymore. Are there other ways to get the Xen-IB source codes? Thanks. Regards, Yi-Man _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel

I am running XCP 0.5. I have an InfiniBand network in place that I would like to use to connect to my NFS server for VM image storage. Has anybody tried getting IB to work with XCP? Is there a document that outlines the steps for getting IB to work with XCP? Also, I don''t need to expose the IB network to any of the domU. I only want to use the IB network to connecting to NFS based

Hello, I''ve several problems with quota on our testcluster: When I set the quota for a person to a given value (e.g. the values which are provided in the operations manual), I''m able to write exact the amount which is set with setquota. But when I delete the files(file) I''m not able to use this space again. Here is what I''ve done in detail: lfs checkquota

Hi- I'm new to Gluster, but am trying to get it set up on a new compute cluster we're building. We picked Gluster for one of our cluster file systems (we're also using Lustre for fast scratch space), but the Gluster performance has been so bad that I think maybe we have a configuration problem -- perhaps we're missing a tuning parameter that would help, but I can't find