similar to: lctl deactivate questions

I installed 1 MDS , 2 OSS/OST and 2 Lustre Client. My MDS shows: [code] [root at MDS ~]# lctl list_nids 10.94.214.185 at tcp [root at MDS ~]# [/code] On Lustre Client1: [code] [root at lustreclient1 lustre]# lfs df -h UUID bytes Used Available Use% Mounted on lustre-MDT0000_UUID 4.5G 274.3M 3.9G 6% /mnt/lustre[MDT:0] lustre-OST0000_UUID

I installed 1 MDS , 2 OSS/OST and 2 Lustre Client. My MDS shows: [code] [root at MDS ~]# lctl list_nids 10.94.214.185 at tcp [root at MDS ~]# [/code] On Lustre Client1: [code] [root at lustreclient1 lustre]# lfs df -h UUID bytes Used Available Use% Mounted on lustre-MDT0000_UUID 4.5G 274.3M 3.9G 6% /mnt/lustre[MDT:0]

Chris, Perhaps you need to perform some write_conf like command. I''m not sure if this is needed in 1.6 or not. Shane ----- Original Message ----- From: lustre-discuss-bounces at lists.lustre.org <lustre-discuss-bounces at lists.lustre.org> To: lustre-discuss <lustre-discuss at lists.lustre.org> Sent: Fri Mar 07 12:03:17 2008 Subject: Re: [Lustre-discuss] Multihomed

Hi I want my lustre do such things during OST failed: if some file has stripe data on th failed OST, any operation on the file will return IO error without blocking, and also at this moment I can create and read/write new file or read/write files which have no stripe data on the failed OST without blocking. What should I do ? How to configure? thanks! swin -------------- next part

All, I''ve added a new 2.2 TB OST to my cluster easily enough, but this new disk array is meant to replace several smaller OSTs that I used to have of which were only 120 GB, 500 GB, and 700 GB. Adding an OST is easy, but how do I REMOVE the small OSTs that I no longer want to be part of my cluster? Is there a command to tell luster to move all the file stripes off one of the nodes?

Greetings! I am working with Lustre-2.1.2 on RHEL 6.2. First I configured it using the standard defaults over TCP/IP. Everything worked very nicely usnig a real, static --mgsnode=a.b.c.x value which was the actual IP of the MGS/MDS system1 node. I am now trying to integrate it with Pacemaker-1.1.7. I believe I have most of the set-up completed with a particular exception. The "lctl

Hi, Our lustre environment is: 2.6.9-55.0.9.EL_lustre.1.6.3smp I would like to change recovery timeout from default value 250s to something longer I tried example from manual: set_timeout <secs> Sets the timeout (obd_timeout) for a server to wait before failing recovery. We performed that experiment on our test lustre installation with one OST. storage02 is our OSS [root at

Hello, lfs prints different obd(idx) compared to lctl dl. We use single striping. cluster1 tmp # lfs find --obd scia-OST0017_UUID /data/scia/L0/V0.00/20100327/SCI_NL__0PNPDE20100327_193441_000040582088_00071_42209_1158.N1 /data/scia/L0/V0.00/20100327/SCI_NL__0PNPDE20100327_193441_000040582088_00071_42209_1158.N1 cluster1 tmp # lfs getstripe

OK, so our old MDS had hardware issues so I configured a new MGS / MDS on a VM (this is a backup lustre filesystem and I wanted to separate the MGS / MDS from OSS of the previous), and then did this: For example: mount -t ldiskfs /dev/old /mnt/ost_old mount -t ldiskfs /dev/new /mnt/ost_new rsync -aSv /mnt/ost_old/ /mnt/ost_new # note trailing slash on ost_old/ If you are unable to connect both

Hi, We run four-node Lustre 2.3, and I needed to both change hardware under MGS/MDS and reassign an OSS ip. Just the same, I added a brand new 10GE network to the system, which was the reason for MDS hardware change. I ran tunefs.lustre --writeconf as per chapter 14.4 in Lustre Manual, and everything mounts fine. Log regeneration apparently works, since it seems to do something, but

Hello, When I run a "df -i" in my clients I get 95% indes used or 5% inodes free: Filesystem Inodes IUsed IFree IUse% Mounted on lustre-mds-01:lustre-mds-02:/cetafs 22200087 20949839 1250248 95% /mnt/data But if I run lfs df -i i get: UUID Inodes IUsed IFree I

Hello, We have running lustre 1.8.1 and have met "No space lest on device" error when uploading 500 Gb small files (less then 100 Kb each). The problem seems to depends on the number of files. If we remove one file, we can create one new file, even with Gb size; but if we haven''t remove something we can''t create even very little file, as an example using touch

Hi all, we use SLES 11 and Lustre 1.8.1.1 + patches and like convert a lustre FS using external journals to one with async journals enabled. Question is whether the procedure: umount <filesystem> on all clients umount <osts> on all OSSes e2fsck <ost-device> on all OSSes for all all OSTs tune2fs -O ^has_journal <ost-device> on all

Hi! We''ve started to poke and prod at Lustre 1.6.4.1, and it seems to mostly work (we haven''t had it OOPS on us yet like the earlier 1.6-versions did). However, we had this weird incident where an active client (it was copying 4GB files and running ls at the time) got evicted by the MDS and all OST''s. After a while logs indicate that it did recover the connection

on our cluster that has been running lustre for about 1 month. I have 1 MDT/MGS and 1 OSS with 2 OST''s. Our cluster uses all Gige and has about 608 nodes 1854 cores. We have allot of jobs that die, and/or go into high IO wait, strace shows processes stuck in fstat(). The big problem is (i think) I would like some feedback on it that of these 608 nodes 209 of them have in dmesg

I''m evaluating lustre. I''m trying what I think is a basic/simple ethernet config. with MDT and OST on the same node. Can someone tell me if the following (~150 second recovery occurring when small 190 GB OST is re-mounted) is expected behavior or if I''m missing something? I thought I would send this and continue with the eval while awaiting a response. I''m using

Hello, I''ve several problems with quota on our testcluster: When I set the quota for a person to a given value (e.g. the values which are provided in the operations manual), I''m able to write exact the amount which is set with setquota. But when I delete the files(file) I''m not able to use this space again. Here is what I''ve done in detail: lfs checkquota

Hi all, I''m getting my feet wet in the infiniband lake and of course I run into some problems. It would seem I got the compilation part of sles11 kernel 2.6.27 + Lustre 1.8.3 + ofed 1.4.2 right, because it allows me to see and use the infiniband fabric, and because ko2iblnd loads without any complaints. In /etc/modprobe.d/lustre (this is a Debian system, hence this subdir of

Hi all, after installing a Lustre test file system consisting of 34 OSTs, I encountered a strange error when trying to set up quotas: lfs quotacheck gave me an "Input/Output error", while in /var/log/kern.log I found a Lustre error LustreError: 20807:0:(quota_check.c:227:lov_quota_check()) lov idx 32 inactive Indeed, in /proc/fs/lustre/lov/.../target_obd all 34 OSTs were listed

Hello, I have recently installed a lustre cluster which is in a test phase now but will potentially be in 24x7 production if its accepted. I would like input from the list on what the recommendations/best practices are for configuration of a lustre cluster startup. Is it advisable to have lustre on the various server pieces (mgs/mdt/oss''s) start automatically? If not why not?