similar to: fsck ldiskfs-backed OSTs?

Our current Lustre servers run the version 1.8.1.1 with the regular ldiskfs. We are looking to expand our Lustre file system with new servers/storage and upgrade to all the lustre servers to 1.8.4 as well at the same time. We would like to make use of the ldiskfs-ext4 on the new servers to use larger OSTs. I just want to confirm the following facts: 1. Is is possible to run different versions

Hi I want my lustre do such things during OST failed: if some file has stripe data on th failed OST, any operation on the file will return IO error without blocking, and also at this moment I can create and read/write new file or read/write files which have no stripe data on the failed OST without blocking. What should I do ? How to configure? thanks! swin -------------- next part

We are seeing some disturbing (probably due to our ignorance) behavior from lustre 1.6.3 right now. We have 8 OSSs with 3 OSTs per OSS (24 physical LUNs). We just created a brand new lustre file system across this configuration using the default mkfs.lustre formatting options. We have this file system mounted across 400 clients. At the moment, we have 63 IOzone threads running

Hello, We had a problem with our disk controller that required a reboot. 2 of our OSTs remounted and went through the recovery window but clients hang trying to access them. Also /proc/fs/lustre/obdfilter/$UUID/ is empty for that OST UUID. LDISKFS FS on dm-5, internal journal on dm-5:8 LDISKFS-fs: delayed allocation enabled LDISKFS-fs: file extents enabled LDISKFS-fs: mballoc enabled

Hello, When I run a "df -i" in my clients I get 95% indes used or 5% inodes free: Filesystem Inodes IUsed IFree IUse% Mounted on lustre-mds-01:lustre-mds-02:/cetafs 22200087 20949839 1250248 95% /mnt/data But if I run lfs df -i i get: UUID Inodes IUsed IFree I

Hello, we wounder whether is it possible to add OSTs to the Lustre with quota support without making it offline? We tried to do this but all quota information was lost. Despite the fact that OST was formatted with quota support we are receiving this error message: Lustre: 3743:0:(lproc_quota.c:447:lprocfs_quota_wr_type()) lustrefs-OST0016: quotaon failed because quota files

Greetings-- Packages for Lustre 1.0.2 are now available in the usual place http://www.clusterfs.com/download.html This bug-fix release resolves a number of issues, of which a few are user-visible: - the default debug level is now a more reasonable production value - zero-copy TCP is now enabled by default, if your hardware supports it - you should encounter fewer allocation failures

Greetings-- Packages for Lustre 1.0.2 are now available in the usual place http://www.clusterfs.com/download.html This bug-fix release resolves a number of issues, of which a few are user-visible: - the default debug level is now a more reasonable production value - zero-copy TCP is now enabled by default, if your hardware supports it - you should encounter fewer allocation failures

In 1.6.0, when creating a MDT, you could specify multiple --mgsnode options and it would failover between them. 1.6.3 only seems to take the last one and --mgsnode=192.168.1.252 at o2ib:192.168.1.253 at o2ib doesn''t seem to failover to the other node. Any ideas how to get around this? Robert Robert LeBlanc College of Life Sciences Computer Support Brigham Young University leblanc at

OK, so our old MDS had hardware issues so I configured a new MGS / MDS on a VM (this is a backup lustre filesystem and I wanted to separate the MGS / MDS from OSS of the previous), and then did this: For example: mount -t ldiskfs /dev/old /mnt/ost_old mount -t ldiskfs /dev/new /mnt/ost_new rsync -aSv /mnt/ost_old/ /mnt/ost_new # note trailing slash on ost_old/ If you are unable to connect both

All, I''ve added a new 2.2 TB OST to my cluster easily enough, but this new disk array is meant to replace several smaller OSTs that I used to have of which were only 120 GB, 500 GB, and 700 GB. Adding an OST is easy, but how do I REMOVE the small OSTs that I no longer want to be part of my cluster? Is there a command to tell luster to move all the file stripes off one of the nodes?

Anyone have any experience with MpiBlast and Lustre. We have MpiBlast-1.4.0-pio and lustre-1.6.3 and we are seeing some pretty poor performance with most of the mpiblast threads spending 20% to 50% of their time in disk wait. We have the genbank nt database split into 24 fragments (one for each of our OSTs, 3 per OSS). The individual fragments are not striped due to the

Hello, I''ve several problems with quota on our testcluster: When I set the quota for a person to a given value (e.g. the values which are provided in the operations manual), I''m able to write exact the amount which is set with setquota. But when I delete the files(file) I''m not able to use this space again. Here is what I''ve done in detail: lfs checkquota

Hi Folks, We can see these massages on our MDS Feb 12 12:46:08 mds01 kernel: LDISKFS-fs warning (device dm-0): empty_dir: bad directory (dir #31452569) - no `.'' or `..'' Feb 12 12:46:08 mds01 kernel: LDISKFS-fs warning (device dm-0): ldiskfs_rmdir: empty directory has too many links (3) It seem to indicate that we have bad(corrupted) directory. Do you have any idea how to

I''m evaluating lustre. I''m trying what I think is a basic/simple ethernet config. with MDT and OST on the same node. Can someone tell me if the following (~150 second recovery occurring when small 190 GB OST is re-mounted) is expected behavior or if I''m missing something? I thought I would send this and continue with the eval while awaiting a response. I''m using

Hi everyone, I have seen this question here before, but without a very satisfactory answer. One of our half a dozen clients has lost access to a set of OSTs: > lfs osts OBDS:: 0: lustre-OST0000_UUID ACTIVE 1: lustre-OST0001_UUID ACTIVE 2: lustre-OST0002_UUID INACTIVE 3: lustre-OST0003_UUID INACTIVE 4: lustre-OST0004_UUID INACTIVE 5: lustre-OST0005_UUID ACTIVE 6: lustre-OST0006_UUID ACTIVE

Hi, Our lustre environment is: 2.6.9-55.0.9.EL_lustre.1.6.3smp I would like to change recovery timeout from default value 250s to something longer I tried example from manual: set_timeout <secs> Sets the timeout (obd_timeout) for a server to wait before failing recovery. We performed that experiment on our test lustre installation with one OST. storage02 is our OSS [root at

Hi, I''m seeing what can only be described as dismal striped write performance from lustre 1.6.3 clients :-/ 1.6.2 and 1.6.1 clients are fine. 1.6.4rc3 clients (from cvs a couple of days ago) are also terrible. the below shows that the OS (centos4.5/5) or fabric (gigE/IB) or lustre version on the servers doesn''t matter - the problem is with the 1.6.3 and 1.6.4rc3 client kernels

Is there instructions on how to use the patchless client on RHEL4 ? For version 1.6.2 We would prefer a rpm, but we are not scared of doing a build if needed. Brock Palen Center for Advanced Computing brockp at umich.edu (734)936-1985

Hello everybody, at the following pages: http://www.rit.edu/~rc/docs/Survey_of_Clustered_Parallel_File_Systems_004_LANL.ppt http://www.intel.com/cd/ids/developer/asmo-na/eng/dc/tools/threading/238284.htm?page=2 I read: "[...] Currently, one additional drawback to Lustre is that a Lustre client cannot be on a server that is providing OSTs. This solution is being worked on and may be