similar to: llog_origin_handle_cancel and other LustreErrors

Has anyone ever seen this happen when using rsync ? I'm trying to send a series of =~ 300k files down the line, but for some reason, rsync thinks each file is 17592186044416 bytes long! The same behaviour occurs when using rsync to copy files locally. Partial output follows...any help appreciated! Cheers, P [root@grappa llog]# ls -al /IFX/llog/logs.109051.gz -rw-rw---- 1 informix

I''m a Lustre newbie who just joined this list. I''d appreciate any help on the following Lustre 2.4 issue I''m running into: Every time I mount the MDT, the mount appears to succeed but /var/log/messages contains the message: "LustreError: 11-0: lustre-MDT0000-lwp-MDT0000: Communicating with 0@lo, operation mds_connect failed with -11". The MDT uses 4 local

There must be a very basic thing I am not getting... I'm working with some entropy functions and the convention is to use log(0)=0. So I wrote a function: llog<-function(x){ if (x ==0) 0 else log(x) } which seems to work fine for individual numbers e.g. >llog(0/2) [1] 0 but if I try whole vectors or tables: p<-c(4,3,1,0) q<-c(2,2,2,2) llog(p/q) I get this: [1] 0.6931472

Dear All, Yesterday evening or cluster has stopped. Two of our nodes tried to take the resource from each other, they haven''t seen the other side, if I saw well. I stopped heartbeat, resources, start it again, and back to online, worked fine. This morning I saw this in logs: Feb 22 03:25:07 node4 kernel: Lustre: 7:0:(linux-debug.c:98:libcfs_run_upcall()) Invoked LNET upcall

Hello. OS CentOS 5.4 uname -a Linux oss0 2.6.18-128.7.1.el5_lustre.1.8.1.1 #1 SMP Tue Oct 6 05:48:57 MDT 2009 x86_64 x86_64 x86_64 GNU/Linux Lustre 1.8.1.1 OSS server. A lot of errors in /var/log/messages: Aug 10 14:46:34 oss0 kernel: LustreError: 2802:0:(client.c:775:ptlrpc_import_delay_req()) Skipped 1 previous similar message Aug 10 15:07:01 oss0 kernel: LustreError:

Hi! We''ve started to poke and prod at Lustre 1.6.4.1, and it seems to mostly work (we haven''t had it OOPS on us yet like the earlier 1.6-versions did). However, we had this weird incident where an active client (it was copying 4GB files and running ls at the time) got evicted by the MDS and all OST''s. After a while logs indicate that it did recover the connection

Chris, Perhaps you need to perform some write_conf like command. I''m not sure if this is needed in 1.6 or not. Shane ----- Original Message ----- From: lustre-discuss-bounces at lists.lustre.org <lustre-discuss-bounces at lists.lustre.org> To: lustre-discuss <lustre-discuss at lists.lustre.org> Sent: Fri Mar 07 12:03:17 2008 Subject: Re: [Lustre-discuss] Multihomed

Hi, Our environment is: 2.6.9-55.0.9.EL_lustre.1.6.3smp I am getting following errors from two OSS''s ... Nov 7 10:39:51 storage09.beowulf.cluster kernel: LustreError: 23045:0:(client.c:519:ptlrpc_import_delay_req()) @@@ IMP_INVALID req at 00000100b410be00 x4190687/t0 o101->MGS at MGC10.143.245.201@tcp_0:26 lens 232/240 ref 1 fl Rpc:/0/0 rc 0/0 Nov 7 10:39:51

Hi, list: I''m trying configure lustre with: 1 MGS -------------> 192.168.3.100 with mkfs.lustre --mgs /dev/md1 ; mount -t lustre ... 1 MDT ------------> 192.168.3.101 with mkfs.lustre --fsname=datafs00 --mdt --mgsnode=192.168.3.100 /dev/sda3 ; mount -t lustre ... 4 ost -----------> 192.168.3.102-104 with mkfs.lustre --fsname=datafs00 --ost --mgsnode=192.168.3.100 at tcp0

I''m seeing this error message on one of my OSS''s but not the other three. Any idea what is causing it? Oct 25 13:58:56 oss2 kernel: LustreError: 3228:0:(client.c:519:ptlrpc_import_delay_req()) @@@ IMP_INVALID req at f6b13200 x18040/t0 o101->MGS at MGC192.168.0.200@tcp_0:26 lens 176/184 ref 1 fl Rpc:/0/0 rc 0/0 Oct 25 13:58:56 oss2 kernel: LustreError:

Hi everyone, I have seen this question here before, but without a very satisfactory answer. One of our half a dozen clients has lost access to a set of OSTs: > lfs osts OBDS:: 0: lustre-OST0000_UUID ACTIVE 1: lustre-OST0001_UUID ACTIVE 2: lustre-OST0002_UUID INACTIVE 3: lustre-OST0003_UUID INACTIVE 4: lustre-OST0004_UUID INACTIVE 5: lustre-OST0005_UUID ACTIVE 6: lustre-OST0006_UUID ACTIVE

Hi, On a few of the hpc cluster nodes, i am seeing a new lustre error that is pasted below. The volumes are working fine and there is nothing on the oss and mds to report. LustreError: 5080:0:(import.c:607:ptlrpc_connect_interpret()) data3-OST0000_UUID at 192.168.2.98@tcp changed handle from 0xfe51139158c64fae to 0xfe511392a35878b3; copying, but this may foreshadow disaster

Hi, i just want to know whether there are any alternative file systems for HP SFS. I heard that there is Cluster Gateway from Polyserve. Can anybody plz help me in finding more abt this Cluster Gateway. Thanks and Regards, Ashok Bharat -----Original Message----- From: lustre-discuss-bounces at lists.lustre.org on behalf of lustre-discuss-request at lists.lustre.org Sent: Tue 2/12/2008 3:18 AM

Hello All, I have installed and configured Lustre 1.8.4 on SuSe 11.0 and everything works fine if i run modprobe lustre and when the lustre module is getting loaded. But when the server reboots it is not getting loaded. Kindly help. Lnet is configured in /etc/modprobe.conf.local as below. options lnet networks=tcp0(eth0) accept=all For loading lustre module i tried including lustre module in

Dear All, I try to use our cluster though samba share. Everything work fine, but I think, we should have -o flock at lustre mount time. Great, it''s work. But when I want to save a file on the share, I get this on the logs: Jan 31 10:45:24 opteron-ren-11 kernel: LustreError: 24836:0:(file.c:2309:ll_file_flock()) unknown fcntl lock type: 32 Jan 31 10:45:24 opteron-ren-11 kernel:

Hello. I'm trying to use opus-tools on Android to encode wav data but I couldn't build it. I need to resample my raw data so opusenc does its job. Is it possible to use opus-tools on Android? OPUS is the first citizen in my app but not sure which flags I need to add to build this. LOCAL_CFLAGS := -w -std=gnu99 -O2 -DNULL=0 -DSOCKLEN_T=socklen_t -DLOCALE_NOT_USED -D_LARGEFILE_SOURCE=1

Hi Opus Experts, I am working on a JNI library which depends on libopusenc which in turn depends on libopus. However, during runtime, I encountered a linking error while loading the library: java.lang.UnsatisfiedLinkError: dlopen failed: cannot locate symbol "opus_projection_encoder_ctl" referenced by "libopusenc.so" Here is how to reproduce the issue: Build procedure

Hi all, after installing a Lustre test file system consisting of 34 OSTs, I encountered a strange error when trying to set up quotas: lfs quotacheck gave me an "Input/Output error", while in /var/log/kern.log I found a Lustre error LustreError: 20807:0:(quota_check.c:227:lov_quota_check()) lov idx 32 inactive Indeed, in /proc/fs/lustre/lov/.../target_obd all 34 OSTs were listed

This is the strangest problem I have seen. I have a lustre filesystem mounted on a linux server and its being exported to various alpha systems. The alphas mount it just fine however under heavy load the NFS server stops responding, as does the lustre mount on the export server. The weird thing is that if i mount the nfs export on another nfs server and run the same benchmark (bonnie) everything

Hello, I''m not sure about this, when a device is set read-only, are journal commit still allowed then, or is this the reason, why the umount hangs forever? [44825.302262] LustreError: Skipped 572 previous similar messages [44882.668079] Lustre: Failing over pfs1work-OST0026 [44882.674578] Lustre: *** setting obd pfs1work-OST0026 device ''unknown-block(9,7)'' read-only