similar to: [PATCH node][REPOST 1/2] Fix uninstall to detect and cleanup correct partitions

Use findfs LABEL=ABC and mount LABEL=ABC instead. Signed-off-by: Mike Burns <mburns at redhat.com> --- scripts/ovirt-config-boot | 29 ++++++++++++++++------------- scripts/ovirt-config-storage | 2 -- scripts/ovirt-functions | 18 ++++++++++-------- 3 files changed, 26 insertions(+), 23 deletions(-) diff --git a/scripts/ovirt-config-boot b/scripts/ovirt-config-boot index

This lays the groundwork for setting Root and RootBackup onto individual partitions for multiple disk installations in the future. Install, removal, upgrade testing has been performed and all seems to work at this point. --- scripts/ovirt-config-boot | 15 ++++++++------- scripts/ovirt-config-storage | 28 +++++++++++++++------------- scripts/ovirt-config-uninstall | 2 ++

This patch fixes both local installation and iscsi installation issues --- scripts/ovirt-config-boot | 10 ++++++---- scripts/ovirt-config-networking | 8 +++++--- scripts/ovirt-config-storage | 17 ++++++++++++++++- scripts/ovirt-functions | 27 ++++++++++++++++++--------- 4 files changed, 45 insertions(+), 17 deletions(-) diff --git a/scripts/ovirt-config-boot

Quote everywhere that we reference wwid in o-c-storage, o-c-boot and ovirt-functions. Signed-off-by: Mike Burns <mburns at redhat.com> --- scripts/ovirt-config-boot | 6 +- scripts/ovirt-config-storage | 178 +++++++++++++++++++++--------------------- scripts/ovirt-functions | 38 +++++----- 3 files changed, 111 insertions(+), 111 deletions(-) diff --git

Previous implementation had staticly defined partitions to remove. This would break in the case of split Root and HostVG devices. Signed-off-by: Mike Burns <mburns at redhat.com> --- scripts/ovirt-config-boot | 11 +-------- scripts/ovirt-config-uninstall | 49 ++++++++++++++++++++++++--------------- scripts/ovirt-functions | 27 ++++++++++++++++++++++ 3 files changed, 58

- dracut does not currently support booting a dmsquash file system on an iscsiroot - can not be configured in standalone mode since networking is not up, although works fine if ovirt-config-setup is run once booted. Signed-off-by: Joey Boggs <jboggs at redhat.com> --- recipe/common-pkgs.ks | 1 + scripts/ovirt-config-boot | 67 ++++++++++++++++----

--- scripts/ovirt-config-boot | 13 +++++++- scripts/ovirt-config-storage | 73 +++++++++++++++++++++++++---------------- 2 files changed, 56 insertions(+), 30 deletions(-) diff --git a/scripts/ovirt-config-boot b/scripts/ovirt-config-boot index d545878..8cc127b 100755 --- a/scripts/ovirt-config-boot +++ b/scripts/ovirt-config-boot @@ -29,6 +29,12 @@ ovirt_boot_setup() { local disk2

Previous implementation had staticly defined partitions to remove. This would break in the case of split Root and HostVG devices. Signed-off-by: Mike Burns <mburns at redhat.com> --- scripts/ovirt-config-boot | 11 +-------- scripts/ovirt-config-uninstall | 48 ++++++++++++++++++++++++--------------- scripts/ovirt-functions | 33 +++++++++++++++++++++++++++ 3 files

--- scripts/install.py | 247 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 247 insertions(+), 0 deletions(-) create mode 100755 scripts/install.py diff --git a/scripts/install.py b/scripts/install.py new file mode 100755 index 0000000..ddffb53 --- /dev/null +++ b/scripts/install.py @@ -0,0 +1,247 @@ +#!/usr/bin/python +# +# install.py - configure local boot/root disk

This patch fixes a few problems encountered with installing to an iscsi backed root partition as well as a normal local disk install. --- scripts/ovirt-config-boot | 10 ++++++---- scripts/ovirt-config-networking | 8 +++++--- scripts/ovirt-config-storage | 17 ++++++++++++++++- scripts/ovirt-functions | 27 ++++++++++++++++++--------- 4 files changed, 45 insertions(+),

Used in conjunction with livecd-iso-to-iscsi. Creates a local boot partition with vmlinuz/initrd and grub configuration. Disk Partitioning > enable iscsi target > configure storage > local install and reboot --- scripts/ovirt-config-boot | 131 +++++++++++++++++++-------------- scripts/ovirt-config-storage | 164 +++++++++++++++++++++++++----------------- tools/livecd-iso-to-iscsi

--- scripts/ovirt-config-boot | 13 +++++- scripts/ovirt-config-storage | 111 ++++++++++++++++++++++++------------------ 2 files changed, 75 insertions(+), 49 deletions(-) diff --git a/scripts/ovirt-config-boot b/scripts/ovirt-config-boot index d545878..8cc127b 100755 --- a/scripts/ovirt-config-boot +++ b/scripts/ovirt-config-boot @@ -29,6 +29,12 @@ ovirt_boot_setup() { local disk2

rebased it against current next-devel --- scripts/ovirt-config-boot | 15 ++++++++------- scripts/ovirt-config-storage | 28 +++++++++++++++------------- scripts/ovirt-config-uninstall | 2 ++ scripts/ovirt-functions | 8 +++++--- 4 files changed, 30 insertions(+), 23 deletions(-) diff --git a/scripts/ovirt-config-boot b/scripts/ovirt-config-boot index ed2bb9f..01c1821

--- scripts/uninstall.py | 75 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 75 insertions(+), 0 deletions(-) create mode 100755 scripts/uninstall.py diff --git a/scripts/uninstall.py b/scripts/uninstall.py new file mode 100755 index 0000000..9e0baff --- /dev/null +++ b/scripts/uninstall.py @@ -0,0 +1,75 @@ +#!/usr/bin/python +# +# uninstall.py - destroys an installed

This completes the switch to ext3 backed root partitions. /boot is now contained on each Root/RootBackup partition. On install grub is updated to read and boot from the correct partition as well. --- scripts/ovirt-config-boot | 29 ++++++++++++------------ scripts/ovirt-config-storage | 47 +++++++++++---------------------------- scripts/ovirt-config-uninstall | 5 +---

This will facilitate the switch to readonly rootfs. The current method will not work when symlinking /etc/mtab to /proc/mounts as the udev label /BOOT is used rather than /dev/sda1 or similar. The same output is generated and has been verified to install correctly. --- scripts/ovirt-config-boot | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-) diff --git

>>israel.garcia at cimex.com.cu wrote: >>> I'm running CentOS 4.3 on Intel. I don't have any tape device on my >>> system for backup, but I have an entire disk (/dev/sdb) for backup ... >>> my question is: >>> >>> How can I backup ALL my filesystems to some place of my backup hdd >>> (dev/sdb) using dump/restore? >>>

Hi List! I want to use rsync to create differential backups of my lvm-snapshots. fullbackup-filename: /mnt/sdc1/snapshotvergleich/rootbackup1.img current snapshot: /dev/vg0/rootbackup note: compiled-in --copy-devices-patch root@xp8main3:/usr/local/src/rsync# ./rsync --version rsync version 3.1.0dev protocol version 31.PR5 Copyright (C) 1996-2009 by Andrew Tridgell, Wayne Davison, and

On Wed, Mar 01, 2017 at 04:02:53PM +0100, Viktor Mihajlovski wrote: > On 01.03.2017 04:30, Zbigniew J?drzejewski-Szmek wrote: > > On Tue, Feb 28, 2017 at 09:47:42AM +0100, Viktor Mihajlovski wrote: > >>>>>> One could argue about back-level compatibility, but virtio by-path > >>>>>> naming has changed multiple times. We have seen

On Wed, Mar 01, 2017 at 04:02:53PM +0100, Viktor Mihajlovski wrote: > On 01.03.2017 04:30, Zbigniew J?drzejewski-Szmek wrote: > > On Tue, Feb 28, 2017 at 09:47:42AM +0100, Viktor Mihajlovski wrote: > >>>>>> One could argue about back-level compatibility, but virtio by-path > >>>>>> naming has changed multiple times. We have seen