similar to: RMySQL integer range bug (PR#1400)

I have a problem when using the RMySQL package and the methods package together (R version 1.5.0) I do : library(RMySQL); m<-dbManager('MySQL') con<-dbConnect(m); quickSQL(con, ' select blah blah..'); This works fine . However when I then do: library(methods); and then repeat my sql : quickSQL(con, ' select blah blah..'); I get the following error: Error in

Hi all, We have 2 class C networks that are connected by a Linux router with the internet. We want to apply traffic control (bandwidth control). For that we wrote the tcc script below. We have 2 problems: 1. To establish a 2 megagit download we must actually set the value to 2500kbps. Is there a possible reason for that? 2. If we enable the WAN device we get very hight ping times (they change

Hi Arnaud, Hi Scott, Hi list, Here is a patch to support the Zinto D from ONLINE USV-Systeme AG. I already sent a version to Russell Kroll (2006-04-09), without no response and I cannot find support for Zinto in svn until now. I found a discussion on this list about the Xanto from ONLINE, but the Zinto seems to use different commands. The commands are quite similar to those for Opti-UPS, so I

This question is not about linux usage. But still i think user list is a good crowd for linux programmer. So here it goes. I have this libnetfilter_queue application which receives packets from kernel based on some iptables rule. Before going straight to my problem, i'm giving a sample workable code and other tools to set up a test environment so that We problem definition and possible

Hey all, i have a class. class ( <$call1> ) if ip_dst == 10.100.1.6 && tcp_dport == 22 if ip_src == 10.100.1.4 && tcp_sport == 22 ; Now when i apply this traffic TO 6 on port 22 is indeed limited to the speed i specify BUT it doesn''t seem to take the src into account at all. If i change the src to anything, even an address that

I''ve been having a bit of difficulty with a hierarchy of HTBs that I''m wanting to create. Essentially, I''ve got one interface that goes to both the DMZ and the internet. When going to the internet, some of the traffic will be going through a VPN and therefore I want to prioritize it differently, however I want to give the DMZ traffic full speed as long as it

Hi, I am new to traffic control in linux. However, i have able to grab many new knowledge in recent days. I find tcng somewhat easy to use (although lack proper doc. of its usage). I want to control traffic of several IP Addresses connected to my LANSIDE. What I want is , i want to separate certain bandwidth to all my clients. dev "etho" { htb() { class ( rate 400kbps, ceil

Hi, Looking at the following sample, shouldn''t the client1_a be restricted to 35kBps even when there is 50kBps available. Please see the following configuration and suggest. What I wanted to do is I have clients grouped on VIP and Poor. The VIP clients and poor clients may be subscribed with the same bandwidth but I would like to prioritize the VIP clients. The VIP client will get the

Hi all, Can someone please help with a tcng setup? I have played with tc and tcng in the past, and now would like to get some serious rules in place. However, I have a difficulty in setting them up. My setup is as follows: One machine working as a firewall: eth0 is the interface connected to a 512K DSL line eth1 is connected to a LAN eth2 is connected to another LAN, a bit like a DMZ eth1 and

Hi, I have several users on the lanside each allocated separate IP addresses. I need to allocate th traffic to each IP addresses certain portion of total uplink. Say, 192.168.0.2 rate 128kbps, ceil 128kbps. 192.168.0.3 rate 65kbps, ceil 128kbps 129.168.0.4 rate 64kbps, ceil 64kbps. and so on.... Also, for each user i would like to prioritize the traffic within the allocated bandwidth. say for

Although RAW sockets can be used when specifying the source address of packets (defeating one of the aspects of the jail) some people may find it usefull to use utilities like ping(8) or traceroute(8) from inside jails. Enclosed is a patch I have written which gives you the option of allowing prison-root to create raw sockets inside the prison, so

I'm having some trouble installing the add on packages. I would like to install the RMySQL_0.4-3.tar.gz add on package. I've downloaded it and unzipped the package. The INSTALL file says R CMD INSTALL [-l<alternate-dir>] RMySQL_<version>.tar.gz does this mean in the R system enter the following? > INSTALL -l /root/RMySQL_0.4-3.tar.gz (?) when I do this I get... Error:

Hi, secfolks. While reading ip_input.c I have met following lines: ;------------------------------------------------- /* 127/8 must not appear on wire - RFC1122 */ if ((ntohl(ip->ip_dst.s_addr) >> IN_CLASSA_NSHIFT) == IN_LOOPBACKNET || (ntohl(ip->ip_src.s_addr) >> IN_CLASSA_NSHIFT) == IN_LOOPBACKNET) { if ((m->m_pkthdr.rcvif->if_flags &

Hey, I currently have a box serving as a firewall (running iptables) and packet shaper (using tc / tcng''s tcc compiler) to shape a large amount of inbound and outbound traffic to my data center. Whilst I can perform shaping functions using HTB, I need to also provide an absolute (to the nearest few 100kb/s) bandwidth usage maximum. As an example I might have 200MBit/sec

Hi all, I have 2 questions regarding policing 1. What is the problem with policing as in most mesages I can find people say don''t but I have not found a why? 2. I have the egress below working (numbers in example are bogus, I know). How do I add an ingress policy? /* compile this file with tcc filename > limit.sh and run that file */ dev eth1 { egress { class (

Hi all, The following ingress statement: .... $host2 = SLB(cbs 1024kb, cir 2048kbps); class(<>) if ip_dst == 81.175.84.2 && SLB_else_drop($host2); .... is compiled by TCNG into the folling tc command: ... tc filter add dev eth0 parent ffff:0 protocol all prio 1 u32 match u32 0x51af5402 0xffffffff at 16 classid ffff:0 police index 505 rate 256000bps burst 131072 mpu 0 action

See, /proc/sys/net/ipv4/ip_conntrack_max try to change value from this file to a higher value. It may happen. If it doesn''t help go keep mailing me :). No i didn''t overcome my problem yet. But I''m close. I did what i sad in the first line of my mail and it help for some time. I think htb has some kind of defect when using ds_mark. When I were shaping download only using

Hi there, I run tinc with not ConnectTo, (and it can't tcp-connect to the relevant other tincd, because that tincd is behind a firewall --> that tincd usualy connects to my tincd). If I start that tincd alone (not connected at all) and do a ping some_other_ip, it gets a SIGBUS in route.c:207 in the function route_ipv4_unreachable at the line: hdr->ip_v = 4; This seems to be an

Pulled from Bugtraq. Dan ____________________________________________________________________________ Dan Yocum | Phone: (630) 840-8525 Computing Division OSS/FSS | Fax: (630) 840-6345 .~. L Fermi National Accelerator Lab | email: yocum@fnal.gov /V\ I P.O. Box 500 | WWW: www-oss.fnal.gov/~yocum/ // \\ N Batavia, IL

I've tried compiling samba 3.0.2rc1, 'gcc -v' gives me - Reading specs from /usr/local/lib/gcc-lib/sparc-sun-solaris2.9/3.3.2/specs Configured with: ../configure --with-as=/usr/ccs/bin/as --with-ld=/usr/ccs/bin/ld --disable-nls Thread model: posix gcc version 3.3.2 Here are a few bits from my config.log that I probably need help with, tell me if you need the whole thing - In file