similar to: Intel D425KT Motherboard / Realtek RTL8105E

Hello, We can see # lspci 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) I have used a custom kernel to start with centos 5.1 as an initial installation Our customer on this kernel has experienced slow pref on samba shares (50 seconds to open a file) So I have decided to updrade to centos 5.2 that have the right

The 8168B (02) NIC works well except that it does not go into promiscuous mode despite advertising itself in that mode after being so directed with ifconfig. Unfortunately, the little box is destined to be an IDS monitor, so that function is essential. The board is an Intel Atom 330 run as x86_64, the nic is internal. We tried three drivers: the one in the 2.6.18-128.1.10.el5 kernel yields

Hi list, I'm planning to buy a mobo (z170-K) that has Realtek 8111GR (nic). I've tried to search on google about support on C7 but can't fine anything. There is a way to check if supported? Is the Realtek 8111GR supported or I must change mobo? Thanks in advance.

I found (and fixed) a problem with my realtek onboard 8139 controller. dhcpd server sends filename "pxelinux.0" but realtek requests "pxelinux.0\377" (i.e. the octal character 377 is appended), resulting in a file not found during the tftpd phase. I fixed this by adding a mapping to tftpd: # strip ending garbage from filenames (Realtek PXE bug) r ^([[:graph:]]*)(.+)$ \1

I have an Asus P5Q-WS running FreeBSD 7 and the onboard Realtek NIC's are not being detected. No Kernel modifications as this is a fresh install. pciconf -lv : re0@pci0:3:0:0: class=0x020000 card=0x82c61043 chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' class = network

Realtek is "real" good about getting drivers for their chips into the kernels as soon as possible. They are one of the few vendors that I have never had a problem with built in support... Mike McCarthy On 06/03/2016 08:03 AM, Phil Manuel wrote: > You can get the Linux driver from >

Hello, I am bussy building a xen cluster. When selecting mainboards for this cluster i came only up with core 2 duo mainboards with onboard gigabit ethernet cards with the realtek RTL8111B chipset. I have tested a mainboard and could not find a way to compile the driver sourcecode from the realtek site because of a missing /lib/modules/2.6.16-xen/Build directory. Can anyone help me out? I am

I was trying to do some performance testing between using iSCSI on the host as a diskfile to a guest vs the VM guest using the iSCSI device directly. However, in the process of trying to establish a baseline performance figure, I started increasing the MTU settings on the PCI-express NICs with RTL8168B chips. First bottleneck was discovering the max MTU allowed on these is 7K instead of 9K but

I''m trying to build out a test cloud using XCP 1.0.0 beta with 3 machines of 18 cores total (Phenom II 1090s). I''ve built three machines, installed XCP 1.0.0 beta on them and they all three have the same problem - the Realtek network cards don''t work. The following is the output from lspci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI

Hi, I try to make my SD-reader work on a HP ZBook. lspci 5d:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5249 (rev 01) uname -a Linux Antisana.psc-elsene.be 2.6.32-431.17.1.el6.x86_64 #1 SMP Wed May 7 23:32:49 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux Googling gave me http://linuxterminal.org/issue-with-rts5229-pci-express-card-reader/; last reply by Fran?ois suggests to

Hi all, I swapped a Realtek 8139 100M Net Card for a Realtek 8169 Gig Net card in a Centos 5.6 system. After reconfiguring the network settings I find that on boot up the 8169 interface does not start. The startup script says something like "The 8169 is not available..." ifconfig -a shows a device with the right mac address called __tmpsomethingorother I can get it going if I

Hi, After updating from 7.0-RELEASE to STABLE (around 15/08) my NIC refuses to handle large file transfers. pciconf -lv re0@pci0:4:0:0: class=0x020000 card=0x001a6409 chip=0x816910ec rev=0x10 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8110SB Single-Chip Gigabit LOM Ethernet Controller' class = network subclass = ethernet Log

Does anybody know if NIC Realtek RTL8151GH-CG is supported on FreeBSD 9.2 or 10.0? It is included in HP ProDesk 490 MT which I may buy, but I cannot find what hardware parts are supported by FreeBSD and what not. I am running FreeBSD for about 13 years on servers. I didn't run it on desktop grade HW for more than 8 years. So any tips for some solid home PC with i7-4770 (or i7-3770?) is

Hi, Last friday I changed the NIC in two of our Samba servers from a 3com 905b (100mb) to a 3com 2000T (1000mb) to take advantage of our new switch which supports gigabit. One of the workstations (XP SP1, with all subsequent patches and hotfixes and with an onboard Realtek 8139) then started to have problems with the two Samba servers with the new NIC's. It could see the network

Seems like overnight every motherboard that worked with linux has DROPPED off the face of the earth. Every motherboard I looked at is using the realtek 8111 chipset and a northbridge that is not supported. Example: GIGABYTE GA-970A-DS3, does not work with linux I tried disabling the onboard NIC and using a PCI-E intel card I always use and that would not work either. The north or south bridge

On Mon, Jan 10, 2011 at 12:08 PM, Rudi Ahlers <Rudi at softdux.com> wrote: > On Mon, Jan 10, 2011 at 11:49 AM, compdoc <compdoc at hotrodpc.com> wrote: >> I love realtek - the resources they use tend not to conflict with other >> cards or hardware, they don't use much cpu time, the drivers are mature, and >> they don't cost much. What could be better? There

I just installed Centos 5.5 x86_64 on a new Toshiba Satellite L1500D. Everything seems to work (so far) other than the wireless networking; lscpi tells me: 0e:00.0 Network controller: Realtek Semiconductor Co., Ltd. Unknown device 8172 (rev 10) I discovered that I need the realtek driver, so I found and downloaded these: rtl8192se_linux_2.6.0010.1012.2009_64bit.tar.gz

Jerry Geis <geisj at pagestation.com <http://lists.centos.org/mailman/listinfo/centos>> wrote: >/ Hi, />/ I have a compaq V2000 laptop. Specs for network say its a />/ realtek 8139/8139C+ NIC. / Is it really a RTL8139? Or it is possible that it's a RTL8100? The reason I ask is because while the RTL8100 is supposed to be MAC compatible with the RTL8139, I'm finding

Anyone know how to get the realtek 8211CL network driver working on an ASUS M3N78 motherboard? I was able to get the SATA disks to work with using the pci=nomsi boot option. Jerry

One last shot in the dark: what if you reboot the router in front of the node in question? Sometimes it was surprised, when managing different mac addresses on the same adapter. I might be missing some parts, but did the mobo work before? Best regards Zoran