similar to: extlinux.conf not found

Hello list, I'm trying to reuse a fairly old PC based embedded system. It has no video output at all, no VGA, nothing older, and no keyboard / mouse connectors. The console is on a standard RS232 interface, including BIOS output and the minimal BIOS loader. The BIOS emulates / redirects text output to and keyboard input from the console RS232 interface, but unfortunately, this emulation

Due to delayed allocation feature on XFS filesystems, a write is not guaranteed to flushed out to the underlying file system after crash or something else - so we need to make sure that ldlinux.sys is installed correctly in the mounted filesystem. Signed-off-by: Paulo Alcantara <pcacjr at zytor.com> --- extlinux/main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/extlinux/main.c

Hi everyone, I'm working with libguestfs 1.30.3 on Centos 7 host. I encountered a problem when I wanted to install extlinux with guestfish as a bootloader for my guests and I always get this error: SYSLINUX 4.05 EDD 0x54f93f16 Copyright (C) 1994-2010 H. Peter Anvin et al ERROR: No configuration file found No default or UI configuration directive found! boot: _ *This is how I create the

Merge btrfs_read_adv and xfs_read_adv into a single generic function ext_read_adv and split ext_write_adv_offset out of ext_write_adv. Use those new functions in rewrite_boot_image and btrfs_install_file where it is actually hardcoded. Signed-off-by: Nicolas Cornu <nicolac76 at yahoo.fr> --- extlinux/main.c | 113 +++++++++++++++++++++++++++----------------------------- 1 file changed, 55

On Sun, Nov 15, 2015 at 12:30:35PM +0100, Ady SF via Syslinux wrote: > [PATCH] extlinux/main.c: typo fixes > > Some typo fixes in extlinux/main.c. > None of them effects code execution. > --- > extlinux/main.c | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > FWIW working on a new version that is `git am` ready, it will have a "sign-off".

Hello there I built development version of syslinux from git 6.04-pre3-3-(sometag) and I am trying to boot a slackware-current system with it. I do not use a separated partition for `/boot`. It's just `/dev/sda1` here for `/` and `/boot` is just a folder. I simply use `mbr.bin` against a DOS partition table and the first partition having the bootable flag. With this layout, the only

Hello, We are experiencing a strange behaviour on an embedded system (i386 PC board). The structure of our disk is the following one : - A 2GB fat16 partition with DOS and syslinux - A 100GB Ext4 partition with Extlinux an several linux images to boot on ram - A swap partition The system boot on syslinux to choose among Dos and Linux boot using chain. When Linux is chosen, syslinux chains to

On Fri, Nov 13, 2015 at 06:14:36AM +0100, Geert Stappers via Syslinux wrote: > On Fri, Nov 13, 2015 at 05:05:26AM +0200, Ady via Syslinux wrote: > > diff U3 syslinux-6.03/extlinux/main.c syslinux-6.03_typo/extlinux/main.c > > --- syslinux-6.03/extlinux/main.c Mon Oct 06 16:27:44 2014 > > +++ syslinux-6.03_typo/extlinux/main.c Fri Nov 13 02:29:56 2015 > > patch seen >

On Tue, Oct 20, 2015 at 1:08 PM, Ady via Syslinux <syslinux at zytor.com> wrote: > >> Hello, >> >> We are experiencing a strange behaviour on an embedded system (i386 PC board). >> >> The structure of our disk is the following one : >> - A 2GB fat16 partition with DOS and syslinux >> - A 100GB Ext4 partition with Extlinux an several linux images

I am new to syslinux/extlinux. Can I boot from a linux btrfs subvolume? I am getting "Failed to load ldlinux.c32" when I attempt to boot from a btrfs subvolume. Setup: 1) I have a USB disk with one partition. The partition is marked "active". 2) I make a btrfs filesystem with "mkfs.btrfs /dev/sdd1". I mount the partiton and execute "btrfs su create

Hi, I have the same problem as Helmut with INCLUDE keyword and extlinux 5.10 an later. The following configuration has been tested and worked with extlinux 4.05, 4.06, 5.01 Contents of "boot_label" file DEFAULT 1 --------------------------------------- Contents of "extlinux.conf" file # Enable menu.c32 UI menu.c32 # Disable the boot: prompt PROMPT 0 # 5 sec TIMEOUT 50 #

Hello syslinux, Merry Christmas! These patches will make extlinux work with umounted ext2/3/4 filesystem, for example: $ extlinux -i /dev/sdXN or $ extlinux -i file_block Also it can work with something like: $ extlinux /dev/sdXN --reset-adv or $ extlinux file_block --reset-adv We don't use a new option (I planed to use "-d" but it is already in use), it will check whether the

Hi, I discovered a very strange situation. I have 22 systems running Fedora 21 (F21) with bundled syslinux-extlinux 6.03. On one of those systems, I am having trouble booting. This machine was upgraded from Fedora 19 (F19), so can boot either the new or the old O/S -- F19 is on one disk partitition, F21 is on another, and there's a shared /boot partition. On this one machine, when I try

Hi guys, I'm have a pure 64-bit system (Intel based). Due to that I can't use 32-bit ELF extlinux binary provided in the syslinux-6.03 package. Unfortunately building extlinux installer failed... See error below after these command: make bios clean make bios (failed) ... ar cq liblpxelinux.a rawcon.o pxeboot.o pxelinux-c.o fs/pxe/dhcp_option.o fs/pxe/pxe.o fs/pxe/tftp.o

Hi, I'm experiencing a strange problem, my extlinux is no longer bootable, and I'm wondering how to troubleshoot the problem for a fix. It's not just an one-off thing, but is happening to me all the time -- I use extlinux to boot up all my linux, and it has always been working for me, for at least 10+ years. However recently I started to duplicate my linux system from partition to

Hi, I hope somebody can help me with this problem. I don't know whether it's a problem with my configuration or a bug or feature in extlinux. I am using an IPMI 2.0 serial-over-lan console to connect to a system with an Intel S3200SHL motherboard. The first line of my extlinux.conf file looks like this: serial 0 57600 0x003 I am using ipmitool to access the console, like so:

On Sun, Feb 8, 2015 at 7:49 PM, Alexey Orishko via Syslinux <syslinux at zytor.com> wrote: > Hi guys, > > I'm have a pure 64-bit system (Intel based). Due to that I can't use 32-bit ELF > extlinux binary provided in the syslinux-6.03 package. > > Unfortunately building extlinux installer failed... > > See error below after these command: > make bios clean

On Sun, 8 Feb 2015 20:21:58 -0500 Gene Cumm via Syslinux <syslinux at zytor.com> wrote: > On Sun, Feb 8, 2015 at 7:49 PM, Alexey Orishko via Syslinux > <syslinux at zytor.com> wrote: > > Hi guys, > > > > I'm have a pure 64-bit system (Intel based). Due to that I can't > > use 32-bit ELF extlinux binary provided in the syslinux-6.03 > >

Hi, On Fri, Jul 03, 2015 at 07:13:18AM +0300, Ady via Syslinux wrote: > It is not so clear to me which version of Syslinux (or which version of its > Fedora's packages) you are actually using to boot these systems (not just the one > currently failing). Sorry I wasn't clear. Fedora 19 was installed on a / and /boot partition. I then installed Fedora 21 on a separate /

On May 13, 2014 4:04 PM, "Ady" <ady-sf at hotmail.com> wrote: > > On Tue, May 13, 2014 at 7:51 PM, Ady <ady-sf at hotmail.com> wrote: > > > I wonder why the already built-in binaries are not enough / adequate. > > I don't believe it can be used as is: > > bash# file syslinux > > syslinux: ELF 32-bit LSB executable, Intel 80386, version