Displaying 20 results from an estimated 300 matches similar to: "AHCI Timeout errors on Intel Patsburg"
2012 Oct 02
1
ahcich reset -> cannot mount zfs root in 9.1-PRE
Hi all,
Trying to upgrade a system from 9.0-RELEASE to 9.1-PRE from yesterday on
my machine (GEOM+ZFS mirror setup on ada[01]p3), the new kernel becomes
unable to mount root... The only way to recover is to boot from 9.0 kernel.
The disks were already named ada[01] in 9.0, so I suspect nothing there...
I tried
- disabling AHCI in bios (no change seen)
- change cables, check PSU, test disks
2013 Mar 05
2
make_dev_physpath_alias
Hello all.
I have a supermicro 16 bay box with a LSI 9211-8i card.
We use it for temp data storage, and we wanted to try the l4z compression.
After updating the source tree to r247839: and doing a make buildworld
cycle all works fine.
But at boot time we get some warnings.
make_dev_physpath_alias: WARNING - Unable to alias
gptid/281951f4-a996-11e1-83eb-00259061b51a to
enc at
2012 Aug 02
1
Problem detecting Sil3124 SATA controllers off of Sandy Bridge northbridge-connected PCIe slots
Hi,
We're having some trouble with detection of a couple of Sil3124 SATA
controller cards on newer motherboard and processor combos.
Specifically, we're running a Supermicro X9SCM-F motherboard (latest
BIOS) and Intel E3-1220v2 CPU.
What we're seeing:
- Syba Sil3124 PCIe cards are only being detected when installed in PCIe
Slot 4
-- The motherboard documentation shows that this
2013 Nov 03
1
FreeBSD 10 Beta 2: make installkernel failure with installer provided ZFS configuration.
Hi,
I was trying to rebuild world on a FreeBSD 10 test system, that I had just
installed. ZFS root was setup. I let the installation program do all the
ZFS setup and configuration. I put root on a 5 disk encrypted raidz array.
Besides the installer configuring 5 times the amount of swap space I asked
for (asked for 8gb, installer put 8gb on each drive, for 40gb in total.)
everything was working
2012 Oct 08
2
time keeps on slipping... slipping...
I recently put together a new machine w/ a SuperMicro H8SCM and an
AMD Opteron 4228 HE... I've having an issue where the clock on the
machine skips around... The wierd part is that it's very sudden when
it happens... ntp sometimes brings it back, but it can't when the clock
gets too far ahread (1000 seconds), ntp dies...
In order to catch it happening, I ran a sleep 60 loop
2015 Jan 05
2
winbind backends ad and rfc2307 both with errors...
Hello,
I just set up a samba server (version 2:4.1.13+dfsg-4) on Debian 7.7,
being a member server of a Win2k8-Domain (before that, that server was
an old SuSE (10.4)-Samba with own user-management (standalone-server).
I would like to use winbind with the idmap backend "ad" or "rfc2307"
instead.
When using rfc2307 (like in my conf specified), I can do successfully:
wbinfo
2011 Jun 09
0
Help on survival analysis
Hi,
I need a help in a survival analysis using survreg function with weibull
distribution from survival package.
Look the data sample:
########## Start of script
dados <- structure(list(TFD = c(20L, 34L, 1L, 2L, 3L, 3L, 50L, 26L, 1L,
50L, 21L, 3L, 13L, 11L, 22L, 50L, 50L, 1L, 50L, 9L, 50L, 1L,
13L, 50L, 50L, 1L, 6L, 50L, 50L, 50L, 36L, 3L, 46L, 10L, 50L,
1L, 18L, 3L, 36L, 37L, 50L, 7L, 1L,
2013 Nov 23
2
SSD becomes detached 9.2
Hello,
I am setting up a new (remote) server. I initially installed 9.2 RC4
amd64 because that's what the data center put in the drive for me.
Shortly thereafter I downloaded 9.2-STABLE sources and compiled world
and a generic kernel. While doing so the system became unreachable by
SSH The SSH sessions appeared to connect but there was never any data
returned. I could telnet to port 22
2010 Oct 19
0
NFS/SATA lockups (svc_cots_kdup no slots free & sata port time out)
I have a Solaris 10 U8 box (142901-14) running as an NFS server with
a 23 disk zpool behind it (three RAIDZ2 vdevs).
We have a single Intel X-25E SSD operating as an slog ZIL device
attached to a SATA port on this machine''s motherboard.
The rest of the drives are in a hot-swap enclosure.
Infrequently (maybe once every 4-6 weeks), the zpool on the box stops
responding and although we
2012 Jun 24
1
Problems with Powerware 5115 on Patsburge USB
I am seeing some problems when using the Powerware 5115 UPS when connected to the Patsburg USB controller and would like to know if anyone has a solution.
The symptom is that PING messages sent to the bcmxcp_usb driver take as long as 25 seconds to complete.
The configuration is a Romley patform (a.k.a., Sandy Bridge + Patsburg) running Debian 6 with 2.6.39 kernel with NUT 2.6.4 in which the
2013 Sep 22
0
UEFI boot - no console will be available to OS
I''m trying to run Xen on Arch Linux with UEFI boot. I followed the steps for Xen in the Arch Linux Wiki https://wiki.archlinux.org/index.php/Xen
I get the following when attempting to boot:
Loading Xen 4.2.2 ...
WARNING: no console will be available to the OS
Loading Linux linux ...
Loading initial ramdisk ...
Unfortunately there is no console so I cannot determine what has gone wrong,
2012 Nov 13
1
thread taskq / unp_gc() using 100% cpu and stalling unix socket IPC
Hi there
We have a pair of servers running FreeBSD 9.1-RC3 that act as transparent layer 7 loadbalancer (relayd) and pop/imap proxy (dovecot). Only one of them is active at a given time, it's a failover setup. From time to time the active one gets in a state in which the 'thread taskq' thread uses up 100% of one cpu on its own, like here:
----
PID USERNAME PRI NICE SIZE
2011 Aug 22
0
How to find out if the installed NIC supports SR-IOV?
Hi,
I am working with a westemere based server. I need to find out if the NIC
installed there supports SR-IOV - what would be the best way to determine
that?
Regards,
Kashyap
hwconfig
-------------
Summary: HP DL160 G6, 2 x Xeon E5620 2.40GHz, 15.7GB / 16GB 1333MHz,
1 x 500GB SATA
System: HP ProLiant DL160 G6, C-2N/16/500, ySPEC 25.0
Processors: 2 x Xeon E5620 2.40GHz (HT
2013 Jun 19
1
Fedora 18 dom0, no video?
Hi all. I''ve got a situation with Fedora 18 on a dual Xeon E5506 box,
16GB RAM, Tyan S7002 motherboard with the latest BIOS. Because of all
the issues, I''m starting to think maybe there''s something wrong with
the box itself, maybe something strange going on with the BIOS or mobo
resources. Although this box was in service without incident for
about 2 years prior. I
2007 Apr 30
4
B62 AHCI and ZFS
Hardware Supermicro X7DAE (AHCI BIOS) dual Intel Woodcrest processors, 6 x Western Digital Raptor SATA drives.
I have installed b62 running 64 bit succesfully on a PATA drive. The BIOS is configured to access the SATA drives in native mode using hte AHCI Bios.
I have 6 SATA II drives accessed via the Solaris AHCI driver. I have created a ZFS file system across all 6 drives. This works fine until
2008 May 07
0
Kernel panic - em0 culprit?
Hello,
My server is experiencing occasional kernel panics when under moderate
load. I'm attaching a crash dump and the dmesg output. I'm not sure how
to read the kernel backtrace but it looks like the Intel NIC (em0)
caused the problem. Occasionally, I used to get a "em0: watchdog timeout
-- resetting" error message, but I never had a kernel panic. The problem
started last
2008 Oct 14
0
Orinoco 802.11b PC Card doesn't work on STABLE
Hi,
I have Orinoco 802.11b PC Card from Proxim. I plugged it to pcmcia
slot, but It doesn't work - no blinking LEDs, no wi0 in ifconfig.
I have 7.1-PRERELEASE, laptop Prestigio Nobile 157. On NetBSD seems
working, but NetBSD is not friendly with me.
if_wi driver included in kernel.
----- dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
2008 Apr 16
2
AHCI and correct drive geometry?
Hey folks,
So what's the word on AHCI and bios drive geometry? I'm having a real
pain of a time trying to get some 750gb sata drives running on my
FreeBSD7 box in AHCI mode. It doesn't seem to matter what disk geometry
I suggest to sysinstall, something complains of an invalid disk upon
booting it.
Actually, in AHCI mode the bios screen doesn't report any information on
2008 Nov 30
1
panic: spin lock held too long on 7.1-PRERELEASE (sio)
Hi,
I currently encounter
spin lock 0xc0c83ba8 (sio) held by 0xc6337460 (tid 100005) too long
panic: spin lock held too long
cpuid=3
on hp server with two dual-core intel xeon (3.8GHz) and 3GB RAM.
System is 7.1-PRELEASE last fetched 29.11.2008, 17:58 UTC.
This happens with VSCom Card that was previously in use in a
5.3-STABLE system (also hp server, but older hardware) without
problems. The
2013 May 22
0
em2: watchdog timeout -- resetting
Hello, I have a server pfsense in bridge mode to function as transparent
FW, the problem is that once I connect the pfsense between my router core
and my core switch catalyst a few seconds begin to appear several messages
like these:
em2: watchdog timeout - resetting
em2: watchdog timeout - resetting
em2: watchdog timeout - resetting
em2: watchdog timeout - resetting
And the connection falls