similar to: bcmxcp_usb can not communicate with Eaton Powerware 5110

Good evening, I tried getting this to work a couple years back but didn't have enough time to do all the debugging that was needed (apologies to the devs who tried to help at that time). It's working much better now, but I'm still not able to get an answer from upsc. Can anyone help me work out why I'm getting the error when querying with upsc: Error: Data stale My

Good evening, I tried getting this to work a couple years back but didn't have enough time to do all the debugging that was needed (apologies to the devs who tried to help at that time). It's working much better now, but I'm still not able to get an answer from upsc. Can anyone help me work out why I'm getting the error when querying with upsc: Error: Data stale My

Hi All, I have a powerware UPS 5110 connected to an openindiana server with the bcmxcp_usb driver and running nut 2.65 compiled and installed as root to avoid permission issues. On running the following debug code to test the UPS's communication it fails at the same time with the following error. ./bcmxcp_usb -u root -DDD -a 5110 ....... 2.523879 get_answer: (128 bytes)

Hello, I 'm trying to set up an Eaton PW5110 using nut-2.4.1 in OpenBSD, my ups.conf follows : [myups] driver = bcmxcp_usb port = auto desc = "Eaton PW 5110 (1500VA)" My first attempt to run upsdrvctl ended up complaining about unimplemented usb_clear_halt() in libusb. I patched libusb-0.1.12 with the following patch :

List: I have an Eaton (Powerware) Model 5115 and am using the bcmxcp_usb driver on a OpenBSD 4.9 system. The upsdrvctl start appears to work and I get a message in my daemon log stating that it successfully started. I can successfully start the upsd daemon. I get a successful start messaage from the upsmon program, but it soon complains of 'stale' data. It looks like the driver

Hi everyone, First of all a big thank you for the NUT package, I've been using it for years and couldn't get by without it! I have two Powerware UPS's here, a 9120/1500va and a 5110/700va. The 9120 has used a hacked bcmxcp driver (serial) from the 2.0.2 nut version for about a year now (which I'll explain more about in a seperate email to the dev list), and the 5110 which I just

Hi, I have got a Powerware 5110 UPS which has a usb interface on it. I have downloaded and compiled nut-2.0.3-pre2 with the usb drivers enabled on RedHat Enterprise V3 however I have been unable to get nut to connect to the UPS. I have tried executing the driver directly (using bcmxcp_usb -DD -u root /proc/bus/usb/002/002) as well as using upsdrvctl with the port set to auto (am I correct in

Hello subscribers, I have a very strange question regarding SSL setup on gluster storage. I have create a common CA and sign certificate for my gluster nodes, placed host certificate, key and common CA certificate into /etc/ssl/, create a file called secure-access into /var/lib/glusterd/ Then, I start glusterd on all nodes, system work fine, I see with peer status all of my nodes. No problem.

Hi. I'm looking for a way to configure an Eaton Powerware 5125 under Debian Squeeze (amd64) with USB port. Can someone help me? Find attached bellow my settings: # cat /etc/nut/ups.conf ... [ups01] driver = bcmxcp_usb port = /dev/bus/usb/002/003 desc = "Powerware 5125" # ls -la /dev/bus/usb/002/003 crw-rw-r-- 1 root nut 189, 130 Nov 21 11:45 /dev/bus/usb/002/003 #

On Feb 15, 2014, at 6:46 PM, Greg Vickers wrote: > Thanks! I've attached the file to this email (bcmxcp_usb.output2014160926.gz), it ran for 12 seconds, and looks like it's looping by that time. I'm not sure what to look for, does grepping for 'Yes' show the variables that the driver can pull off this UPS? The boolean variables seem to be indicated by "Yes". I

I noted some correspondence from several years back about supporting this device with bcmxcp, and the problems therein. Since I have one of these UPS units, still going strong, and the Eaton LanSafe stuff has finally caused me enough grief to abandon it, I figured I'd take a look at this. The issue is not that bad - the bcmxcp driver query of the topology block (2 bytes!) is returning

Observed on Linux 3.2.9 after the controller/disk flaked in-out. (The world still needs a SCSI error decoding tool to tell normal people what cmd and res are about.) [ 157.732885] device label srv devid 4 transid 11292 /dev/sdf [ 157.733201] btrfs: disk space caching is enabled [ 172.936515] device label srv devid 4 transid 11292 /dev/sdf [44106.091461] ata4.01: exception Emask 0x0 SAct 0x0

The meter map is basically a bitmap that indicates what variables are output (and in what format) by the UPS. You will likely see a variable, 'not mapped' or nothing. The variables and 'not mapped' items are output by the UPS in the measurement block, and the map tells nut how to read it. 'Unmapped' means that there is a variable there that nut is ignoring, and the xcp

Hi, I played around with samba 2.2.5 and cups and tried to get it working. Well everything is fine, but the driver upload to the client WILL NOT WORK. I used the current stable downloads, latest patch for printing, prebuilds from Lars Mueller .... I put together everything. If one has a working samba//cups please tar it and place it on our ftp-server. I don't know what's wrong here

Hi! Does this sound familiar, before I try to look deeper into it? [2005/02/13 20:10:16, 0] /usr/ports/net/samba/w-samba-3.0.11/samba-3.0.11/source/libsmb/smbencrypt.c:decode_pw_buffer(539) decode_pw_buffer: incorrect password length (1251354155).

On 16/02/14 00:38, Charles Lepple wrote: > On Feb 15, 2014, at 2:57 AM, Tim Dawson wrote: >> The driver will poll the UPS for what variables it supports when it starts, and then go into a polling loop. Look for a section defining the meter map, and you should see the result, as well as the raw data. > Tim: spot on. > > Greg, > > If you want, you can capture the -DDDD output

Well, I've been dicking around with DUNDi for about 4 hours now. I have two systems that I am trying to get to peer with each other. Queries are working one way, but not the other. The server, pbx1, that is refusing to deliver any queries and logs what's below to the console. Why??? I've checked all the config files more times than I can remember. The 'RFC' for DUNDi at

Hi all! I operate an AD domain on samba4, provisioned some years ago. At provision some dns zones created, linked to my domain. I name domain as subdomain of my internet domain: AD dc.samges.ru, internet zone samges.ru Forward zones: dc.samges.ru _msdcs.dc.samges.ru All worked normal, but then my coworker create forward zone samges.ru (using windows RSAT tools) It serves some names, I can

Hi all, I've got a Powerware 5110 UPS that I'm trying to set up with nut in Ubuntu. I've installed nut and configured the first two files: $ cat /etc/nut/nut.conf MODE=standalone $ cat /etc/nut/ups.conf [pw5110] driver = bcmxcp_usb port = auto # port = /dev/bus/usb/002/002 When I try to test this configuration with the following command: $ sudo upsdrvctl start pw5110 Network UPS

I am having trouble getting Google Chrome to accept a WebRTC call coming from Asterisk, even though Firefox can (now) accept the same call without issue. My setup is as follows: Server: CentOS 7 x86_64 (Elastix 4 RC) with IP: 10.1.0.4 192.168.5.146 asterisk-11.21.0 patched to work around https://issues.asterisk.org/jira/browse/ASTERISK-25659 openssl-1.0.1e-51.el7_2.2.x86_64 [root at elx4 ~]#