similar to: tinc router mode on Windows 7

Hello, I've been trying to get bridging working on os x for about a week and haven't been able to do it. I've exhausted the examples and google and just can't get it to work. Any help would be appreciated, as I'm about to give up :( The goal is to join our two 192.168.1.x networks and share a large 192.168.1.x network between the two of us. Our setup is as follows:

Hello, I have faced some problems : 1. With iptables running i can't ping my tincvpn server but as i turn it off i can. i have added all rules mentioned in examples but no success. 2. I want to get internet access on the client which is a win 7 computer using tincVPN but i gained no success either (i can't use bridges because server is a VPS using OpenVZ) so any advice for solving this

Hi - Thanks to Sven-Haegar and Donald, but still having issues setting up with Windows. Machine1 can't ping the VPN address of machine2. Regular IPv4 address for both machines in 192.168.1.xxx range. Router: Forwarding port 655 to 101.102.103.1, UDP and TCP Forwarding port 656 to 101.102.103.2, UDP and TCP Tinc.conf on machine user1 just three lines: Name = vpnuser1 ConnectTo =

Hi, Thanks to John Wice for helping me with an earlier question. My two PCs behind the same router are still having problems connecting. Would appreciate thoughts on what I?m doing wrong? Router: Port 655 forwarded to 192.168.1.45, both TCP and UDP Port 656 forwarded to 192.168.1.51, both TCP and UDP Machine #1. ========== Local IP address on LAN = 192.168.1.45 Windows Firewall

Guus: I have been test running the VPN between 2 geographically different clusters on a TINC VPN for a couple of days. How confident are you in the New Protocol in 1.1Pre10? Or should I just play it safe and run the old protocol for production? How long do you think it will take for you to have confidence in the new protocol? When do you think you will gain that confidence? You should be

Hi! I'm currently using Tinc to create a VPN between a Linux server, a Windows server, and my local laptop and desktop computers (both running Windows). I picked an IP in the 10.123.1.x range for each server, and added something like "Subnet = 10.123.1.1/32" to each host config file. It's working very well! What I'd like to do now is expose an extra subnet to the VPN. The

Hey List, Hey Guus, I would now like to secure my tinc installation. From the man page I see the following. -L I put EXTRA="-L" in /etc/default/tinc and tinc still works. -R Do I have to put libraries and device files under /etc/tinc/NETNAME to build a functional chroot jail ? Currently lsof reports these open resources for tincd: lsof -p $( pgrep tincd ) -n COMMAND PID USER FD

hi. I suggest you to look at "Automatic Dependencies" in https://www.freedesktop.org/software/systemd/man/systemd.service.html. I think using "After=" and "Recuires=" is more suitable. On Mon, Feb 29, 2016 at 4:48 PM, md at rpzdesign.com <md at rpzdesign.com> wrote: > Hello Tinc'ers: > > I want to use TIncVPN in a systemd Ubuntu environment.

Thanks. I played with it some more, and finally got it working. I am willing to write up a detailed how-to, including screen shots, if you guys are interested. Just tell me in what format you want the write-up. Cheers, From: Daniel J. Grinkevich Sent: Wednesday, July 22, 2015 7:26 AM To: tinc at tinc-vpn.org Subject: RE: Please help debug Windows setup Your port forward needs to

Window allows one to specify a DNS domain name and DNS server for a particular interface. So all DNS queries of your tinc interface are sent to a particular dns server. For instance windows tinc clients can use a particular dns server on a private LAN available only to clients inside that NAT or tinc clients. NetworkManager allows you to specify the same, but the tinc interface does not show up

Make sure your router supports nat reflection and has it enabled. On Mon, Jul 13, 2015 at 5:44 PM, Adam Macielinski <adam at macielinski.net> wrote: > Hi, > > > > Thanks to John Wice for helping me with an earlier question. My two PCs > behind the same router are still having problems connecting. Would > appreciate thoughts on what I?m doing wrong? > > > >

Scenario: Our Asterisk 13 PBX (on network 192.168.254.0/24, bound to 192.168.254.1:5060) is behind a NAT, acting as a client to our ITSPs SIP server. But also, this Asterisk is server for various VoIP telephones. Acoording to Asterisk's wiki, the transport section of pjsip.conf is configured as follows: ; Transport via UDP [transport-nat-udp] type= transport

Gents, first of all thanks for tinc, and thanks in advance for your advice. At the risk of revealing my stupidity and opening myself to ridicule.... I am trying to connect a new remote lan into an existing tinc vpn with the central tinc vpn server located at 10.57.132.1 on the 10.57.132.0/24 subnet. I set up this central tinc vpn server myself along with several other remote lans linked to

Hello everyone, I have followed this guide to enable my Windows 10 guest to reach my Arch Linux host: https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Virtualization_Host_Configuration_and_Guest_Installation_Guide/App_Macvtap.html My VM now has 2 NICs: - macvtap (VEPA) - virtual network 'isolated' I have statically assigned the IP 192.168.254.2 to my

Hello everyone, I have followed this guide to enable my Windows 10 guest to reach my Arch Linux host: https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Virtualization_Host_Configuration_and_Guest_Installation_Guide/App_Macvtap.html My VM now has 2 NICs: - macvtap (VEPA) - virtual network 'isolated' I have statically assigned the IP 192.168.254.2 to my

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Tue, 10 Mar 2015 02:10:51 +0100 Guus Sliepen <guus at tinc-vpn.org> wrote: > If that was not the problem, then another issue might be the version > of OpenSSL on your Beaglebone not supporting the Cipher or Digest > algorithms that you are using. > This seems the most probable from the various tests and key changes and so forth

I worked this out - I just had to manually add a route on the Windows machines: route add 192.168.122.0 mask 255.255.255.0 10.123.1.4 (where 10.123.1.4 is the local IP on the Tinc interface) I was hoping that Tinc would automatically configure the routing tables, but configuring it manually is fine. On Tue, Dec 4, 2018 at 11:10 PM Daniel Lo Nigro <lists at d.sb> wrote: > Hi! > >

Hello all, Yesterday I noticed that my system was "leaking" traffic towards the 10/8 network, I have shorewall installed on multiple machines ranging from single interface devices to ones with 10+ interfaces. I tested all the boxes and they are showing the same behavior. All systems are CentOS 3.4, 2.4.21-27.0.2.ELsmp. Shorewall version: 2.2.1 For the host mentioned is a single

Hello, After each reboot, my Samba AD member server lost domain join after reboot, I have to re-enter the server in the domain with the "net ads join -U administrator". I use version 4.4.3 of samba. The domain controller is a Samba AD server. After reboot, when I exectute "net ads testjoin" I have: kerberos_kinit_password SMB2$@AD.SAMDOM.LOCAL failed: failed

yes, I have these in C host file: Subnet=10.10.0.0/24 Subnet=0.0.0.0/1 Subnet=128.0.0.0/1 ## not metioned, because I think is maybe works in same as 0.0.0.0/1 B host file doesn't have 0.0.0.0/1 and 128.0.0.0/1 I only added one route to 5.6.7.8 via B, not via C On Mon, Feb 29, 2016 at 4:40 PM, Maxim Vorontsov <6012030 at gmail.com> wrote: > hi. > > Are you add only