similar to: iran

ofcourse there is no freepbx, and there is no difference between the version of asterisk , ATM we are using asterisk 1.6.2.19 , i've also tried it on asterisk 1.10 , which resulted in the same way , does anyone have any ideas , why is it happening like this . thank you. On 9 January 2012 14:30, <tinc-request at tinc-vpn.org> wrote: > Send tinc mailing list submissions to >

actually at the moment the setup is like this , it has the same ip address , both lan and tinc , but iax doesn't work at all , moreover , i want to be able to make an IAX trunk to the rest of the machines from different networks together . what happens is that , asterisk says that the request is sent , but nothing will be received . if you want i can try to make a tcpdump tomorrow , and send

Hi everyone , i have a large network , connected together by tinc , and the whole network is connected so that i can access all the devices through out the networks simply and easily , but when i try to interconnect my asterisk servers usin iax , it doesn't work , if i try to register to my server using the tinc's interface it's ok, the registry is done ok , and the connection works

Hi , today i was trying to connect my windows 7 client to my tinc server and i ran into a strange problem :) my tinc server is running tinc 1.0.11 on ubuntu 10.04 in switch mode , and the windows client is running tinc 1.0.13, there is a very strange problem , i tried to connect the windows system , i configured it , and it didn't work , so i ran it in debug mode -D -d5 , and it told me: Got

Hi everyone , i have a few questions/problems with tinc , which i need to address ASAP , so i'll make it brief . i have 33 sites , connected with each other using wan , in each site , there are two linux firewalls + 3-4 more servers , i preferred to have a full mesh within my network , but unfortunately it was not possible , when i wanted every site to be connected to every other , as the

i need forwarding off , cause i need a central node , which is connected directly to all the network , directly , so it can usually upload content directly , without slowing down other nodes in the network , i also don't want it to act as a forwarder , since ,it only has 2mbps of bandwidth , and i don't want it for that purpose , is there any other way to fix this problem ? On 16 March

Hello everyone, I'm actually using tinc mostly to route all my traffic to another server , and my internet provider does all sorts of shaping and packet inspection to the outgoing packets, including but not limited to shaping encrypted TCP sessions , and re-routing UDP connections every few minutes and even blocking IP addresses in case too many users are connected with a traffic other than

Hi , at the moment i'm managing a distributed network country wide , which i want to use tinc on all the machines so we can have direct access to all the servers (including those behind firewall) . the problem arises with the fact that , my firewalls are connect to two separate networks , one is actually a country wide network , and the other is internet access , is there a way , that tinc

Hi , I've added one node to my tinc mesh , with forwarding off , and the network got splitted into several pieces !!, the thing is that , the node with forwarding off is connected to all hosts , directly with connect to , and seems like that for some nodes the shortest path , that the tinc network can find is through the node with forwarding off , here are the results of my first ping to all

I'm looking to use the Digium E1 card in Iran. Does anyone out there have any experience with something like this? What are the odds it will work first time or ever? Bill

hi, Please can someone help on steps/how to setup vpnc client to connect to a remote server. Thanks and Regards. Samson.

Hi, I''m trying to get up and running with rspec on a new project. I''d like to install the rspec and rspec_on_rails plugins (per http://rspec.rubyforge.org/documentation/rails/install.html), but my corporate firewall blocks port 3690 so I can''t access the repository via svn:// I searched the docs and the mailing-list archive to figure out how to install the plugins

Is there a cisco vpn client for linux centso 5 AMD 64 bit? Using google it talks about cisco vpn client but everyplace to download is blocked. I then found a vpnc reference but did not find a 64 bit version. yum install vpnc did nothing.... What is my next step? Jerry

Hi All, I am switching from Fedora20 to CentOS7 since I now run all my Linux development in a VM and I get a more robust feature set (i.e. shared folders with the host that "just work", etc) The only issue I have thus far is VPN connections. Looking at what's installed on my old Fedora install I suspect I need these packages: kde-plasma-nm-vpnc kde-plasma-nm-openvpn

Anyone got a resource on setting up a CentOS box to connect to a Cisco PIX 5xx VPN using IPSec? I don't know if it matters but an important part of functionality would be split tunneling, I need to maintain that from the windows side of functionality. Thanks! jlc

Hi; I have Centos 5.3 on my laptop, and i have to use Cisco Vpn Client. I seen NetworkManager is capable using VPN with vpnc client. I installed vpnc package but i cant finde any NetworkManager-vpnc package. So when i try to open vpn connections and configure VPN option i cant seen add button as active. It is passive so i cant add new vpn connection. Pls help. -- Abdullah Teke

Hello, Today I succesfully transfered some testfile on my local computer with the following command: rsync -e "ssh" testfile.txt localhost:receive I can also succesfully connect with SSH to a remote server through an http proxy with the following command: ssh -o "ProxyCommand corkscrew myhttpProxy 8080 targetcomputer.domain 22" targetcomputer.domain But I'm so far

Hello all, I had setup shorewall before succesfully with a normal LAN to internet connection. Now I''m connected to the internet via VPN and I got problems with configuring Shorewall. Any help is appreciated. This is my setup: - Gentoo Linux laptop (kernel gentoo-dev-sources-2.6.8.1) with Shorewall 2.0.4 (setup for Standalone one interface) and iptables 1.2.11 - VPN client is

What's the best bet for getting vpnc on v5.1? Compile from cource, DAG repo, other repo? Compiled from source I can't seem to get a response from the target. THANKS, Terry -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL:

Hi all, I tried to use the ProxyCommand option in the ~/.ssh/config file like ProxyCommand /usr/local/bin/corkscrew <firewall> 80 %h %p but it seems th me that the ssh clinet won't use the option .. How can I tell the client to accept the proxy an send all requests to this host, bcause the internet names ("%P") cannot be resolved inside our lan - this must do the proxy.