similar to: tinc vpn interface specific dns under Linux

given machine with C6 x86_64 (seen on C 6.6 but also before and probably still present on C6.7) only 1 interface, there is dhcp on this network (for kickstarting) but the machines have static ip's, and NO networkmanager installed contents of resolv.conf search some.domain.here nameserver x.x.x.x #dns1 nameserver y.y.y.y #dns2 change resolv.conf to: search some.newdomain.here nameserver

Dear Simon, every second IP-address is unwanted. We restarted? eno4: nmcli con down eno4; nmcli con up eno4 and the second address vanishes. Then after a few ours, the second ip address reappears. This is the config-file of eno2: # cat ifcfg-eno2 TYPE=Ethernet PROXY_METHOD=none BROWSER_ONLY=no BOOTPROTO=none DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=no IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes

On my CentOS 6 partition of my laptop: First note that for this test, NetworkManager is not running because I did: chkconfig --del NetworkManager and then rebooted. Here is my ifcfg-eth0: DEVICE="eth0" NM_CONTROLLED="no" ONBOOT=no HWADDR=xx:xx:xx:xx:xx:xx TYPE=Ethernet BOOTPROTO=none IPADDR=192.168.2.5 PREFIX=24 GATEWAY=192.168.2.1 DNS1=192.168.2.1 DNS2=192.168.2.1

> Date: Monday, October 03, 2016 22:00:07 -0400 > From: TE Dukes <tdukes at palmettoshopper.com> > >> From: Gordon Messmer >> Sent: Monday, October 3, 2016 4:25 PM >> >> On 10/03/2016 04:54 AM, TE Dukes wrote: >> > I can get the guest to access the internet but have tried every >> > was possible to be able to access the guest from the LAN

Hi all, I have a CentOS 5.4 server-only installation, i.e. no X installed, and for some odd reason /etc/resolve.conf gets overwritten by NetworkManager on a constant basis. I haven't been able to track down how often, but I think it's on the hour, or something. This is the conents of the file right now: # Generated by NetworkManager # No nameservers found; try putting DNS servers into

Dear Simon, > And can you diff the config of eno1 and eno4. # pwd /etc/sysconfig/network-scripts # diff -u ifcfg-eno1 ifcfg-eno4 --- ifcfg-eno1??? 2020-09-21 17:23:25.576672703 +0200 +++ ifcfg-eno4??? 2020-09-22 07:18:43.160532532 +0200 @@ -3,15 +3,20 @@ ?BROWSER_ONLY=no ?BOOTPROTO=none ?DEFROUTE=no -IPV4_FAILURE_FATAL=yes -IPV6INIT=no -IPV6_AUTOCONF=no +IPV4_FAILURE_FATAL=no

Dear All, I am trying to enable router mode of tinc on Windows 7 platform. Although I have enabled the router mode and IP routing in Windows 7 PC (Network A Server). The PC B is still unable to connect the Network A and PC A. But the Network A and PC A is able to communicate each other via tinc. Please help and advise me any incorrect of that. Network A server Real - LAN adapter IP:

On Mon, Dec 02, 2019 at 06:51:44PM -0600, Michael Hennebry wrote: > I've chacked on that. > I've made what seemed like promissing changes to > /etc/sysconfig/network-scripts/ifup-post and > /etc/sysconfig/network-scripts/network-functions . > No go. > I still get the search line in resolv.conf . > I've tried putting in search google.com , > but on reboot, it

Hi! I'm currently using Tinc to create a VPN between a Linux server, a Windows server, and my local laptop and desktop computers (both running Windows). I picked an IP in the 10.123.1.x range for each server, and added something like "Subnet = 10.123.1.1/32" to each host config file. It's working very well! What I'd like to do now is expose an extra subnet to the VPN. The

Hello all I am setting up a Centos 6 machine with one network card & one onboard network port. Both are recognized & work. Onboard Network port is unused yet, but is required for dedicated access to LTSP LAN, which would allow older PIII machines to boot from this system. I have installed LTSP but again Networking seems to be the problem area, as the clients won't boot from this

> Are you sure it worked before ? > > This is my take on your named.conf: > > ??? acl mynetworks { > ??????? 192.168.254.0/24; > ??????? 192.168.252.0/24; > ??????? 192.168.251.0/24; > ??????? 192.168.250.0/24; > ???? }; > > ??? options { > ??????? directory???? "/var/named"; > ??????? notify no; > ??????? empty-zones-enable no; > ???????

Hello /etc/sysconfig/network-scripts/ifcfg-eth0 looks like this: # Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) TYPE=Ethernet NAME=eth0 NM_CONTROLLED=no IPV4_FAILURE_FATAL=yes UUID=cc2635ff-3c14-48ba-b19a-84c5b9d36a9d ONBOOT=yes DEVICE=eth0 BOOTPROTO=none HWADDR=00:50:56:01:00:01 BROADCAST=192.168.0.255 IPADDR=192.168.0.10 NETMASK=255.255.255.0 NETWORK=192.168.0.0

Hi, Thanks to John Wice for helping me with an earlier question. My two PCs behind the same router are still having problems connecting. Would appreciate thoughts on what I?m doing wrong? Router: Port 655 forwarded to 192.168.1.45, both TCP and UDP Port 656 forwarded to 192.168.1.51, both TCP and UDP Machine #1. ========== Local IP address on LAN = 192.168.1.45 Windows Firewall

Dear mailing list, How do I make Tinc auto start on Debian 8 Jessie? I’ve compiled and installed the latest stable release tinc-1.0.33 and I’ve tried this: nano /usr/local/etc/tinc/nets.boot Added the netname of my vpn sudo service tinc start Should work according to: https://www.digitalocean.com/community/tutorials/how-to-install-tinc-and-set-up-a-basic-vpn-on-ubuntu-14-04

Hi - Thanks to Sven-Haegar and Donald, but still having issues setting up with Windows. Machine1 can't ping the VPN address of machine2. Regular IPv4 address for both machines in 192.168.1.xxx range. Router: Forwarding port 655 to 101.102.103.1, UDP and TCP Forwarding port 656 to 101.102.103.2, UDP and TCP Tinc.conf on machine user1 just three lines: Name = vpnuser1 ConnectTo =

yes, I have these in C host file: Subnet=10.10.0.0/24 Subnet=0.0.0.0/1 Subnet=128.0.0.0/1 ## not metioned, because I think is maybe works in same as 0.0.0.0/1 B host file doesn't have 0.0.0.0/1 and 128.0.0.0/1 I only added one route to 5.6.7.8 via B, not via C On Mon, Feb 29, 2016 at 4:40 PM, Maxim Vorontsov <6012030 at gmail.com> wrote: > hi. > > Are you add only

On 11/05/2015 12:14 PM, Reindl Harald wrote: > > > Am 05.11.2015 um 18:08 schrieb Steve Ankeny: >> 'network-manager' is not installed but 'resolvconf' is -- >> >> adam at eagle:~$ cat /etc/resolv.conf >> # Dynamic resolv.conf(5) file for glibc resolver(3) generated by >> resolvconf(8) >> # DO NOT EDIT THIS FILE BY HAND -- YOUR

dear All, I'm facing this routing problem, the setup is actualy part of ltsp, but I think this problem is Centos-specific. The server is a Dell Poweredge R210. The install is standard 6.4, updated. I have one nic facing the public internet: vi /etc/sysconfig/network-scripts/ifcfg-em1 DEVICE=em1 BOOTPROTO=none HWADDR=d4:ae:52:c1:28:2b NM_CONTROLLED=no ONBOOT=yes TYPE=Ethernet

I'm having some issues with Internet access from CentOS7 server which is installed in Vmware Workstation 10.0.3 build-1895310 in Windows 7 x64. At this point I can't get if the error is on CentOS configuration or it's another problem so I leave here what I did in order to get Internet working on that VM. 1) */etc/resolv.conf* # Generated by NetworkManager nameserver 8.8.8.8 nameserver

Hello, I have faced some problems : 1. With iptables running i can't ping my tincvpn server but as i turn it off i can. i have added all rules mentioned in examples but no success. 2. I want to get internet access on the client which is a win 7 computer using tincVPN but i gained no success either (i can't use bridges because server is a VPS using OpenVZ) so any advice for solving this