similar to: Create a VPN network with some PC clients.

Displaying 20 results from an estimated 1000 matches similar to: "Create a VPN network with some PC clients."

2004 Oct 08
1
Trust between two samba domains
I have a problem with Samba: I want to make trust between two Samba domains. I have setup the trust on the DOMAINB server then on the Samba DOMAINA server "net rpc trustdom establish DOMAINB" I then get the following: Password: [entered password] Could not connect to server SERVERB [this is the PDC for the DOMAINB domain] Trust to domain DOMAINB established When I then try
2004 Oct 06
5
Trust between two samba
I have a problem with Samba: I want to make trust between two Samba domains. I have setup the trust on the DOMAINB server then on the Samba DOMAINA server "net rpc trustdom establish DOMAINB" I then get the following: Password: [entered password] Could not connect to server SERVERB [this is the PDC for the DOMAINB domain] Trust to domain DOMAINB established When I then try
2008 Nov 26
1
samba 3.2.4 WINs problem
Hello All, i have a PDC running on subnet 192.168.100.x, and i have set wins support = yes. i have another subnet 192.168.101.x where all my client windows 2k/XP/2003/samba clients reside. For some reason the WINs server doesn't update its entries whenever a client changes IP address -- it still serves up the previous ip address mapping. This only seems to be a problem with samba-based
2003 Feb 04
1
Totally SNAT confused :)
Hi ! I have setup a complete shorewall now with DMZ, and Private zones and masq, rules, port-forwarding etc. worx like expected. BUT I have a wish to use a couple of more public IP''s and relate those to inernal servers on the DMZ zone and i am now so confused about it. I have searched this archive for SNAT port allow Setup: 3 public adresses on the WAN nic. lets call them 80.80.80.80 -
2007 Dec 13
2
How do I do this?
I have 2 asterisk servers - serverA and serverC - connected via IAX2. On serverA, I have a "telemarketer hold" extension which, if I transfer a caller into it, loops around playing music & "please wait" messages, until they give up & hang up the phone. Also on serverA, I have a custom devstate, which lights a lamp on a phone connected to serverA, which tells me if
2020 Jul 01
3
Samba-4.10.4 strange behaviour
Hello All, I'm new to the list and I don't have much of experience with samba. I have a test setup on CentOS 7.8 with samba-4.10.4 and samba-vfs-glusterfs . When my client mounts the samba share via vers=1.0 , the user sees the share properly (uid,gid,mode are just like on gluster). When the share is mounted with vers=2.0 or not specified (anything higher) the files are owned by
2010 Aug 04
1
callerid between 2 asterisk servers
I've got 2 asterisk servers on the same box: ubuntu 10.04 lucid. I have not been able to send useful callerid info between them (callerid becomes "serverB"). serverA register statement: (serverB has the exact opposite statement) register => serverA:serverApassword at IP_of_serverB_nic/serverB users.conf of serverA: users.conf of serverB: [serverB] [serverA] type=friend
2024 Oct 13
1
SSH host key rotation – known_hosts file not updated
Hi, I created new host keys on serverA, updated sshd_config accordingly (adding the line below) and restarted ssh: cd /etc/ssh sudo ssh-keygen -f 2024_ssh_host_ed25519_key -t ed25519 -N '' sudo vi /etc/ssh/sshd_config # added line: HostKey /etc/ssh/2024_ssh_host_ed25519_key sudo service ssh restart When I connect to serverA (`ssh -v -o UpdateHostKeys=yes serverA`) afterwards,
2013 Feb 25
1
samba + nfs locking doesn't work
this is the case: serverA [ CentOs 5.6 kernel 2.6.18-238.12.1.el5.centos.plus, Samba ver. 3.5.21 ] serverB [ CentOS 5.6 kernel 2.6.18-348.1.1.el5.centos.plus, Samba ver. 3.6.6-0.129.el5 ] clientA [ WindowsXP ] clientB [ WindowsXP ] The serverA shares via Samba the resource [test] [global] workgroup = DMIT netbios name = SAMBA server string = DMIT domain server interfaces = eth0
2024 Oct 14
1
Re: SSH host key rotation – known_hosts file not updated
On Sun, 13 Oct 2024, Jan Eden via openssh-unix-dev wrote: > Hi, > > I created new host keys on serverA, updated sshd_config accordingly > (adding the line below) and restarted ssh: > > cd /etc/ssh > sudo ssh-keygen -f 2024_ssh_host_ed25519_key -t ed25519 -N '' > > sudo vi /etc/ssh/sshd_config > # added line: HostKey /etc/ssh/2024_ssh_host_ed25519_key >
2020 Jul 01
3
Samba-4.10.4 strange behaviour
Hi Felix, thanks for the share. Sadly it doesn't work and I don't know how to start debugging this one. I tried your config (had to switch from domain member to standalone) but it's the same: [global] ??????? netbios name = yourName ??????? workgroup = yourWorkgroup ??????? realm = YourRealm ??????? log file = /var/log/samba/log.%m ??????? max log size = 50 ??????? security = ads
2007 Jul 30
1
iax2 trunk registration with auth rsa
hi all, I am trunking via iax2 2 asterisk serverses if both of them have static ip addresses, I can connect them using no password, password or auth rsa with a pair of keys. If one of them has dynamic ip address and need to register on the other server, I can connect them with no password, but I am not able to do that using keys. The question is: which is the right register syntax to use when
2015 Feb 05
2
IAX2 problem for WAN connections
Hi, I am trying to connect two Asterisk servers using IAX2. Everything works fine when I couple them within a LAN segment, but not when I connect them using WAN connections. I made sure that the routers' ports are mapped properly and checked this with additional ssh rules. ServerA is a Raspberry box with the vendor's Asterisk version 1.8.13.1 and ServerB is normal CentOS 7 box with
2007 May 05
1
strange authentication issue
hi I just joined this list, as I am having really strange issue and so far been unable to find the root cause.I will give you scenario to see if anyone knows what could be the cause: 1: 2 windows 64bit enterprise server serverA and Server B 2: both on same physical network no firwalls not routers 3: both on same domain controller ( windows NT4) I can connect to serverA as under from a linux
2008 May 30
3
How to backup files without destroying the destination?!
Hello List, i would like to copy/mirror/rsync the backup files from ServerA to ServerB. Since i must assume that ServerA is hacked (public server with a few services), i would like to "pull" the files to ServerB (save server with no services). That means i do something like: rsync -avz ServerA:/backup ServerB:/backup IF ServerA gets hacked and the files get zeroed out (every file
2005 Jul 22
1
Dfs is not working
Hi, i have a smba 3 working, and I? m trying to build dfs .When I set up my dfs this way: ln ?s msdfs:serverA\\shareA name, or ln-s msdfs:serverA\\shareB, it is working! But if I try ln-s msdfs:serverA\\shareA,serverA\\shareB name, I only can get the first share (shareA) in the network. Have someone did it and how can I succeed ? Daniel
2010 Nov 15
2
SSH keys question
All, I have 3 servers. All 3 are CentOS 5.5. All 3 have identical /etc/ssh/sshd_config files. I used ssh-keygen (with no arguments) to generate keys with no password. I then added all 3 id_rsa.pub keys to the authorized_keys file. With this set up, I should be able to ssh between all 3 boxes without needing a password. The problem is that one of the servers keeps asking for a password even with
2003 Jul 04
1
rsync server and --delete option
Hello, Here is my problem: A rsync daemon is started on serverA with the root user. Now if I try to sync serverA to serverB : rsync -nPru --delete serverA::test/temp/ /temp/ the behavior is just perfect and everything goes well. Now if I try to switch the server : rsync -nPru --delete /temp/* serverA::wwwroot/temp/ the delete option is not working (the files that are not on the sending
2016 Sep 01
2
Dsync config help
I was able to workaround the ?Error: sync: /var/run/dovecot/auth-userdb: Configured passdbs don?t support credentials lookups (to see if user is proxied, because doveadm_port is set)? problem:? => I simply disabled ?doveadm_port? and added the port number at the end of the remote URL in ?mail_replica? Replication seems to work although I have regular errors (idk if they are related to each
2017 Oct 12
2
SSL overview...
Can someone help me understand the overall picture of SSL certificates in this scenario? I have a working dovecot/postfix/mysql server. It has a certificate. I now want to create a second, essentially duplicate configured server for use with replication. What is the relationship between the certificate and the hostname, or the DNS entry since the certs are created using the server?s domain