similar to: ipv6 via tinc

Hi I'm attempting to use ICE to be able to present all possible RTP transports to peers. 16.28.0~dfsg-0+deb11u2 (I know it's old, but unfortunately Asterisk was removed from debian 'stable' and the version in 'sid' is just broken (opus + voicemail don't work anymore). But I ran into an issue when the peer is running rtpengine: Asterisk offers: a=candidate:H9da13901

[It seems the last time this came up was in march, under the heading of "Sony Cybershot should be in hardware notes". This message is intended mainly to document what I've managed to track down.] The m500s still will not sync with pilot-link 0.11.7 in -STABLE. An easily triggerable panic is another issue [1]. The pilot-link code first opens /dev/ugenX and then switches to

Hi guys, I hope you can help me on this issue with kvm/libvirt: using this command to install a kvm virtual machine: virt-install --connect qemu:///system \ --name p3k0401 \ --ram 2048 \ --file //dev/VolGroup01/p3k0401logvol \ --accelerate \ -s 10 \ --nographics \ --hvm \ --location='http://10.1.4.80' I get: Starting install... Retrieving file vmlinuz... | 1.8 MB 00:00

Greetings. I'm a Master's student working on an analysis of herbivore damage on plants. I have a tried running a glm with one categorical predictor (aphid abundance) and a binomial response (presence/absence of herbivore damage). My predictor has four categories: high, medium, low, and none. I used the "ordered" function to sort my categories for a glm. ah <-

Hi all, I noticed that openssh5.5 finally revised this bug, pls check the bugzilla https://bugzilla.mindrot.org/show_bug.cgi?id=1290 but when i test it both on linux and hp-ux, it will still fails: In hp-ux, server side: root at sshia2# /opt/ssh/sbin/sshd -p 1234 -D -h ssh_host_dsa_key -ddd .......... debug3: send_rexec_state: entering fd = 9 config len 322 debug3: ssh_msg_send: type

Hi folks, I read quite some posts about "Destination host unreachable" problems before, but none could help me to solve my issue. So here we go: This is what I am using: SUSE Linux Enterprise Desktop 10 SP1 - Current with all updates Network configuration of my dom0: foobar:~ # ip a 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd

Hi, I''ve fiddled around with xen running on Ubuntu, Debian and now PCLinuxOS. I am running XEN on a very basic network setup: eth0 is a standard ethernet link, and the loopback device lo: eth0 Link encap:Ethernet HWaddr 00:17:08:40:DF:D3 inet addr:192.168.101.1 Bcast:192.168.101.255 Mask:255.255.255.0 inet6 addr: fe80::217:8ff:fe40:dfd3/64

https://bugzilla.mindrot.org/show_bug.cgi?id=1847 Summary: SFTP doen't work well with IPV6 address Product: Portable OpenSSH Version: 5.6p1 Platform: All OS/Version: Linux Status: NEW Severity: normal Priority: P2 Component: sftp AssignedTo: unassigned-bugs at mindrot.org ReportedBy:

Hi, I have been a shorewall user for a long time now, and it has been working flawlessly. I have now changed ISP and my new DSL connection is PPPoE. My setup is as follows: internet <--------> 3com812 Officeconnect (bridge mode) <----> eth0 <-------> linux box <----> eth1, eth2, eth3, eth4 <---> other internal networks Things are working fine, but the link is

Dear All, I am trying to use the hostcertificate to do the hostbaed authentication with the steps in the regress/cert-hostkey.sh But it seems that it can not login with the hostcertificate.: Here is debug message from the ssh client : ssh -2 -oUserKnownHostsFile=/opt/ssh/etc/known_hosts-cert \ > -oGlobalKnownHostsFile=/opt/ssh/etc/known_hosts-cert sshia3 -p 1111 -vvv debug1: checking

(If this is a double post, I apologize, my email client crashed when I first sent it) I need some help to configure a secure network on my Xen server. I have been looking online and it seems a I need a routed network. But I am having a terrible time implementing it. My setup: Xen 3.4.2 CentOS 5.5 Dom0 1 NIC (eth0) All guests will be HVM What I want to do is something similar to a firewall

Hi I'm very new with Xen (/Debian) I have 2 VMs running Windows: "Arch" and "Sql" -- static IPs VM Arch: is ok, accessible thru VNC, Remote Desktop, see the network, etc VM Sql : - just accessible thru VNC             - once I log in, I don't see the network             - pings don't reach peer             - appear 4 network ports on Windows the server has 4

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hye Gurus, i'am newbie on this maillist - and my english is not very good -> sorry! i'am verry interrested in samba using ldap authentifiaction i have see many howto on internet about this subject. However my win XP sp2 do not want connect to my Samba pdc server perhaps something wrong... Ldap authentification works fine ! OS debian

This is mildly off topic since it has more to do with TCP/IP networking than with CentOS per se. However, at the risk of ruffling a few feathers I would like some advice on how to resolve the following routing problem: Given: dual homed host running CentOS-5.2 with eth0 = 2xx.yyy.zzz.23 eth1 = 192.168.219.1 and a Cisco gateway at 2xx.1xx.y7y.1 with the following networks: interface

Anyone have any testing experience with T38 and HT-502 Grandstream? I just want to confirm that t.38 is working on this device. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110801/fea18d8c/attachment.htm>

On Tue, 3 Dec 2024 09:15:36 +0100 Mitja Tav?ar via samba <samba at lists.samba.org> wrote: > Hi, i have some problems with a recently joined Read Only Domain > controller. > > I had 2 Domain Controllers based on Windows Server 2019 (hosts > vmw2srvdc1 an vmw2srvdc2). I and i recently added a new site (PSN) > and Read Only DC in this second site based on samba (host

Il 03/12/24 10:13, Rowland Penny via samba ha scritto: > On Tue, 3 Dec 2024 09:15:36 +0100 > Mitja Tav?ar via samba <samba at lists.samba.org> wrote: > >> Hi, i have some problems with a recently joined Read Only Domain >> controller. >> >> I had 2 Domain Controllers based on Windows Server 2019 (hosts >> vmw2srvdc1 an vmw2srvdc2). I and i recently

Hey all, I''m not sure if this is a ZFS bug or a hardware issue I''m having - any pointers would be great! Following contents include: - high-level info about my system - my first thought to debugging this - stack trace - format output - zpool status output - dmesg output High-Level Info About My System --------------------------------------------- - fresh