similar to: tinc throughput on alix machines

Hi all, I have successfully compiled and installed Asterisk on an Alix board (AMD Geode 500 Mhz + 256 Mb RAM) on top of Voyage linux (a Debian variant). I'm using it at home for a month. I wondered how much it could be loaded, so I tested it with pbx-test: I could place up to 15 simultaneous SIP calls before it got no more responsive. All in all a good, stable and cheap solution for home

I'm playing around with an ALIX 2D2 board (http://www.pcengines.ch/alix2d2.htm). It's a fanless, x86 system using an AMD Geode processor with 256MB of RAM. Also available are two network interfaces, two USB ports and one serial port (no keyboard or VGA). I'm using the Voyage Linux distro, which basically is Debian Lenny optimized for this board. Asterisk 1.6.1.12 runs fine on the

I've given up on getting the other machine to work so I'm looking at building a new one. The machine will be a firewall/gateway running NAT, Web Proxy with Dansguardian, DHCP, DNS, NTP and VPN (~6 clients). I read so much about VPN encryption and the processor needs, now I am unsure if this will work. I can get this for AMD FX-8120 Zambezi 3.1GHz Socket AM3+ 125W Eight-Core Desktop

Hi Everyone, Knowing that running Asterisk on an embedded board like the Alix2d3 requires some fine tuning. Do you know of any good guides out there that does this from beginning to end? Looking to run this in a small office environment. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL:

Has anybody tried running Xen on an ALIX 2D3 board? http://www.pcengines.ch/alix2d3.htm If not, has anybody ran Xen on a seriously underpowered PC? The reason why I love these boards so much is that they run at 5W! Of course, I would only run Xen on these for testing purposes. It would just be nice to have a very low powered system that I can just "blow away" VMs when I

hi, latest changes in dev/ata broke this, on older -stable ... ata0-master: pio=PIO4 wdma=UNSUPPORTED udma=UNSUPPORTED cable=40 wire ad0: success setting PIO4 on National chip ad0: 977MB <SanDisk SDCFB-1024 Rev 0.00> at ata0-master PIO4 on latest -stable: ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire and no disk. cheers, danny

I'm looking for some kind of appliance like box, maybe something like this:http://www.soekris.com/net5501.htm on which I could deploy iptables based firewall/openvpn/DNS and other local network services in a wide area network. I would probably install on a flash device. I would prefer something that was relatively easy to install on, or at least has been used with CentOS before, where

Hi All, I am new to both Ruby and Rails, so please be patient with me. I am currently working on a view for a controller and I have used the following excerpt: <td><%= link_to_image "b_edit", :action => ''edit'', :id => part_prefix %></td> The image is being displayed and the link is working. However, the formatting of image rendered

OS: Debian squeeze Samba: 3.5.6 # testparm --section-name=global -s 2>&1|grep ALIX returns nothing # grep ALIX /etc/samba/smb.conf netbios name = ALIX works -- Regards Harry Jede

Yes please for the notes. I re-ran the tests without the smbldap-tools. I installed phpldapadmin and am able to login to the apache page using the cn=admin, dn=mydomain and create entries. This kind of tells me that LDAP is working Then I run the pdbedit -Lv and it lists all the users. The following happens when I add the LDAP bits to smb.conf and restart samba.The issue seems to be with samba

Hello, I just set up Debian Lenny on a PCEngines ALIX. This board have a GeodeLX processor with hardware crypto accelerator, so I patched my kernel to get cryptodev support. Everything is fine when playin with openssl, but openssh just crash when a large amount of data is transfered. A small example: alix:~# scp 100meg.test localhost:/dev/null root at localhost's password: 100meg.test

https://bugzilla.redhat.com/show_bug.cgi?id=499204 Given I can boot the install disk and chroot in, there must be away around Grub while still keeping LVM installed. Any ideas? Screen says: Booting Centos (2.6.18-194.3.1.el5) root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /vmlinuz-2.6.18-194.3.1.el5 ro root=/dev/VolGroup00/LogVol00 [Linux-bzImage, setup=0x1e00,

Dear R Users, I've used this a long time ago but have forgotten. Trawling aroung the various sources somehow does not lead me to it. How can I execute an error prone function without stopping a script if it goes wrong ? Thanks in advance, Tolga This email is confidential and subject to important disclaimers and conditions including on offers for the purchase or sale of securities, accuracy

hai, im still on holiday but i did see some things a bit, also in addition about the smb.conf in classic mode dns forwarder is predecated, so i suggest avoiding the option. this part, you set ssl off but also set the ports to the ssl ports. ldap ssl = off ldap passwd sync = yes /etc/ldap/ldap.conf BASE dc=mydomain URI ldap://sam3dc.mydomain ldap://sam3dc.mydomain:666 use URI

On Tue, Dec 2, 2014 at 2:26 AM, Gregory Sloop <gregs at sloop.net> wrote: > I love the idea of a low-power high-performance appliance. A NAS will > work fine for storage, but it's not going to act as a DC etc. [At least > none that I'm aware of and would trust.] > > Even appliances sorta like this, that I've seen, are easily five times the > price. > >

Hello, I'm slightly off-topic here, but it is somewhat CentOS related! I'm in search of some hardware that consumes a low amount of power for use as a test-bed for Linux, various coding projects, and LAN services. 1) Low power consumption (10-15W ... maybe 30W at most) 2) Must run Linux without too much fuss (CentOS or otherwise) 3) Must have two NICs (fast ethernet or better) 4) Memory

Any comments on CentOS 5 on Intel Atom CPUs? I need to build a couple of inexpensive systems that will be used primarily as gateway/firewall systems with OpenVPN, and need recommendations in reliable hardware platforms. These will need two NICs. Bill -- INTERNET: bill at celestial.com Bill Campbell; Celestial Software LLC URL: http://www.celestial.com/ PO Box 820; 6641 E. Mercer Way Voice:

Dear all, I wanna create a GNU/Linux that it boots from USB. I don't any idea on that. Can you introduce me a doc that i can use it & i can solve my problem? Cheers, -- ------------------------- Mohsen Pahlevanzadeh email address : mohsen at pahlevanzadeh.org web site : http://pahlevanzadeh.org IRC IM : m_pahlevanzadeh yahoo IM : linuxorbsd ----------------------------

hii all i need some suggestion about implementing samba 4 in multisite environment im still new in samba 4, i have finish install my first samba 4 DC in my centos 6 machine without any problem. i have plan to implement samba 4 in distribute / multisite environment, i have one head quarter office and aroung 20 site office, in my head quarter office i have not more than 50 PC client and in every

Hi everyone, I'm interested in using Tinc for building an overlay network on top of a community network. The overlay may consist of some hundreds of nodes, and devices will most probably not be very powerful (Alix or Commell-like or even less). To make the overlay network topology resemble the real one as much as possible, all nodes would ConnectTo all other nodes. Has anyone worked with a