similar to: Windows client not honorring the Port directive?

Hi all, I have run into the problem on the windows machine that the tinc-up.bat command/file is started too soon. I set-up additional routes there and when I manually start the tinc daemon I get complaints that the routes can not be created because the host (the "other" tinc host) is not local on the network (i.e. the vpn is, according to Windows, not up yet). Is this a known

Hello, I'm about to install SAMBA in a HA (High Avalibility) solution with Solaris 2.6 and First Watch. I have two SAMBA servers that normally runs on two machines, in case of a failure of one of the machine the other machine is supposed to take over the failed machine's services. Also the IP adress is moved (the machine will now have multiple IP adresses (on the same logical net)). So

With pleasure we announce the release of tinc version 1.0.25. Here is a summary of the changes: * Documentation updates. * Support linking against -lresolv on Mac OS X. * Fix scripts on Windows when using the ScriptsInterpreter option. * Allow a minimum reconnect timeout to be specified. * Support PriorityInheritance on IPv6 sockets. Thanks to David Pflug, Baptiste Jonglez, Alexis

With pleasure we announce the release of tinc version 1.0.25. Here is a summary of the changes: * Documentation updates. * Support linking against -lresolv on Mac OS X. * Fix scripts on Windows when using the ScriptsInterpreter option. * Allow a minimum reconnect timeout to be specified. * Support PriorityInheritance on IPv6 sockets. Thanks to David Pflug, Baptiste Jonglez, Alexis

We have had another instance of this..... since I am forwarding to other lists, "this" involves a lost file, due to accidental deletion. in this case, we had a backup, but from the backup time, till deletion time, a lot of data had been lost. So, we have not enough disk space to do hourly backups, novell allowed recovery of a lost file like this, so: is there a filesystem that we

Hi I'm trying to integrate your speex codec on our custom Blackfin board and without uCLinux. I am using ADI-supplied VisualDSP++ IDE and corresponding toolchain. My question is: Is there anybody who ported speex with enabled BFIN_ASM to VisualDSP++ ? Best Regards, Stefan Voss -------------- next part -------------- An HTML attachment was scrubbed... URL:

[ please copy me on answers, since I am not subscribed to the list ] Dear all, I am trying to write an R function which uses system.time to determine which of a given list of R expressions executes fastest. To work around the limited resolution of system.time, I want to convert the given expressions into functions which execute the given expressions a fixed number of times. My current attempt

With pleasure we announce the release of tinc version 1.1pre12. Here is a summary of the changes: * Added a "--syslog" option to force logging to syslog even if running in the foreground. * Fixes and improvements to the DecrementTTL function. * Improved PMTU discovery and UDP keepalive probes. * More efficient relaying of UDP packets through intermediate nodes. * Improved

With pleasure we announce the release of tinc version 1.1pre12. Here is a summary of the changes: * Added a "--syslog" option to force logging to syslog even if running in the foreground. * Fixes and improvements to the DecrementTTL function. * Improved PMTU discovery and UDP keepalive probes. * More efficient relaying of UDP packets through intermediate nodes. * Improved

if I: ssh -fND localhost:6000 somebody at 192.168.56.5 -p PORTNUMBER from computer "A" to computer "B" [B = 192.168.56.5] then I can set the SOCKS proxy for e.g.: Firefox to use "localhost:6000" on computer "A". Ok. I can surf the web through "B". But: - Can anyone sniff the traffic of "A"? [e.g.: computers on same subnet as

I sent to samba list, with the wrong e-mail account, so it never made it... Any help with this is appreciated. Barry Smoke District Network Administrator Bryant Public Schools -----Forwarded Message----- > From: Steve Langasek <vorlon@dodds.net> > To: k12osn@redhat.com > Cc: lrlug-discuss@lrlug.org, samba@lists.samba.org > Subject: [Samba] Re: [K12OSN] Re:

> Framesize always refers to the decoded data frame size in samples. > Framesize is dependent on the encoding mode > Narrowband (8kHz): framesize = 160 samples = 320 bytes of PCM > The size of the encoded data depends on the quality setting, so if you > know for instance that you are using quality 3 on narrowband, that is > 119 bits of encoded data per frame which is rounded to

From: Hank Janssen <hjanssen at microsoft.com> Convert camel case struct fields in vstorage.h to lowercase Signed-off-by: Abhishek Kane <v-abkane at microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz at microsoft.com> Signed-off-by: Hank Janssen <hjanssen at microsoft.com> --- drivers/staging/hv/storvsc.c | 133 +++++++++++++++++++++--------------------

From: Hank Janssen <hjanssen at microsoft.com> Convert camel case struct fields in vstorage.h to lowercase Signed-off-by: Abhishek Kane <v-abkane at microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz at microsoft.com> Signed-off-by: Hank Janssen <hjanssen at microsoft.com> --- drivers/staging/hv/storvsc.c | 133 +++++++++++++++++++++--------------------

Joost Witteveen (joost@iliana.nl) wrote: > > So, each UDP package with 20 bytes speex-data, we send: > > 20 bytes speex > 12 bytes ogg headers (and others?) > 28 bytes UDP/IP headers (2 IP numerbers, 2 portnumbers, checksum, etc, etc) > > and, if it goes over the phone, each package has a few ppp headers. > > Am I overlooking something, or does this fixed frame

At the moment I have 2 network connected in a VPN and I'm planning to extend this. Actual status: Network A has a public IP Network B is behind a provider-scale NAT. Actually I'm using openvpn with a single UDP connection from B to A, and hosts inside Network A can communicate with B. I tried with tinc, and I saw tinc has to go TCP-Only for accomplish this. This is because Tinc

On connection to an incoming call via PSTN where asterisk [11.7.0] is Dialing an internal extension on answering the call there is about 6-7 seconds before audio is heard on either side. When looking at the CLI traces when I answer the incoming call that asterisk extensions were dialing, I see immediately upon answering >0xhexnumber -- Probation passed - setting RTP source address to

hi I know that I could use ssh tunneling: ssh -fND localhost:6000 SOMEBODY at 192.168.56.5 -p PORTNUMBER to surf the web through another machines internet connection -> I just need to set Firefox to use proxy 6000. But: How can I set that on the client side, to e.g.: ping through the machine with openssh-server? Not just setting Firefox to use port 6000. Is there any method for

Hi, and here's the next feature request, which sounds interesting. Also I think I won't need much extra code to add this feature. So what do you guys think? > `ssh' with its host key checking is incompatible with the use of > `redir' to map different ports on a gateway/firewall system to > different systems behind the firewall. > For instance, I redirect ports as

Hi, just out of curiosity: I have a RoR website, and till now I used to deploy it by hand. Now I''ve deployed it automatically, and after this the web site response is much faster. I don''t know if capistrano did something else too, though the speed of how the site runs has increased a lot. there is another thing though: I''m using a shared account on textdrive, and there